Sharper Image Speaker System SR277 User Manual

900MHz Outdoor  
Wireless Speakers  
SR277 Instructions  
Read and save these instructions.  
 
 
Warnings  
To avoid electric shock, do not handle the transmitter base or AC adapters with  
wet hands.  
•Do not attempt to repair or modify this unit.  
•Do not use attachments not recommended by the manufacturer.  
•Do not drop, shock or apply pressure to the unit. This may cause permanent damage.  
Battery Precautions  
•Only use specified C alkaline batteries or equivalent replacements with this unit.  
•Batteries may leak or explode if recharged, inserted improperly, disposed of in  
fire or mixed with different types.  
•When installing batteries, observe proper +/- polarities. Batteries positioned  
incorrectly may leak and cause damage to the unit.  
•Never attempt to recharge conventional dry cell batteries.  
•Replace only with fresh, new batteries.  
•If unit will not be used for a long period of time, remove batteries to prevent  
damage or injury due to possible battery leakage.  
•Keep all batteries away from children.  
General Instructions  
Overview  
This 900MHz speaker system utilizes the latest advances in wireless transmission  
technology to deliver dynamic, high-quality audio from virtually any audio/video  
device, indoors and outdoors up to 150 feet away. Simply connect the transmitter  
to a desired audio source: DVD, CD, TV, VCR, hi-fi system or radio to enjoy wire-  
less, full-spectrum sound without complicated wiring or installation.  
Features  
•High-quality, interference-free sound.  
•900MHz RF transmitter base and speaker receivers.  
•RF technology allows full freedom of movement.  
4
 
Features  
•Operating distance up to 150 feet.  
•RF transmission travels freely through walls, floors and other solid objects.  
•Auto on/off function.  
•Auto tuning function.  
•Remote control unit.  
Parts Identification  
Transmitter  
AC Adapter  
Antenna  
Signal  
Indicator  
Power On  
Indicator  
DC IN 12V  
INPUT  
BAND  
3.5mm Audio  
Input Jack  
Channel Selector  
(Channels 1 and 2)  
DC In Jack  
5
 
Parts Identification  
Speaker Receivers  
Battery Compartment  
Power Indicator  
DC In Jack  
Power  
On/Off  
Button  
Auto Tune  
Button  
Volume +/- Bass Boost  
Buttons Buttons  
Remote  
Auto Tune Button  
Volume +/-  
Buttons  
Power On/Off  
Button  
6
 
Transmitter Operation  
1. To operate the transmitter base, slide the antenna tube over the antenna wire  
until it connects with the base.  
2. Plug the included AC adapter into a standard wall outlet.  
3. Insert the adapter connector plug firmly into the DC IN jack located on the  
rear panel of the transmitter base.  
4. To connect virtually any audio source (CD system, radio/cassette player, TV,  
DVD, VCR, computer, etc.) to the transmitter base, insert the 3.5mm input  
audio cable connector into the desired audio device’s output jack.  
5. A blue POWER indicator illuminates when the AC adapter is plugged in and  
an audio signal reaches the transmitter. If the indicator does not illuminate,  
ensure the adapter is plugged in and the audio source is switched on.Parts  
Speakers  
Battery Operation  
1. To operate the speakers using battery power, turn over both speakers and  
open the battery compartment covers located underneath.  
2. Insert six C alkaline batteries (purchase separately) into each battery compart-  
ment, observing proper +/- polarities as indicated.  
3. Replace both battery compartment covers.  
AC Operation  
1. To operate the speakers using AC power, plug the included 9V power adapters  
into a standard wall outlet.  
2. Insert the power adapter connector plugs firmly into the DC IN jacks located  
underneath each speaker.  
7
 
Speaker Operation  
1. To switch on the speakers, press the ON/OFF button located on the front  
panel of each speaker. A blue power LED illuminates. Power may also be  
switched on from the remote control.  
Note: The ON/OFF button on the remote control does not function as the primary  
power switch for the speakers. To operate the ON/OFF function by remote con-  
trol, speaker power must be switched ON first. (See Power Off.)  
2. To listen to a desired audio source through the speakers, switch on the audio  
device that the transmitter base is connected to. The blue LED on the transmit-  
ter illuminates.  
3. Depending on location, select CHANNEL 1 or 2 on the transmitter base for  
optimal performance.  
4. For optimal reception, ensure the transmitter and speaker receivers are  
approximately 21 feet apart.  
5. To locate the strongest operating frequency, press the AUTO TUNE button  
located on the front speaker panel. When the Auto Tune function is engaged,  
frequency scanning begins automatically and stops when a signal is detected.  
The Auto Tune function may also be activated from the remote control.  
6. You should experience interference-free speaker reception during normal  
room to room or outdoor operation. If interference or poor signal reception  
occurs, press the AUTO TUNE button located on each speaker once (the blue  
LED indicator illuminates) to locate the strongest operating frequency.  
7. If peak reception remains elusive, switch the CHANNEL setting (1 or 2) on the  
transmitter base, then press the AUTO TUNE button on the speakers to locate  
the corresponding frequency.  
8. Use the BASS BOOST function to add a fuller bass sound to any audio program.  
To switch BASS BOOST on, press the BASS BOOST button.  
To switch BASS BOOST off, press the BASS BOOST button again.  
8
 
