Haier Washer WNM1000TE User Manual

Automatic Drum  
Washing Machine  
WNM1000TE  
WNM800TE  
Table of Contents  
Before using  
Names of Parts---------------------------------inside front cover  
Matters Needing Attention-------------------------------------1-3  
Installation---------------------------------------------------------4-5  
Control Panel--------------------------------------------------------6  
Operational Functions-----------------------------------------6-7  
During using  
Program Selection-------------------------------------------------8  
Preparation----------------------------------------------------------9  
Washing Methods--------------------------------------------10-11  
Other Function----------------------------------------------------12  
Maintenance  
Maintenance ------------------------------------------------------13  
Trouble Shooting-------------------------------------------------14  
Wiring Circuit------------------------------------------------------15  
Technical Specification------------------------------------------16  
 
Matters Needing Attention  
ƽ
Safety  
2. Hold the plug and not the electric cable  
when unplugging the washing machine.  
1. A separate earthed socket is required  
for the power supply. After installation of  
the washing machine,the power plug  
should be accessible during the normal  
wash.  
3. Fuses in the power circuit should be rated  
for 15A. Refer to a washing machine techni-  
cian or a Haier designated service point for  
power cable replacement.  
4. For your safety, dry hands before touch-  
ing the washing machine and wear appropri-  
ate footwear .  
5. Do not use flammable detergent or dry  
cleaning agent; do not use flammable  
spray in close vicinity to the washing  
machine; do not remove or insert the plug  
in the presence of flammable gas.  
6. The door of the washing machine will be-  
come hot during the water heating process.  
Avoid contact with the door during the heat-  
ing process. For safety, keep children away  
from the washing machine.  
7. Do not allow children play with the packing materials after unpacking.  
1
 
Matters Needing Attention  
ƽ
Use  
2
 
Matters Needing Attention  
4. Do not wash foam rubber or similar sponge  
materials.  
3. Never place heavy objects ,a heating  
applianceor a water container on the top panel  
of the washing machine.  
5. Before washing, do up zippers, buttons ,  
laces and repair damaged areas,under-  
wear or small articals should be placed  
in the laundry bag or a pillowslip.  
6. Do not open the detergent box during  
the wash cycle.  
Do not wash clothes containing wire  
frames.  
8. After washing, turn off the tap to prevent  
leakage; unplug the washing machine  
and wipe clean the lower part of the port  
hole.  
7. The door is fitted with a self-lock device and  
will not open until 2~3 minutes after the wash-  
ing machine stops. Do not force the door  
open. Do not open the door when water level  
reaches the port hole.  
9. Keep the door slightly open when the washing machine is not being used. Never cover the  
machine with a plastic sheet.  
3
 
Installation  
As shown in figure1 remove all the packing materials  
ƽ
(including the foam base).  
Upon opening of the package, water drops may be seen on  
the plastic bag and the porthole. This in normal phenomenon  
resultingfrom water test in the factory.  
Fig 1  
ƽ
Check attachments and materials.  
Name  
Operational  
manual  
Quality  
Water  
hose  
Drainage  
holder  
Plastic  
plugs  
Qty  
certificate  
Model  
WNM1000TE  
WNM800TE  
1
1
1
1
3
Remove the packing screws as shown in figure 2.  
ƽ
The packing bolts protect the appliance from shock during trans-  
portation The steps below should be followed before using the  
appliance,  
1. Remove the rear panel of the washing machine;  
2. Remove the three packing bolts from the rear panel of the wash-  
ing machine,the rubber hose and then the shock absorption chan-  
nel steel;  
3. Reinstall the back plate;  
4. Fill the holes left by the packing bolts with plastic plugs.  
(Attention: the packing bolts and rubber hose should be kept in a  
safe place for later use)  
Fig 2  
Adjusting the position of the washing machine .There are ad-  
ƽ
justable feet under the bottom of the washing machine. Before use,  
the washing machine should be adjusted, as shown in figure 3, so  
that it is level.  
Fig 3  
4
 
