SharkRack Speaker System T3 R19 H User Manual

T3 Rack Mount Kit  
Installation Instructions  
for the Sun Microsystems StorEdge T3 Array  
T3-R19-H  
Kit Contents  
List # Part #  
Part Name  
Quantity Detail  
1
SH03001  
Rear Mounting Bracket  
2
2
3
4
SH03002  
SH03003  
SH03004  
Right Front Mounting Bracket  
Left Front Mounting Bracket  
Back Plate  
1
1
2
SHP900096-000  
04/13/05 Rev 2  
Page 1 of 5  
Proprietary Information of SharkRack, Inc.  
32920 Alvarado Niles Road Ste 250, Union City, CA 94587  
510-477-7900• 510-324-1664 • www.sharkrack.com  
 
T3 Rack Mount Kit Installation Instructions  
Installation Instructions  
Step  
Detail  
1. Measure the distance from the front rack rail to  
the rear rack rail.  
Distance = _________  
2. Assemble the left front mounting bracket, rear  
mounting bracket, and back plate in the order as  
shown. Set the front and rear mounting brackets  
at the distance measured in step 1.  
3. Secure the left front mounting bracket and rear  
mounting bracket to the back plate using four  
8-32 x 3/8-inch flat head screws.  
Note: Do not tighten the back plate screws at this  
point.  
4. Repeat steps 1 through 3 to assemble the right  
front mounting bracket, rear mounting bracket,  
and back plate.  
5. Install the left front mounting bracket, rear  
mounting bracket, and back plate (assembled in  
step 2) in the left side of the rack enclosure.  
Note: Make sure that the mounting flange on the  
front mounting bracket is on the bottom.  
• Attach the front mounting bracket to the front  
left rack rail using three 10-32 x 1/2-inch pan  
head screws. Use the first, third, and fourth  
screw holes on the front mounting bracket.  
• Attach the rear mounting bracket to the rear  
left rack rail using three 10-32 x 1/2-inch pan  
head screws.  
6. Once the assembly is secure in the rack  
enclosure, tighten the back plate screws (the  
screws installed in step 3).  
7. Repeat steps 5 and 6 to install the right front  
mounting bracket, rear mounting bracket, and  
back plate in the right side of the rack enclosure.  
SHP900096-000  
04/13/05 Rev 2  
Page 3 of 5  
 
T3 Rack Mount Kit Installation Instructions  
Step  
Detail  
8. Remove the feet from the bottom of the  
StorEdge T3 array.  
9. Install the left mounting chassis on the bottom  
left side of the T3 array and secure with two  
10-32 x 1/4-inch flat head screws.  
10. Install the right mounting chassis on the bottom  
right side of the T3 array and secure with two  
10-32 x 1/4-inch flat head screws.  
11. Install the T3 array in the rack enclosure.  
• Approach the rack enclosure with the rear of  
the array facing the rack enclosure.  
• Make sure that the array is resting on top of  
the mounting flange on the left front mounting  
bracket.  
• Slide the array all the way into the rack  
enclosure until it stops.  
12. Secure the T3 array in the rack enclosure by  
tightening the two thumbscrews on the left and  
right chassis mounts.  
SHP900096-000  
04/13/05 Rev 2  
Page 4 of 5  
 
T3 Rack Mount Kit Installation Instructions  
Warranty  
LIMITED WARRANTY AND WARRANTY DISCLAIMER - Seller warrants that the System will be  
free from defects in materials and workmanship for a period of one (1) year from date of delivery  
to customer premises. Seller’s sole liability and Customer’s sole and exclusive remedy for any  
breach of this warranty is, at Seller’s option and expense, to repair or replace any defective  
System that is returned to it by Customer. Seller will have no obligation under this section to the  
extent any defect in the System is caused by or is attributable to negligence, accident, misuse,  
abuse, use of the System than in accordance with Seller’s documentation or user manual,  
modifications, alterations or repairs to the System made by a party other than Seller, or actions of  
third parties or like events outside Seller’s reasonable control. EXCEPT AS EXPRESSLY SET  
FORTH IN THIS SECTION, TO THE EXTENT PERMITTED BY APPLICABLE LAW, SELLER  
DISCLAIMS ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, OR  
STATUTORY, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF  
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUALITY, OR  
NONINFRINGEMENT, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING OR  
USAGE OF TRADE.  
LIMITATIONS OF LIABILITY - IN NO EVENT WILL SELLER BE LIABLE FOR ANY SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST  
PROFITS OR REVENUE, LOSS OF USE, LOST BUSINESS OPPORTUNITIES OR LOSS OF  
GOODWILL), OR FOR THE COSTS OF PROCURING SUBSTITUTE PRODUCTS, ARISING  
OUT OF OR IN CONNECTION WITH THESE TERMS OF SALE OR THE USE OF THE  
SYSTEM, WHETHER SUCH LIABILITY ARISES FROM ANY CLAIM BASED UPON  
CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR  
OTHERWISE, WHETHER OR NOT SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF  
SUCH LOSS OR DAMAGE. IN NO EVENT WILL SELLER’S TOTAL CUMULATIVE LIABILITY,  
FROM ALL CAUSES OF ACTION AND ALL THEORIES OF LIABILITY, EXCEED THE TOTAL  
AMOUNTS ACTUALLY PAID TO SELLER BY CUSTOMER UNDER THE ORDER THAT GIVES  
RISE TO ANY LIABILITY HEREUNDER.  
SHP900096-000  
04/13/05 Rev 2  
Page 5 of 5  
 

Sennheiser Weather Radio EK 2020 D User Manual
Sharp Projector XG P20XU User Manual
Sony Cassette Player CFD 646 User Manual
Sony DVD Recorder DVP LS755P User Manual
Sony Ericsson Bluetooth Headset HBH PV703 User Manual
Sony Home Theater System 5950DP User Manual
Sony VCR SLV SE800K User Manual
Spirit Treadmill Z88 User Manual
Sunbeam Coffeemaker EM5800 User Manual
Sunbeam Cookware FP8400 User Manual