Harbor Freight Tools Work Light 66691 User Manual

1 Million Candle-Power  
reChargeable sPot light  
66691  
oPerating and MaintenanCe instruCtions  
Visit our website at: http://www.harborfreight.com  
read this material before using this product.  
Failure to do so can result in serious injury.  
saVe this Manual.  
©
®
Copyright 2009 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork  
contained herein may be reproduced in any shape or form without the express written consent of  
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing  
improvements, actual product may differ slightly from the product described herein. Tools required for  
assembly and service may not be included.  
For technical questions or replacement parts, please call 1-800-444-3353.  
Manual Revised 10d  
 
goes out, the Spot Light is ready for  
use. Unplug the Adaptor.  
sPeCiFiCations  
4V DC 2AH Sealed  
Rechargeable Battery Lead Acid (Included, Not  
Replaceable).  
Charging with 12V Cigarette lighter  
adaptor: Plug into any 12V DC outlet in a  
Automobile, boat or RV, and then into the  
Adaptor Plug Inlet located on the back of  
the Spot Light. See Figure 1.  
25W Halogen (H3 4V  
25W)  
Bulb  
Input: 120VAC 60 Hz  
AC/DC Adaptor  
(Included)  
Adaptor Prongs  
2-Prong, Non-Polorized  
Figure 1  
Cigarette Lighter  
Adaptor  
12V DC, Fuse: 2A 250V  
(Included)  
adaptor Plug inlet  
Light Output  
1 Million Candle Power  
Please Note: Spotlight will NOT operate  
during charging.  
unP aCking  
Pistol  
grip  
When unpaing, make sure that the  
item is intact and undamaged. If any parts  
are missing or broken, please call Harbor  
Freight Tools at the number shown on the  
cover of this manual as soon as possible.  
Charge light  
indicator  
4. The Charge Light Indicator will light  
up. When the Charge Light Indicator  
goes out, the Spot Light is ready for  
use. Unplug the Adaptor.  
oPerating instruCtions  
read the entire iMPortant  
saFety inForMation section  
at the beginning of this manual  
including all text under  
subheadings therein before set  
up or use of this product.  
5. A fully charged Spot Light will give  
bright light for approximately 20 min-  
utes.  
6. note: spotlight will not operate  
during charging.  
Charging with aC/dC adaptor:  
1. Plug AC/DC Adaptor (21) into a 120V  
outlet.  
using the rechargeable spot light:  
1. Hold the Spot Light using the Pistol  
Grip (4).  
2. Attach the end of the Adaptor cord to  
the Adaptor Cord Inlet, located on the  
back of the Spot Light. See Figure 1.  
2. Squeeze the Switch (6) located on  
the Trigger (8). If you want the Spot  
Light to stay on, push the Switch  
3. The Charge Light Indicator will light  
up. When the Charge Light Indicator  
Lock (5) in while squeezing the Trig-  
Rev 10d  
SKU 66691  
For technical questions, please call 1-800-444-3353.  
Page 3  
 
ger (8), then release the Trigger (8)  
and the Spot Light will stay on.  
removing and recycling the 4V dC  
battery:  
3. When finished using the Spot Light,  
squeeze the Trigger to turn the Spot  
Light off. Let the Bulb (14) cool for  
at least 30 minutes before storing.  
Keep Spotlight indoors away from  
children.  
note: the battery for this product is  
rechargeable and long lasting.  
When finally it is worn beyond any  
further use, it should be removed  
and recycled and the spot light  
should be disposed of with normal  
refuse. DO NOT dispose of the  
Spot Light with Battery inclosed in  
it’s Housing.  
replacing the 4V halogen bulb:  
1. Remove the Ring Cover (12) from the  
Housing (2) by un-threading with a  
counterclockwise motion.  
Figure 2  
2. Lift out Ring (11), Lens (10), and  
Reflective Bowl (9). The Bulb (14) is  
installed into base of Reflective Bowl.  
3. Remove the Metal Spring Clip (22)  
holding the Bulb Holder in place by  
squeezing and lifting the Spring Clip  
up through the “T” slot.  
4. note: to prevent hand-oil contam-  
ination, do not touch the halogen  
bulb (14) with bare hands. use a  
lint free, soft, clean rag to handle  
the bulb. Remove the Bulb from the  
Bulb Holder by twisting it counter-  
clockwise and lifting.  
seven screws  
hold housing  
together  
1. To remove the Battery from the Hous-  
ing (2), follow these steps:  
5. Replace with new, identical Bulb  
(25W Halogen H3 4V).  
a. Remove seven Screws from the  
Housing. See Figure 2.  
b. Pull the Housing (2) apart and re-  
move the wires connected to the  
Battery.  
6. Place Bulb Holder into the Reflective  
Bowl (9). Slide the closed end of the  
Metal Spring Clip (22) over the tab at-  
tached to the side of the Bulb Holder,  
and squeeze the Spring Clip together  
while sliding it into the “T” slot.  
c. Remove the Battery from the Hous-  
ing (2).  
warning! do not dispose of the  
4V lead acid battery with normal  
refuse. always recycle in ac-  
cordance with all local, state and  
federal rules and regulations.  
7. Replace the Reflective Bowl (9), the  
Lens (10), and the Ring (11). Hold  
these in place while threading the  
Ring Cover (12) onto the Spot Light  
with a clockwise motion.  
SKU 66691  
For technical questions, please call 1-800-444-3353.  
Page 4  
 