Installation  
Connection of water inlet hose and washing machine  
.
Water drainage hose  
The height of the terminal of the water drainage  
hose should be between 80cm-100cm, the water  
drainage hose must be securely placed on the clip  
on the back of the washing machine.  
Use the water drainage support supplied as an  
accessory for proper installation of the water drain-  
age hose .fix the water drainage hose support with  
waterproof sring.Do not use an excessively long wa-  
ter drainage hose and contract the authorized tech-  
nician if the water drainage hose needs to be  
extended.the water drainage hose should not be ex-  
tended more than250cm.(longer extension will result  
in concurrent water inflow and outflow).The diam-  
eter of the extension hose should be the same as  
the original hose.  
caution:water drainage hose must not be immersed  
in water.the original and extension hoses should be  
tightly connected .  
Connection of power supply  
Check the following items before connection to the power supply.  
The socket conforms to the maximun power load(The maximum current load of the socket and  
power supply cable should not be less than 15A).  
Power supply voltage conforms to the required value.  
The power supply socket and the plug of the washing machine compatible,if they are compat-  
ible ,Refer to a washing machine technician or a Haier designated service point for power cable  
replacement.The washing machine should be connected to an earth before use.  
Supplementary earth cable should not be necessary if the socket is connected to the earth.  
Supplementary earth cable should be installed on the upper back of the washing machine  
andconnected to an earth if the power supply socket has no earth connection.  
5
 
Control Panel  
90  
30  
50  
80  
40  
70  
60  
1/2  
0
15  
1
14  
2
13  
12  
11  
3
Turn the knob at "0", then turn off the power and  
4
5
turn the program knob for setting desired wash program.  
6
10  
7
9
The program knob will not rotate with the programmed washing  
process.  
8
90  
30  
50  
80  
40  
70  
60  
6
 
Operational Functions  
No Soak Button  
For the synthetics cycle and the wool cycle, push the  
button down, the anticrease funtion will be skiped and  
automatically enter into the next step;Press the  
button, the anti-crease funtion will work again.  
Economic Wash button  
It reduces water and power consumption when  
1/2  
rinsing if the machine does not have a full load.  
Note: Select this function when "Cotton" "Synthetics", "Wool" or "Silk"  
(programs 1-12) is selected.  
7
 
Program Selection  
HD600TXE/HD600SWE/HD600GE  
Program Setting  
Laundry  
Temperature  
-30-40-50-60  
*
1
2
Intense  
Very heavy soil  
-70-80-90  
-30-40-50-60  
Heavy soil  
Prewash  
*
-30-40-50-60  
3
4
5
6
7
8
Normal  
Middle  
Soiled cotton  
*
Non-fade and medium  
soiled cotton  
Fading and medium  
soiled cotton  
-30-40  
*
Delicate  
Normal  
Middle  
*
Non-fade heavily  
-30-40-50-60  
soiled chemical fiber  
Non-fade and medium  
soiled chemical fiber  
Fading and medium  
soiled chemical fiber  
*
-30-40  
*
Delicate  
*
Non-fade heavily soiled  
woolen fabrics  
Fading and medium  
soiled woolen fabrics  
Non-fade heavily soiled  
silk fabrics  
9
-30-40  
Normal  
*
10 Delicate  
11 Normal  
12 Delicate  
*
-30  
*
Fading and medium  
soiled silk fabrics  
*
13  
14  
15  
Quick  
Rinse  
Spin  
-30  
Medium-soiled lanudry  
*
*
*
Turn the program knob at "0" position and turn off the power. The wash  
program ends and the washing machine stops operation.  
0
End  
NOTE: " " means softener liquid detergent canbe added when necessary.  
" " means detergent can be added when necessary.  
" " means no detergent can be added.  
8
 
Preparation  
2. Water supply  
1. Power supply  
Plug in the power supply  
220V~240V/50Hz.  
Turn on the tap ensure that the water is clear.  
Caution: Before staring the washing machine turn on the  
water faucrt to ensure that the water faucet and the water  
inlet hose are connected correctly and do not leak.  
3. Laundry treament  
4. Detergent selection  
Only special low foam detergent  
should be used in automatic  
drum washing machine, form  
blended or wool fabrics special  
detergent should be used. dry  
cleaning solvent should not be  
used such as trichhloroethylene  
or alike (caution :load the re-  
quired amount of detergent only).  
sort out clothes according to type and extent of dirt.  
ƽ
There are three types of clothes: cotton, synthetical and  
woolen (silk) fabrics.  
separate white clothes from colored. If whites and  
ƽ
coloreds are combined for one load, make sure the  
coloreds are colorfast.  
-Remove all objects from pockets that may cause dam-  
age to the machine, such as keys and coins.  
-Clothing with frayed edges or yarns should be put in a  
wash bag or special bag before washing.  
-Repaire damaged clothing,lose buttons or damaged zips  
and hooks before washing.  
-Bed sheets and table ware should be loosely loaded and  
not folded.  
This washing machine is for household use and de-  
ƽ
signed for mechanically washable clothes. When washing,  
separate unwashable clothes with reference to clothes  
labels.  
5.Wash Load  
Woolen fabrics  
1kg  
Blending fabrics  
2.5kg  
Type  
Delicate fabrics  
Non-fade cottons  
Max load  
5kg  
2kg  
 
