Image Home Gym HGBE89910f User Manual

Model No. HGBE89910  
Serial No.  
Write the serial number in the  
space above for reference.  
USER’S MANUAL  
Serial Number Decal  
QUESTIONS?  
As a manufacturer, we are com-  
mitted to providing complete  
customer satisfaction. If you  
have questions, or if there are  
missing parts, we will guarantee  
complete satisfaction through  
direct assistance from our factory.  
TO AVOID DELAYS, PLEASE  
CALL DIRECT TO OUR TOLL-  
FREE CUSTOMER HOT LINE.  
The trained technicians on our  
customer hot line will provide  
immediate assistance, free of  
charge to you.  
CUSTOMER HOT LINE:  
1-800-999-3756  
Mon.–Fri., 6 a.m.–6 p.m. MST  
CAUTION  
Visit our website at  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Save this manual  
for future reference.  
new products, prizes,  
fitness tips, and much more!  
 
IMPORTANT PRECAUTIONS  
WARNING:  
To reduce the risk of serious injury, read the following important precautions  
before using the weight bench.  
1. Read all instructions in this manual before  
using the weight bench. Use the weight  
bench only as described in this manual.  
6. Make sure all parts are properly tightened  
each time you use the weight bench. Replace  
any worn parts immediately.  
2. It is the responsibility of the owner to ensure  
that all users of the weight bench are ade-  
quately informed of all precautions.  
7. Make sure the adjustment knobs are fully  
engaged into the adjustment brackets before  
using the weight bench.  
3. The weight bench is intended for home use  
only. Do not use the weight bench in a com-  
mercial, rental, or institutional setting.  
8. Always wear athletic shoes for foot protec-  
tion while exercising.  
9. The weight bench is designed to support a  
maximum user weight of 250 pounds and a  
maximum of 210 pounds of weights.  
4. Use the weight bench only on a level surface.  
Cover the floor beneath the weight bench to  
protect the floor.  
10. If you feel pain or dizziness at any time while  
exercising, stop immediately and begin cool-  
ing down.  
5. Keep children under 12 and pets away from  
the weight bench at all times.  
WARNING:  
Before beginning this or any exercise program, consult your physician. This  
is especially important for persons over the age of 35 or persons with pre-existing health problems.  
Read all instructions before using. ICON assumes no responsibility for personal injury or property  
damage sustained by or through the use of this product.  
3
 
BEFORE YOU BEGIN  
Thank you for selecting the versatile IMAGE® 2002  
weight bench. The IMAGE® 2002 is designed to help  
you develop the major muscle groups of the upper  
body. Whether your goal is a shapely figure, an  
increase in muscle size and strength, or a healthier  
cardiovascular system, the IMAGE® 2002 will help you  
achieve the specific results you want.  
toll-free at 1-800-999-3756, Monday through Friday,  
6 a.m. until 6 p.m. Mountain Time (excluding holidays).  
To help us assist you, please note the product model  
number and serial number before calling. The model  
number is HGBE89910. The serial number can be  
found on a decal attached to the weight bench (see  
the front cover of this manual).  
For your benefit, read this manual carefully before  
using the weight bench. If you have additional ques-  
tions, please call our Customer Service Department  
Before reading further, please review the drawing  
below and familiarize yourself with the parts that are  
labeled.  
Seat  
Backrest  
Wheel  
Adjustment Bracket  
Bench Frame  
4
 
PART IDENTIFICATION CHART  
This chart is provided to help you identify the small parts used in assembly. The number  
in parentheses below each part refers to the key number of the part from the PART LIST  
on page 14 of this manual. Important: Some parts may have been pre-assembled for  
shipping purposes. If you cannot find a part in the parts bags, check to see if it  
has been pre-assembled.  
M6 x 16mm Screw (17)  
M10 Washer (22)  
M6 x 38mm Screw (21)  
M10 x 44mm Bolt (15)  
M6 Washer (23)  
M10 x 46mm Button Bolt (18)  
M10 Nylon Locknut (20)  
M6 x 63mm Screw (19)  
M10 x 64mm Carriage Bolt (16)  
5
 
