Humminbird Car Video System 531655 1_A User Manual

1
531655-1_A  
1100 Series™ In-Dash Mounting Kit  
Thank You  
Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its  
reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment.  
Genuine Humminbird® accessories offer the opportunity to upgrade and expand the capabilities  
of your Humminbird® product.  
Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In  
the unlikely event that your Humminbird® does require repairs, we offer an exclusive Service  
Policy - free of charge during the first year after purchase, and available at a reasonable rate after  
the one-year period. For complete details, see the Warranty section included in this manual.  
Contact our Customer Resource Center at either 1-800-633-1468 or visit our website at  
Installation Overview  
Following are instructions for the installation of this accessory. Before you start installation, we  
encourage you to read these instructions carefully in order to get the full benefit from your  
Humminbird® accessory.  
If you find that any items are missing from your installation kit, call our Customer Resource Center  
at 1-800-633-1468 or visit our website at www.humminbird.com.  
Installation  
Start by placing the components on the surfaces where you intend to install them before  
installation. Make sure that the surfaces you have chosen provide adequate protection from  
wave shock, and that all cables can reach the control head.  
NOTE: If a cable is too short for your application, extension cables are available.  
Call Humminbird® Customer Support at 1-800-633-1468 for more information.  
Parts and tools specific to In-dash mounting are:  
• Threaded rods and hardware  
• In-dash mounting foam pads  
• In-dash mounting template  
• Reciprocating saw for cutting dash material  
• Masking tape to hold mounting template in place.  
1. Locate a suitable, flat area of the dash to mount the control head. The control head  
requires a depth of at least 4 inches (102 mm).  
Mounting the Control Head  
Foam Pads  
Threaded Rod  
Washer  
2. Tape the paper In-Dash Mounting template to the desired in-dash mounting location.  
3. At a location inside the dotted line on the template, drill a hole large enough to insert  
blade of reciprocating saw. In addition, drill the 4 mounting hole locations using a 3/16"  
drill bit. Carefully begin cutting toward the dotted line, then follow the dotted line  
around the template. Remove the template when finished.  
Cut  
Away  
Dash  
Wing Nut  
Lock Washer  
4. Insert and tighten the four threaded rods into the four threaded inserts located on the  
back side of the control head. Peel off the adhesive-backed foam pads and place them  
on the back of the control head; make sure you notice the difference between the  
longer top/bottom and shorter side pads.  
Foam Pads  
© 2008 Humminbird®, Eufaula AL, USA.  
All rights reserved.  
 
3
531655-1_A  
1100 Series™ In-Dash Mounting Kit  
1-Year Limited Warranty  
Humminbird® Service Policy  
We warrant the original retail purchaser that products made by  
Humminbird® have been manufactured free from defects in materials  
and workmanship. This warranty is effective for one year from the date  
of original retail purchase. Humminbird® products found to be defective  
and covered by this warranty will be replaced or repaired free of charge  
at Humminbird® option and returned to the customer freight prepaid.  
Humminbird® sole responsibility under this warranty is limited to the  
repair or replacement of a product that has been deemed defective by  
Humminbird®. Humminbird® is not responsible for charges connected  
with the removal of such product or reinstallation of replaced or  
repaired parts.  
Even though you'll probably never need to take advantage of our  
incredible service policy, it's good to know that we back our products  
this confidently. We do it because you deserve the best. We will make  
every effort to repair your unit within three business days from the  
receipt of your unit at our factory. This does not include shipping time to  
and from our factory. Units received on Friday are typically shipped by  
the following Wednesday, units received Monday are typically shipped  
by Thursday, etc.  
All repair work is performed by factory-trained technicians to meet  
exacting factory specifications. Factory-serviced units go through the  
same rigorous testing and quality control inspections as new  
production units.  
This warranty does not apply to a product that has been:  
• Improperly installed;  
After the original warranty period, a standard flat rate service charge  
will be assessed for each repair (physical damage and missing parts are  
not included). Any repairs made after the original warranty will be  
warranted for an additional 90 days after service has been performed  
by our factory technicians. You can contact our Customer Resource  
Center or visit our website to verify the flat rate repair fee for your  
product (visit the Product Support section):  
• Used in an installation other than that recommended in the  
product installation and operation instructions;  
• Damaged or has failed because of an accident or abnormal  
operation;  
• Repaired or modified by entities other than Humminbird®.  
Please retain your original receipt as a proof of the purchase date. This  
will be required for in-warranty service.  
We reserve the right to deem any product unserviceable when  
replacement parts are no longer available or impossible to obtain. This  
Service Policy is valid in the United States only. This applies only to  
Humminbird® products returned to our factory in Eufaula, Alabama.  
This Service Policy is subject to change without notice.  
THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES,  
OBLIGATIONS OR LIABILITIES ON THE PART OF HUMMINBIRD® AND  
WILL BE THE CUSTOMER'S EXCLUSIVE REMEDY, EXCEPT FOR ANY  
APPLICABLE IMPLIED WARRANTIES UNDER STATE LAW WHICH ARE  
HEREBY LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF  
ORIGINAL PURCHASE. IN NO EVENT WILL HUMMINBIRD® BE LIABLE  
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH  
OF ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE  
PRODUCTS.  
Some states do not allow limitations on an implied warranty, or the  
exclusion of incidental or consequential damages, so the above  
exclusions may not apply to you. You may also have other rights, which  
vary from state to state.  
© 2008 Humminbird®, Eufaula AL, USA.  
All rights reserved.  
 
