Harbor Freight Tools Kitchen Utensil 92390 User Manual

MEAT MIXER  
4.2 GALLON  
Model 92390  
ASSEMBLY AND OPERATING INSTRUCTIONS  
®
3491 Mission Oaks Blvd., Camarillo, CA 93011  
TO PREVENT SERIOUS INJURY,  
READ AND UNDERSTAND ALL WARNINGS  
AND INSTRUCTIONS BEFORE USE.  
Copyright©2004 by Harbor Freight Tools®. All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
For technical questions or replacement parts, please call 1-800-444-3353.  
 
2.  
1.  
Keep bystanders, children, and visitors away while operating this product.  
Distractions can cause accidents.  
PERSONAL SAFETY  
Stay alert. Watch what you are doing, and use common sense when oper-  
ating kitchen appliances. Do not use kitchen appliances while tired or  
under the influence of drugs, alcohol, or medication. A moment of inatten-  
tion while operating kitchen appliances may result in serious personal injury.  
2.  
3.  
4.  
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.  
Keep your hair, clothing, and gloves away from moving parts. Loose  
clothes, jewelry, or long hair can be caught in moving parts.  
Do not overreach. Keep proper footing and balance at all times. Proper  
footing and balance enables better control of the appliance in unexpected situa-  
tions.  
Use safety equipment. Always wear ANSI approved safety impact glasses.  
Non-skid safety shoes or heavy duty gloves must be used for appropriate condi-  
tions.  
APPLIANCE USE AND CARE  
1.  
Do not force the kitchen appliance. Use the correct appliance for your  
application. The correct appliance will do the job better and safer at the rate for  
which it is designed.  
2.  
3.  
Store idle kitchen appliances out of reach of children and other untrained  
persons. Kitchen appliances are dangerous in the hands of untrained users.  
Maintain kitchen appliances with care. Properly maintained appliances are  
less likely to malfunction and are easier to control. Do not use a damaged  
kitchen appliance. Tag damaged appliances “Do not use” until repaired.  
4.  
Check for misalignment or binding of moving parts, breakage of parts, and  
any other condition that may affect the kitchen appliance’s operation. If  
damaged, have the appliance serviced before using. Many accidents are  
caused by poorly maintained kitchen appliances.  
5.  
Use only accessories that are recommended by the manufacturer for your  
model. Accessories that may be suitable for one kitchen appliance may become  
hazardous when used on another appliance.  
SKU 92390  
For technical questions, please call 1-800-444-3353  
PAGE 3  
 
SERVICE  
1.  
2.  
Appliance service must be performed only by qualified repair personnel.  
Service or maintenance performed by unqualified personnel could result in a risk  
of injury.  
When servicing a kitchen appliance, use only identical replacement parts.  
Follow instructions in the “Inspection, Maintenance, And Cleaning” sec  
tion of this manual. Use of unauthorized parts or failure to follow maintenance  
instructions may create a risk of personal injury.  
SPECIFIC SAFETY RULES  
1.  
2.  
Maintain a safe working environment. Keep the work area well lit. Make sure  
there is adequate surrounding workspace. Always keep the work area free of  
obstructions, grease, cooking oil, trash, and other debris. Do not use the Meat  
Mixer in areas near flammable chemicals, dusts, and vapors.  
Maintain labels and nameplates on this product. These carry important infor-  
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.  
3.  
4.  
5.  
When not in use, keep the Meat Mixer dry and clean.  
Never use the Meat Mixer if it appears damaged.  
WARNING! To avoid health hazards: Before assembling and using, and  
after using this product, immerse all parts of the Meat Mixer in warm, clean water  
and thoroughly wash with an anti-bacterial detergent. Always wash hands thor-  
oughly with warm, clean water and anti-bacterial soap before and after working  
with meat and poultry products. Failure to follow these precautions may  
result in serious illness due to food poisoning.  
6.  
7.  
WARNING! To avoid serious injury to fingers and hands: Always keep  
the clear Plastic Cover (6) firmly in place on the Meat Mixer prior to turning the  
Handle (2). While mixing, insert food products only through the slot in the clear  
Plastic Cover.  
WARNING! The warnings, precautions, and instructions discussed in this  
manual cannot cover all possible conditions and situations that may occur. The  
operator must understand that common sense and caution are factors which  
cannot be built into this product, but must be supplied by the operator.  
SAVE THESE INSTRUCTIONS  
SKU 92390  
For technical questions, please call 1-800-444-3353  
PAGE 4  
 