ASSEMBLY  
As you assemble the weight bench, make sure all  
parts are oriented as shown in the drawings.  
Make Things Easier for Yourself  
This manual is designed to ensure that the  
weight bench can be assembled successfully  
by anyone. Most people find that by setting  
aside plenty of time, assembly will go smoothly.  
Tighten all parts as you assemble them, unless  
instructed to do otherwise.  
In addition to the included allen wrench, assem-  
bly requires the following tools (not included):  
Before beginning assembly, carefully read the  
following information and instructions:  
• Two adjustable wrenches  
• One rubber mallet  
Assembly requires two people.  
• Lubricant, such as grease or petroleum jelly.  
For help identifying small parts, use the PART  
IDENTIFICATION CHART on page 5.  
Assembly will be more convenient if you have a  
socket set, a set of open-end or closed-end  
wrenches, or a set of ratchet wrenches.  
Place all parts in a cleared area and remove the  
packing materials. Do not dispose of the packing  
materials until assembly is completed.  
1. Before beginning, make sure that you under-  
stand the information in the box above. Note:  
Some parts described in the assembly steps  
may be pre-assembled.  
1
10  
16  
1
Press a 50mm Square Inner Cap (10) into each  
end of the Rear Stabilizer (1).  
20  
10  
2
Attach the Rear Stabilizer (1) to the indicated end  
of the Bench Frame (2) with two M10 x 64mm  
Carriage Bolts (16) and two M10 Nylon Locknuts  
(20).  
20  
2. Press a 50mm Square Inner Cap (10) into each  
end of the Front Stabilizer (3).  
2
2
Attach the two Wheels (13) to the brackets on the  
Front Stabilizer (3) with two M10 x 46mm Bolts  
(18) and two M10 Nylon Locknuts (20).  
Attach the Front Stabilizer (3) to the indicated end  
of the Bench Frame (2) with two M10 x 64mm  
Carriage Bolts (16) and two M10 Nylon Locknuts  
(20).  
10  
20  
10  
3
18  
13  
20  
16  
18  
13  
6
 
3. Press a 50mm Thick Square Inner Cap (11) into  
each end of the Seat Frame (4).  
3
Wide  
End  
7
Orient the Seat (7) as shown. Attach the Seat to  
the Seat Frame (4) with two M6 x 16mm Screws  
(17), an M6 x 63mm Screw (19), and an M6  
Washer (23).  
11  
4
11  
23  
19  
17  
4. Press two 1” Square Inner Caps (12) into each  
Backrest Frame (6).  
4
12  
6
15  
Orient the Backrest Frames (6) exactly as shown.  
Attach the Adjustment Bracket (5) to the Backrest  
Frames with four M10 x 44mm Bolts (15) and  
four M10 Nylon Locknuts (20).  
6
12  
20  
20  
5
5. Orient the Backrest (8) as shown. Attach the  
Backrest to the Backrest Frames (6) with four M6  
x 38mm Screws (21) and four M6 Washers (23).  
Note: If the holes in the Backrest Frames do not  
line up with the holes in the Backrest, go back to  
assembly step 4, loosen the M10 Nylon Locknuts  
(20), adjust the positions of the Backrest Frames,  
and then retighten the Nylon Locknuts.  
5
8
6
6
23  
Wide  
End  
21  
23  
23  
21  
23  
21  
21  
7
 
6. Refer to the inset drawing. Pull out the indicat-  
ed Adjustment Knob (9) as far as possible. Tip  
the Seat (7) toward the Knob, and insert the Seat  
Frame (4) between the two tubes of the Bench  
Frame (2) as shown. Make sure that the pin on  
the Seat Frame is under the right tube. Next,  
slide the Seat Frame forward until the indicated  
hole is aligned with the small tube on the Bench  
Frame. Then, release the Adjustment Knob so  
that it engages one of the adjustment holes in the  
Seat Frame.  
6
20  
22  
22  
6
14  
4
5
9
Lubricate  
Next, pull out the other Adjustment Knob (9) as  
far as possible. Insert the Adjustment Bracket (5)  
between the two tubes of the Bench Frame (2),  
and then release the Adjustment Knob so that it  
engages one of the middle adjustment holes in  
the Adjustment Bracket.  
2
9
4
Hole  
7
Tube  
Lubricate the M10 x 231mm Hex Bolt (14). Attach  
the Backrest Frames (6) and the Seat Frame (4)  
to the Bench Frame (2) with the Bolt, two M10  
Washers (22), and an M10 Nylon Locknut (20).  
Do not overtighten the Nylon Locknut; the  
Seat Frame and the Backrest Frames must be  
able to pivot easily.  
Pin  
9
2
7. Make sure that all parts are properly tightened before you use the weight bench. The use of the remain-  
ing parts will be explained in ADJUSTMENTS, starting on the following page.  
8
 