4
531655-1_A  
1100 Series™ In-Dash Mounting Kit  
Returning Your Unit for Service  
Contact Humminbird®  
Before sending your unit in for repair, please contact the factory, either  
by phone or by email, to obtain a Repair Authorization Number for your  
unit. Please have your product model name and serial number  
available before calling the factory. If you contact the factory by e-mail,  
please include your product model name and serial number in the e-  
mail, and use Request for Repair Authorization Number for your e-mail  
subject header. You should include your Repair Authorization Number in  
all subsequent communications about your unit.  
Contact the Humminbird® Customer Resource Center  
in any of the following ways:  
By Telephone  
(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):  
1-800-633-1468  
By e-mail  
For IN-WARRANTY service, complete the following steps:  
(typically we respond to your e-mail within three business days):  
• Obtain a Repair Authorization Number from the Humminbird®  
Customer Resource Center.  
For direct shipping, our address is:  
• Tag product with your name, street address, phone number and  
your assigned Repair Authorization Number.  
Humminbird  
• Include a brief written description of the problem.  
Service Department  
678 Humminbird Lane  
Eufaula, AL 36027 USA  
• Include a copy of your receipt (to show proof and date of purchase).  
• Return product freight prepaid to Humminbird®, using an insured  
carrier with delivery confirmation.  
WARNING! Do not touch an active transducer during operation, as this  
may cause physical discomfort and may result in personal injury in the  
form of tissue damage. Handle the transducer only when the power to  
the control head is off.  
For OUT-OF-WARRANTY service, complete the following steps:  
• Obtain a Repair Authorization Number from the Humminbird®  
Customer Resource Center.  
WARNING! This device should not be used as a navigational aid to  
prevent collision, grounding, boat damage, or personal injury. When the  
boat is moving, water depth may change too quickly to allow time for you  
to react. Always operate the boat at very slow speeds if you suspect  
shallow water or submerged objects.  
• Include payment in the form of credit card number and expiration  
date, money order or personal check. Please do not send cash.  
• Tag product with your name, street address, phone number and  
your assigned Repair Authorization Number.  
WARNING! Disassembly and repair of this electronic unit should  
only be performed by authorized service personnel. Any modification  
of the serial number or attempt to repair the original equipment or  
accessories by unauthorized individuals will void the warranty.  
Handling and/or opening this unit may result in exposure to lead, in  
the form of solder.  
• Include a brief written description of the problem.  
• Return product freight prepaid to Humminbird®, using an insured  
carrier with delivery confirmation.  
WARNING! This product contains lead, a chemical known to the  
state of California to cause cancer, birth defects and other  
reproductive harm.  
© 2008 Humminbird®, Eufaula AL, USA.  
All rights reserved.  
 

Grizzly Automobile Parts G2536 User Manual
Grizzly Chipper G0595 User Manual
Haier Refrigerator RRTW User Manual
Hamilton Beach Computer Monitor 840132700 User Manual
Heath Zenith Universal Remote UT 6028 BZ User Manual
Honeywell Fan HZ 2016 User Manual
HP Hewlett Packard Recording Equipment 8360 User Manual
HTC Cell Phone LIBR160 User Manual
Husqvarna Saw PA 1100 User Manual
IBM Computer Hardware SBC 658 User Manual