Speaker Operation  
Note:  
•When transmitting over long distances, the audio signal becomes weaker and  
interference increases.  
•If the source signal is too weak for reception, the transmitter automatically  
switches off after approximately four minutes to protect the unit and save power.  
If the source signal returns to an adequate level, the transmitter automatically  
switches back on.  
Remote Control  
The remote control can be used to operate speaker Power, Auto Tune and  
Volume functions.  
1. To operate the speakers using the remote control, turn the remote over and  
open the battery compartment cover located underneath.  
2. Insert two AAA alkaline batteries (purchase separately) into the battery com-  
partment, observing proper +/- polarities as indicated.  
3. Replace battery compartment cover.  
Note: The ON/OFF button on the remote control does not function as the primary  
power switch for the speakers. To operate the ON/OFF function by remote  
control, speaker power must be switched on first. (See Power Off.)  
Power Off  
To switch off power, press the ON/OFF button on the front panel of the speakers.  
The LED light turns off. Power may also be switched off from the remote control.  
When you use the remote control to power off, the speaker will switch to Standby  
mode for five minutes. The LED changes from blue to green. To switch speaker  
power on during Standby mode, press the ON/OFF button on the remote control.  
If no signal is detected from the remote control for five minutes, the speakers  
automatically switch off. If the transmitter detects no signal for approximately  
4 minutes, the unit switches off automatically.  
Volume Control  
To adjust speaker sound level, press the +/- buttons located on the front panel of  
each speaker until the desired volume is reached. The volume level may also be  
adjusted from the remote control.  
9
 
Troubleshooting  
No Sound  
•Ensure the AC adapter is securely plugged into the wall outlet and the transmitter  
DC IN jack.  
•Ensure the speaker POWER button is in the ON position.  
•Speaker batteries may be too weak. Replace with new batteries or connect with  
the included AC/DC adapter.  
•Ensure the connected audio device is switched on and producing a signal.  
•Ensure that the volume level is set to a moderate level.  
Distortion  
•Ensure the speakers and transmitter are operating on the same frequency. If not,  
press the AUTO TUNE button until both units are operating on the same fre-  
quency.  
•Switch the CHANNEL selector position (1 or 2) on the transmitter base and press  
the AUTO TUNE button on the speakers until the matching frequency is reached.  
•Speaker batteries may be too weak. Replace with new batteries or connect with  
the included AC/DC adapter.  
•Ensure that the volume level is set to a moderate level.  
•The speakers are too far from the transmitter. Move closer to the transmitter base.  
•The audio signal input level is too low. Increase the volume level of the audio source.  
Specifications  
Transmission Mode: UHF mono  
Carrier Frequency:  
Operation Voltage: Transmitter, DC 12.5V 150mA  
Speaker, 6 x C alkaline batteries or DC 9V 1.3A adapter  
Remote Control Unit, 2 x AAA batteries  
Frequency Response: 40Hz - 12KHz  
900MHz  
Distortion:  
S/N Ratio:  
1%  
70 dB (typical)  
Operation Distance: Up to 150 feet  
Optimum Operating  
Temperature:  
Approximately 28°F-138°F  
2 x 5 Watts  
Output Power:  
10  
 
Statement of FCC/DHHS Compliance  
WARNING:  
Changes or modifications to this unit not expressly approved by the party respon-  
sible for compliance could void the user’s authority to operate the equipment.  
NOTE:  
This product complies with DHHS Rule 21 subchapter J at date of manufacture.  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential installa-  
tion. This equipment generates, uses, and can radiate radio frequency energy and,  
if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that inter-  
ference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures:  
•Reorient or relocate the receiving antenna.  
•Increase the separation between the equipment and receiver.  
•Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
•Consult the dealer or an experienced radio/TV technician for assistance.  
FCC Label Compliance Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that  
may cause undesired operation.  
11  
 
Warranty  
This warranty covers any defects in materials or workmanship, with the exceptions stated below.  
How Long Coverage Lasts  
This warranty runs for 90 days from the date of original purchase.  
What Is Not Covered  
This warranty does not cover damage caused by misuse or use other than as intended and described  
in the product instruction manual, or loss or damage to batteries or removable parts.  
What The Sharper Image Will Do  
The Sharper Image will repair any defects in materials or workmanship. In the event repair is not  
possible, The Sharper Image will either replace this product with one of similar features and price,  
or refund the full purchase price of the product, whichever you prefer.  
How to Obtain Service  
Return the product and receipt, along with a brief explanation of the problem, to:  
T.S.I. - Returns Department  
2901-A West 60th Street  
Little Rock, AR 72209  
If you have questions, please feel free to contact our customer service representatives at  
1-800-344-5555 or by email at [email protected].  
This warranty gives you specific legal rights, and you may have other legal rights that vary from state  
to state.  
© 2005 Sharper Image Corporation  
Sharper Image Corporation  
650 Davis St., San Francisco, CA 94111  
(415) 445-6000  
Shop online:  
Due to continuing improvements, actual product may differ slightly from the product described  
herein.  
V3 0305  
 

SharkRack Speaker System T3 R19 H User Manual
Sherwood Stereo Receiver R 865 User Manual
Sony CRT Television KW27FS17 User Manual
Sony Stereo System CMT A70 User Manual
SpeakerCraft Printer PTJ 40 User Manual
StarTechcom Universal Remote SV11151PEXT User Manual
Stovax Stove 7125F User Manual
Sunbeam Electric Heater HE2050 User Manual
Sunbeam Rice Cooker RC4900 User Manual
Sylvania TV DVD Combo 6615LDF User Manual