ADJUSTMENTS  
The weight bench is designed to be used with the weight rack (HGBC59910/HGBM59910/HGBO59910) and set  
of dumbbells (HGWT05910) included with the HIDDEN GROVE furniture. The steps below explain how the  
weight bench can be adjusted. See EXERCISE GUIDELINES on page 11 for important exercise information, and  
refer to the accompanying exercise guide to see the correct form for each exercise.  
Make sure that all parts are properly tightened each time you use the weight bench. Replace any worn parts  
immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not  
use solvents.  
ADJUSTING THE SEAT  
7
To adjust the Seat (7), pull out the front Adjustment  
9
Knob (9) as far as possible. Move the Seat to the  
desired position, and then release the Adjustment  
Knob so that it engages one of the adjustment holes  
in the Seat Frame.  
WARNING:  
Make sure that the  
Adjustment Knob (9) is fully inserted into an  
adjustment hole in the Seat Frame (4) before  
using the weight bench.  
ADJUSTING THE BACKREST  
8
The Backrest (8) can be used in a declined position,  
a level position, or one of four inclined positions. To  
adjust the Backrest, pull out the rear Adjustment Knob  
(9) as far as possible. Move the Backrest to the  
desired position, and then release the Adjustment  
Knob so that it engages one of the adjustment holes  
in the Adjustment Bracket.  
9
WARNING:  
Make sure that the  
Adjustment Knob (9) is fully inserted into an  
adjustment hole in the Adjustment Bracket (5)  
before using the weight bench.  
Adjustment  
Holes  
5
9
 
STORING THE WEIGHT BENCH  
Uprights  
To store the weight bench, place the Wheels (13) in  
the base bracket on the weight rack included with the  
HIDDEN GROVE furniture. Lift the Rear Stabilizer (1)  
so that it rests between the uprights.  
13  
Base  
Bracket  
1
10  
 