Washing Methods  
1. Laundry loading  
Reference loading  
Evenly load the laundry in the  
Overalls  
(cotton 950g)  
ƽ
ƽ
Jeans (800g)  
washing machine and then tightly  
close the door of the washing  
machine  
ƽ
Pajamas (200g)  
ƽ
Blended  
Note: 1) When first using the  
washing machine, let it run un-  
loaded for one program to pre-  
vent the laundry from being  
tainted by oil or dirty water from  
the washing machine. 2) Do not  
overload the washing machine.  
fabric clothes  
(800g)  
ƽ
Shirts  
(300g)  
shirt  
ƽ
ƽ
Underwear  
(cotton  
300g)  
(blended fabrics 70g)  
ƽ
Socks  
(blended fabrics 50g)  
ƽJackets  
(cotton 800g)  
ƽSingle bed  
sheets  
(cotton 800g)  
ƽ
Woolen blankets  
(3000g)  
2. Use of detergent  
Pull out the detergent drawer, put required detergent, soften-  
ing agent and bleaching agent into the corresponding boxes.  
Push back the drawer gently.  
Caution: 1) Do not add liquid detergent into box 1 and 2  
2) For pre-washing program, detergent should  
be added to both box 1 and 2; for other  
programs, do not add detergent to box 1  
3) Do not overuse softening agent as this may  
damage artificial fabrics.  
3. Washing program setting  
Set the wash program correctly in accordance with the laundry load. The methods for  
setting wash programs are indicated on the handle of the distributor on the washing  
machine. Turn the program knob to the desired program.  
Caution: If you want to choose another program, first turn the program knob at "0", then  
turn off the power and turn the program knob for setting desired program.  
10  
 
Washing Methods  
4. Washing temperature Setting  
Set the washing temperature as required, otherwise, set at position * when heating is not  
needed.  
5. Selecting the function button  
Select function buttons as required (refer to the directions printed on the control panel) ,  
otherwise keep all the button released.  
6. Washing  
Press the power button and the washing machine will automatically commence the pro-  
grammed washing process.  
Caution: The program knob will not rotate with the programmed washing process.  
7. End  
Wait 2-3 minutes after the washing process is finished , press the power button again to cut  
off the power supply. Open the door to take out the laundry. Turn off the tap and unplug the  
washing machine.  
Caution: When the washing program finishes, the door lock light will glitter before the door can  
be opened.  
Additional information  
Energy and water saving during wash process  
1. Collect clothes for one full wash load.  
2. Do not overload the washing machine.  
3. Prewash heavily soiled clothes.  
4. Reduce the amount of detergent or choose fast or minimal washing programs for lightly  
soiled clothes dirty.  
5. Choose a proper washing temperature. Only exceed 60 OC for heavily soiled clothes.  
6. Do not use more detergent than required.  
7. Softening agent makes clothes feel softer and easier to iron.  
11  
 
Other Functions  
1. Power-off memory funtion:  
This machine has a power-off menmory funtion. In case of abrupt power failure  
or the power must be cut off during a program cycle, the present settings will be  
saved, and operation will resume when the power is switched on again.  
2. Trouble messages: judge the malfunctions from door lock light  
Error 1: The door lock light does not illuminate.  
Cause: Door is not properly shut.  
Correction: Shut the door properly.  
Error 2: The door lock light glitters 2 times and stops 4 seconds repeatedly.  
Cause: Drainage error, water not emptied within 4 minutes.  
Correction: Clean the filter and check the drain hose for blockage. If error still  
exists, please contact the maintenance personnel.  
Error 3: The door lock light glitters 3 times and stops 4 seconds repeatedly.  
Cause: Temperature sensor not properly connected or damaged.  
Correction: Contact the maintenance personnel.  
Error 4: The door lock light glitters 4 times and stops 4 seconds repeatedly.  
Cause: Heating coil damage or overload of laundry that leads to a failure to  
reach the set temperature within the specified time (This message is display  
at the end of a program).  
Correction: Reduce load and then start washing again or contact the  
maintenance personnel.  
Error 5: The door lock light glitters 5 times and stops 4 seconds repeatedly.  
Cause: Water level not met in 8 minutes.  
Correction: Make sure that tap is turned on, and water pressure is normal.  
If problem still exists, please contact the maintenance personnel.  
Error 6: The door lock light glitters 6 times and stops 4 seconds repeatedly.  
Cause: Timing control silicon damage.  
Correction: Contact the maintenance personnel.  
Error 7: The door lock light glitters 7 times and stops 4 seconds repeatedly.  
Cause: Motor overheat protection or damage.  
Correction: Contact the maintenance personnel.  
Error 8: The door lock light glitters 8 times and stops 4 seconds repeatedly.  
Cause: Water exceeds protective level.  
Correction: Contact the maintenance personnel.  
12  
 