Parts list  
Parts list  
Part  
description  
Q’ty  
Part  
description  
Q’ty  
1
2
3
4
5
6
7
8
9
Circuit Board  
Housing  
1
1
1
1
1
1
1
1
1
1
1
12 Ring Cover  
1
2
1
7
1
2
1
1
1
1
1
13 Screw  
Pistol Grip Holder  
Pistol Grip  
Switch Lock  
Switch  
Trigger Spring  
Trigger  
Reflective Bowl  
14 Halogen Bulb (25W H3 4V)  
15 Screw (Housing)  
16 Battery  
17 Screw  
18 Circuit Board  
19 Wrist Wrap  
20 Auto, Boat, RV, 12V DC Adaptor  
21 AC/DC Adaptor (120V)  
22 Metal Spring Clip  
10 Lense  
11 Ring  
asseMbly diagraM  
22  
record Products serial number here:  
note: If product has no serial number, record month and year of purchase instead.  
note: Some parts are listed and shown for illustration purposes only, and are not available  
individually as replacement parts.  
SKU 66691  
For technical questions, please call 1-800-444-3353.  
Page 5  
 
liMited 90 day warranty  
Harbor Freight Tools Co. makes every effort to assure that its products meet high  
quality and durability standards, and warrants to the original purchaser that this product  
is free from defects in materials and workmanship for the period of 90 days from the date  
of purchase. This warranty does not apply to damage due directly or indirectly, to misuse,  
abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity,  
improper installation, normal wear and tear, or to lack of maintenance. We shall in no event  
be liable for death, injuries to persons or property, or for incidental, contingent, special  
or consequential damages arising from the use of our product. Some states do not allow  
the exclusion or limitation of incidental or consequential damages, so the above limitation  
of exclusion may not apply to you. THIS WARRANTy IS exPReSSLy IN LIeU OF ALL  
OTHeR WARRANTIeS, exPReSS OR IMPLIeD, INCLUDING THe WARRANTIeS OF  
MeRCHANTABILITy AND FITNeSS.  
To take advantage of this warranty, the product or part must be returned to us with  
transportation charges prepaid. Proof of purchase date and an explanation of the complaint  
must accompany the merchandise. If our inspection verifies the defect, we will either  
repair or replace the product at our election or we may elect to refund the purchase price  
if we cannot readily and quickly provide you with a replacement. We will return repaired  
products at our expense, but if we determine there is no defect, or that the defect resulted  
from causes not within the scope of our warranty, then you must bear the cost of returning  
the product.  
This warranty gives you specific legal rights and you may also have other rights which  
vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
Please read the Following CareFully  
THe MANUFACTUReR AND/OR DISTRIBUTOR HAS PROVIDeD THe PARTS LIST AND ASSeMBLy  
DIAGRAM IN THIS MANUAL AS A ReFeReNCe TOOL ONLy. NeITHeR THe MANUFACTUReR OR  
DISTRIBUTOR MAKeS ANy RePReSeNTATION OR WARRANTy OF ANy KIND TO THe BUyeR THAT  
He OR SHe IS qUALIFIeD TO MAKe ANy RePAIRS TO THe PRODUCT, OR THAT He OR SHe IS  
qUALIFIeD TO RePLACe ANy PARTS OF THe PRODUCT. IN FACT, THe MANUFACTUReR AND/OR  
DISTRIBUTOR exPReSSLy STATeS THAT ALL RePAIRS AND PARTS RePLACeMeNTS SHOULD Be  
UNDeRTAKeN By CeRTIFIeDAND LICeNSeD TeCHNICIANS, AND NOT By THe BUyeR. THe BUyeR  
ASSUMeS ALL RISK AND LIABILITy ARISING OUT OF HIS OR HeR RePAIRS TO THe ORIGINAL  
PRODUCT OR RePLACeMeNT PARTS THeReTO, OR ARISING OUT OF HIS OR HeR INSTALLATION  
OF RePLACeMeNT PARTS THeReTO.  
SKU 66691  
For technical questions, please call 1-800-444-3353.  
Page 6  
 

Grandstream Networks IP Phone GXP2120 User Manual
Grizzly Sander G1531 User Manual
Hamilton Beach Coffeemaker 47535C User Manual
Hasbro Robotics Swoop User Manual
Heat Glo LifeStyle Indoor Fireplace ST 42TVFL IPI User Manual
Heath Zenith Door 6153 62 71 72 User Manual
Honeywell Smoke Alarm 5820XL User Manual
Hoshizaki Ice Maker KM 1400SWH 3 M User Manual
Hotpoint Oven SE481012GX User Manual
Hotpoint Range RB787WC BC User Manual