EXERCISE GUIDELINES  
THE FOUR BASIC TYPES OF WORKOUTS  
PERSONALIZING YOUR EXERCISE PROGRAM  
Muscle Building  
To increase the size and strength of your muscles,  
Determining the exact length of time for each workout,  
as well as the number of repetitions or sets completed,  
push them close to their maximum capacity. Your mus- is an individual matter. It is important to avoid overdo-  
cles will continually adapt and grow as you progres-  
sively increase the intensity of your exercise. You can  
adjust the intensity level of an individual exercise in  
two ways:  
• by changing the amount of weight used  
• by changing the number of repetitions or sets per-  
formed. (A “repetition” is one complete cycle of an  
exercise, such as one sit-up. A “set” is a series of  
repetitions.)  
ing it during the first few months of your exercise pro-  
gram. You should progress at your own pace and be  
sensitive to your body’s signals. If you experience pain  
or dizziness at any time while exercising, stop immedi-  
ately and begin cooling down. Find out what is wrong  
before continuing. Remember that adequate rest and a  
proper diet are important factors in any exercise pro-  
gram.  
WARMING UP  
The proper amount of weight for each exercise  
depends upon the individual user. You must gauge  
Begin each workout with 5 to 10 minutes of stretching  
your limits and select the amount of weight that is right and light exercise to warm up. Warming up prepares  
for you. Begin with 3 sets of 8 repetitions for each  
exercise you perform. Rest for 3 minutes after each  
set. When you can complete 3 sets of 12 repetitions  
without difficulty, increase the amount of weight.  
your body for more strenuous exercise by increasing  
circulation, raising your body temperature and deliver-  
ing more oxygen to your muscles.  
WORKING OUT  
Toning  
You can tone your muscles by pushing them to a mod- Each workout should include 6 to 10 different exercis-  
erate percentage of their capacity. Select a moderate  
amount of weight and increase the number of repeti-  
tions in each set. Complete as many sets of 15 to 20  
repetitions as possible without discomfort. Rest for 1  
minute after each set. Work your muscles by complet-  
ing more sets rather than by using high amounts of  
weight.  
es. Select exercises for every major muscle group,  
emphasizing areas that you want to develop most. To  
give balance and variety to your workouts, vary the  
exercises from session to session.  
Schedule your workouts for the time of day when your  
energy level is the highest. Each workout should be  
followed by at least one day of rest. Once you find the  
schedule that is right for you, stick with it.  
Weight Loss  
To lose weight, use a low amount of weight and  
increase the number of repetitions in each set.  
Exercise for 20 to 30 minutes, resting for a maximum  
of 30 seconds between sets.  
EXERCISE FORM  
Maintaining proper form is an essential part of an  
effective exercise program. This requires moving  
through the full range of motion for each exercise, and  
Cross Training  
Cross training is an efficient way to get a complete and moving only the appropriate parts of the body.  
well-balanced fitness program. An example of a bal-  
anced program is:  
• Plan weight training workouts on Monday,  
Wednesday, and Friday.  
• Plan 20 to 30 minutes of aerobic exercise, such as  
cycling or swimming, on Tuesday and Thursday.  
• Rest from both weight training and aerobic exercise  
for at least one full day each week to give your body  
time to regenerate.  
Exercising in an uncontrolled manner will leave you  
feeling exhausted. On the exercise guide accompany-  
ing this manual you will find photographs showing the  
correct form for several exercises, and a list of the  
muscles affected. Refer to the muscle chart on page  
12 to find the names of the muscles.  
The repetitions in each set should be performed  
smoothly and without pausing. The exertion stage of  
each repetition should last about half as long as the  
return stage. Proper breathing is important. Exhale  
The combination of weight training and aerobic exer-  
cise will reshape and strengthen your body, plus devel- during the exertion stage of each repetition and inhale  
op your heart and lungs. during the return stroke. Never hold your breath.  
11  
 
Rest for a short period of time after each set. The  
ideal resting periods are:  
• Rest for three minutes after each set for a muscle  
building workout.  
slowly as you stretch and do not bounce. Ease into  
each stretch gradually and go only as far as you can  
without strain. Stretching at the end of each workout  
is an effective way to increase flexibility.  
• Rest for one minute after each set for a toning work-  
out.  
STAYING MOTIVATED  
• Rest for 30 seconds after each set for a weight loss  
workout.  
Plan to spend the first couple of weeks familiarizing  
yourself with the equipment and learning the proper  
form for each exercise.  
For motivation, keep a record of each workout. The  
chart on page 13 of this manual can be photocopied  
and used to schedule and record your workouts. List  
the date, the exercises performed, the weight used,  
and the numbers of sets and repetitions completed.  
Record your weight and key body measurements at  
the end of every month. Remember, the key to  
achieving the greatest results is to make exercise a  
regular and enjoyable part of your everyday life.  
COOLING DOWN  
End each workout with 5 to 10 minutes of stretching.  
Include stretches for both your arms and legs. Move  
MUSCLE CHART  
N
O
P
A. Sternomastoid (neck)  
B. Pectoralis Major (chest)  
C. Biceps (front of arm)  
D. Obliques (waist)  
A
B
E. Brachioradials (forearm)  
F. Hip Flexors (upper thigh)  
G. Abductor (outer thigh)  
H. Quadriceps (front of thigh)  
I. Sartorius (front of thigh)  
J. Tibialis Anterior (front of calf)  
K. Soleus (front of calf)  
C
D
E
Q
R
S
F
L
T
L. Rectus Abdominus (stomach)  
M. Adductor (inner thigh)  
G
M
N. Trapezius (upper back)  
O. Rhomboideus (upper back)  
P. Deltoid (shoulder)  
H
I
U
V
Q. Triceps (back of arm)  
J
K
W
R. Latissimus Dorsi (mid back)  
S. Spinae Erectors (lower back)  
T. Gluteus Medius (hip)  
U. Gluteus Maximus (buttocks)  
V. Hamstring (back of leg)  
W. Gastrocnemius (back of calf)  
12  
 