Maintenance  
2. Unplug the machine during cleaning and  
maintenance. Use a soft cloth dampened  
with soapy liquid to clean the machine case  
and rubber components. Do not use corro-  
sive or abrasive chemicals or solvents.  
1. Turn of the water and electricity supply af-  
ter every wash. Open the door to prevent the  
formation of moisture and odors. If the wash-  
ing machine is left idle for a long period, drain  
any remaining water in the machine and re-  
place the drainage hose.  
4. To prevent blockages to the water  
supply or the ingress of contaminants,  
clean the water inlet and inlet water  
filter regularly.  
4.  
5. If the machine is to be moved a distance location,  
replace the vibration mounting locks which were re-  
moved during installation as shown below.  
6. If the washing machine is left  
idle for a long period turn off the  
water and electricity supply and  
open the door slightly to prevent  
the formation of moisture and  
odors.  
Replace the rubber Insert the bolts.  
plugs.  
Remove the back  
cover.  
Replace the back  
cover.  
Tighten the bolts with a  
spanner.  
13  
 
Trouble shooting  
The following circumstances do not constitute problems. Do not contact the  
maintenance service until the problem has been confirmed.  
Problem  
Possible Cause  
ƽ
ƽ
ƽ
ƽ
Poor connection to power supply  
Power failure  
Door is not properly closed  
Machine has not been switched on  
The washing machine fails to  
operate  
ƽ
ƽ
ƽ
ƽ
ƽ
ƽ
Water is not turned on  
Water pressure is less than 0.03MPa  
The inlet hose is kinked  
Water supply failure  
The program knob is not properly set  
The door is not properly closed  
Washing machine does not fill  
with water  
The water supply and  
drainage do not stop  
ƽ
Check that the height of the water hose is below  
80cm  
ƽ
ƽ
Drainage hose is blocked  
Drainage hose end is below 100cm above the  
floor level  
Drainage failure  
ƽ
ƽ
Some packing fixing bolts removed  
Washing machine on a uneven surface  
Strong vibration during spin  
Operation stops before comple-  
tion of the wash cycle  
ƽ
Water or electricity failure  
ƽ
The detergent is not a low foam type  
Excessive detergent has been used  
Excessive foam in the drum  
14  
 
Technical Specification  
Model  
Item  
WNM1000TE  
WNM800TE  
220V~240V/50Hz  
220V~240V/50Hz  
Power supply  
Maximum working current  
(A)  
15  
15  
Water pressure  
Washing power  
(MPa)  
(W)  
0.03  
P
1
0.03  
1
230  
230  
Spinning power  
(W)  
400  
380  
Max. washing load  
Spinning speed  
(kg)  
5
5
(r/min)  
1000  
800  
Washing program  
Maximum power  
15  
15  
(W)  
2000  
2000  
Size (HXDXW)  
Weight  
(mm)  
850x520x595  
65  
850x520x595  
65  
(kg)  
 
Wiring Circuit  
Motor  
M8  
M7  
R
T
S
M1  
M2  
M3  
M5  
CN1-2  
CN2-1  
CN1-3  
CN1-1 CN3-3  
CN3-1  
MR  
CN2-2  
CN6-4  
CN6-3  
MRN  
NTC  
MRL  
MRC  
CON3  
PCB  
SW  
N
G
L
CON2  
CON1  
CN2-3  
CN2-4  
EVF  
FA  
EVP  
CN2-6  
CON3  
CN3-3  
CN3-4  
CN2-5  
EVC  
12  
13  
14  
PS  
R
11  
P
PCB-Printed Circuit Board  
MR-Door Lock  
PS-Drain Pump  
EVP,EVF-Cold water Valve  
FA-Interference Suppresser  
SW-Power Switch  
Motor-Motor  
R-Heating Element  
P-Pressure Switch  
EVS-Hot Water Valve  
NTC-Temperature Sensor  
Motor-Motor  
16  
 

Haier Beverage Dispenser HBF05E User Manual
HANNspree Flat Panel Television E2 000G000G User Manual
HANNspree Flat Panel Television HANNSrobby User Manual
Harbor Freight Tools Outboard Motor 45076 User Manual
Heath Zenith Work Light SL 5650 User Manual
Honeywell Marine Radio V4043 User Manual
HP Hewlett Packard Projector L1581A User Manual
Huffy Fitness Equipment M790054 User Manual
IBM Portable Media Storage DS3000 User Manual
IKEA Plumbing Product AA 188632 1 User Manual