ASSEMBLY INSTRUCTIONS  
1.  
2.  
3.  
WARNING! To avoid health hazards: Before assembling and using, and  
after using this product, immerse all parts of the Meat Mixer in warm, clean water  
and thoroughly wash with an anti-bacterial detergent.  
Make sure to place the Tank (11) of the Meat Mixer on a dry, flat, level, sturdy  
table/counter surface capable of supporting the weight of the Meat Mixer, food  
products, and any other utensils and equipment.  
To assemble, insert the Spring (9) onto the Bolt (8). Then, from within the Tank  
(11), insert the threaded portion of the Bolt outward through the Right Side  
Mounting Hole. While compressing the Spring, screw the Small Knob (3) onto  
the Bolt. (See Figure A.)  
4.  
5.  
Lower the Mixer Blade (7) into the Tank (11), and insert the end of the Mixer  
Blade onto the Bolt (8). Be careful when handling sharp blades. Then, align the  
open end of the Mixer Blade with the Left Side Mounting Hole. (See Figure A.)  
Insert the top portion of the Handle (2) through the Left Side Mounting Hole and  
into the open end of the Mixer Blade (7). (See Figure A.)  
PLASTIC COVER (6)  
MIXER BLADE (7)  
HANDLE (2)  
SPRING (9)  
LARGE KNOB (10)  
SMALL KNOB (3)  
BOLT (8)  
RIGHT SIDE  
MOUNTING HOLE  
LEFT SIDE  
MOUNTING HOLE  
TANK (11)  
FIGURE A  
SKU 92390  
For technical questions, please call 1-800-444-3353  
PAGE 5  
 
6.  
Insert the threaded portion of the Large Knob (10) through the top portion of the  
Handle (2) and into the open end of the Mixer Blade (7). Then, screw the Large  
Knob into the open end of the Mixer Blade to secure the Mixer Blade in place.  
(See Figure A.)  
OPERATING INSTRUCTIONS  
1.  
2.  
3.  
4.  
NOTE: When mixing ground or minced meat, make sure to remove all bones  
prior to mixing.  
Place the Plastic Cover (6) securely on top of the Tank (11). Do not remove the  
Plastic Cover throughout the mixing process. (See Figure A.)  
While turning the Handle (2) clockwise, drop a handful of meat through the slot in  
the Plastic Cover (6).  
Continue turning the Handle while dropping meat through the slot in the Plastic  
Cover until you are finished. IMPORTANT: Allow the Mixer Blade (7) to mix  
slowly. (See Figure A.)  
5.  
1.  
When finished, remove the Plastic Cover (6). Then, remove the meat.  
(See Figure A.)  
INSPECTION, MAINTENANCE, AND CLEANING  
Before each use: Inspect the general condition of the Meat Mixer. Check for  
misalignment or binding of moving parts, cracked or broken parts, and any other  
condition that may affect its safe operation. If a problem occurs, have the prob-  
lem corrected before further use. Do not use damaged kitchen appliances.  
2.  
3.  
To clean: Before using, and after using this product, immerse all parts of the  
Meat Mixer in warm, clean water and thoroughly wash with an anti-bacterial  
detergent.  
When storing, make sure to store the Meat Mixer in a clean, dry, safe location  
out of the reach of children.  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS  
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTA-  
TION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE  
PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFAC-  
TURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE  
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK  
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,  
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.  
SKU 92390  
For technical questions, please call 1-800-444-3353  
PAGE 6  
 
PARTS LIST  
Part #  
1
Description  
Foot  
Handle  
Small Knob  
Cover Bolt  
Cover Knob  
Plastic Cover  
Qty.  
Part #  
7
8
9
10  
11  
Description  
Mixer Blade  
Bolt  
Spring  
Large Knob  
Tank  
Qty.  
1
1
1
1
1
4
1
1
1
1
1
2
3
4
5
6
ASSEMBLY DIAGRAM  
5
6
4
7
10  
9
3
8
2
11  
1
NOTE:  
Some parts are listed and shown for illustration purposes only,  
and are not available individually as replacement part.  
SKU 92390  
For technical questions, please call 1-800-444-3353  
PAGE 7  
 

Graco Baby Accessories 1760706 User Manual
Graco Baby Carrier ISPC094CB User Manual
Haier Washer HLP021 WM User Manual
Haier Water Heater QBJ1 130A58E User Manual
Hamilton Watch Watch Khaki Automatic Frogman User Manual
Harbor Freight Tools Air Compressor 92699 User Manual
Harbor Freight Tools Automobile Accessories 34313 User Manual
Honeywell TV Cables 7845gsmr User Manual
Icom Marine Radio IC M72 User Manual
iHome Portable Stereo System IP49 User Manual