EXERCISE  
WEIGHT  
WEIGHT  
WEIGHT  
SETS  
SETS  
SETS  
REPS  
REPS  
REPS  
MONDAY  
Date:  
/
/
AEROBIC EXERCISE  
EXERCISE  
TUESDAY  
Date:  
/
/
WEDNESDAY  
Date:  
/
/
AEROBIC EXERCISE  
EXERCISE  
THURSDAY  
Date:  
/
/
FRIDAY  
Date:  
/
/
Make photocopies of this page for scheduling and recording your workouts.  
13  
 
PART LIST—Model No. HGBE89910  
R1201A  
Key No. Qty.  
Description  
Key No. Qty.  
Description  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
1
1
1
1
1
2
1
1
2
4
2
4
2
Rear Stabilizer  
Bench Frame  
Front Stabilizer  
Seat Frame  
Adjustment Bracket  
Backrest Frame  
Seat  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
#
1
4
4
2
2
1
11  
4
2
5
M10 x 231mm Hex Bolt  
M10 x 44mm Bolt  
M10 x 64mm Carriage Bolt  
M6 x 16mm Screw  
M10 x 46mm Button Bolt  
M6 x 63mm Screw  
M10 Nylon Locknut  
M6 x 38mm Screw  
M10 Washer  
M6 Washer  
User’s Manual  
Exercise Guide  
Backrest  
Adjustment Knob  
50mm Square Inner Cap  
50mm Thick Square Inner Cap  
1” Square Inner Cap  
Wheel  
1
1
#
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover  
of this manual for information about ordering replacement parts.  
14  
 
EXPLODED DRAWING—Model No. HGBE89910  
R1201A  
8
6
12  
15  
6
20  
22  
23  
7
23  
23  
11  
12  
22  
21  
23  
21  
21  
14  
4
20  
16  
20  
10  
5
23  
11  
17  
9
20  
19  
1
10  
9
2
20  
20  
10  
3
18  
13  
20  
16  
13  
10  
18  
15  
 
ORDERING REPLACEMENT PARTS  
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday  
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre-  
pared to give the following information when calling:  
• The MODEL NUMBER of the product (HGBE89910)  
• The NAME of the product (IMAGE® 2002 weight bench)  
• The SERIAL NUMBER of the product (see the front cover of this manual)  
• The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED  
DRAWING on pages 14 and 15 of this manual).  
LIMITED WARRANTY  
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-  
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This  
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing  
or repairing, at ICON's option, the product at one of its authorized service centers. All products for which war-  
ranty claim is made must be received by ICON at one of its authorized service centers with all freight and other  
transportation charges prepaid, accompanied by sufficient proof of purchase. All returns must be pre-autho-  
rized by ICON. This warranty does not extend to any product or damage to a product caused by or attribut-  
able to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an ICON  
authorized service center, products used for commercial or rental purposes, or products used as store display  
models. No other warranty beyond that specifically set forth above is authorized by ICON.  
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection  
with the use or performance of the product or damages with respect to any economic loss, loss of property,  
loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequential dam-  
ages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequen-  
tial damages. Accordingly, the above limitation may not apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-  
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.  
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation  
may not apply to you.  
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.  
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813  
Part No. 181657 R1201A  
Printed in China © 2001 ICON Health & Fitness, Inc.  
 

Graco Baby Swing PD171513B User Manual
Grizzly Lathe H8103 User Manual
Harbor Freight Tools Landscape Lighting 90729 User Manual
Havis Shields Automobile Accessories C VS 1000 TAH User Manual
Havis Shields Automobile KK K9 D14 K User Manual
Hawking Technology Network Router H BR49 User Manual
Honeywell Door 6271 User Manual
Hotpoint Washer WMYF 842 User Manual
Hotpoint Washer WMYL 6151 User Manual
Humminbird Fish Finder Wide 3D Vision User Manual