Haier Flat Panel Television LET26C430 User Manual

LED LCD TV RECEIVER  
USER MANUAL  
MODEL:  
Please read this manual carefully before using  
your television and keep this manual in a good  
place for future reference.  
LET26C430  
LET32C430  
 
Thanks for buying this 26"/ 32" LED LCD TV. This guide will help you set up and begin using your TV.  
26" Full HD 1080P Digital LED LCD TV  
Remote control  
AAA battery x2  
Instruction Manual  
Quick start guide  
Scart cable x1  
32" HD Ready LED LCD TV  
Remote control  
AAA battery x2  
Instruction Manual  
Quick start guide  
Scart cable x1  
Adaptor  
Adaptor  
P.02  
 
SAF ETY NOTICE  
"
"
"
"
"
"
For your protection,please read these instruction completely and keep this manual for future reference.  
Please ensure that the set has adequate ventilation.  
Do not place the set near a heat source or in direct sunlight.  
Do not put the unit near water or oil as it may cause a fire.  
During thunderstorms, unplug both the antenna and power plug to prevent damage.  
Do not use a damaged power plug or put the power supply near a heat source as it may cause electric shock or  
fire.  
"
"
"
To prevent potential frie, do not overload an electrical outlet with too many plugs.  
Place the set on a level surface to prevent it from tipping and potential damage.  
Do not remove the cover of the set or try to service your TV. This may result in electrical shock or fire. All service  
work must be completed by an authorised technician.  
"
If there are any abnormal sounds or smells from the unit, unplug it immediately and contact an authorised  
service provider.  
"
"
"
To prevent fire, do not use or store any flammable materials near the unit.  
To prevent fire, do not place the unit near a damp wall.  
To prevent electric shock, ensure that any external antenna connected to the set is clear of contact with any  
power lines.  
"
"
"
Do not plug/unplug the unit while your hands are wet. This may cause an electric shock.  
Please ensure a solid connection with the AC wall socket in order to avoid shock and potential fire.  
To prevent electric shock or fire, please prevent rain from entering the set along the wire connected to the outside  
antenna.  
"
"
"
When cleaning, please unplug the unit. Use a soft cotton cloth. Do not use any abrasive cleansers, and prevent  
water from entering the set.  
If any plugs or input wires are dirty, unplug the set and clean them. This will prevent the risk of electric shock or  
fire.  
If the set is not going to be used for an extended period, unplug the unit from the main power.  
The apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should  
be placed on the apparatus.  
The mains plug is used for disconnecting the device, make it easily accessible.  
Do not use any accessories that are not reCommendedby the manufacture.  
P.03  
 
WARNINGS AND CAUTIONS  
Warning  
Caution  
High voltages are used in the operation  
of this television receiver. Do not remove  
the cabinet back from your set. Refer  
servicing to qualified service personnel.  
Do not trap the power supply cord under  
the television receiver.  
Caution  
Never stand on, lean on, or suddenly push  
the television or its stand. You should pay  
special attention to children. Serious injury  
may result if it should fall.  
Warning  
To prevent fire or electrical shock  
hazard, do not expose the television  
receiver to rain or moisture.  
Caution  
Do not place your television on an unstable  
cart, stand, shelf or table. Serious injury to  
an individual , and damage to the  
television, may result if it should fall.  
Warning  
Do not drop or push objects into the  
television cabinet slots or openings.  
Never spill any kind of liquid on the  
television receiver.  
Caution  
When the television receiver is not  
used for an extended period of time, it  
is advisable to disconnect the AC power  
cord from the AC outlet.  
Dim:515*320mm(  
Caution  
Do not block the ventilation holes in the  
back cover. Adequate ventilation is  
essential to prevent failure of electrical  
components.  
Caution  
If the television is to be built into a  
compartment or similar enclosure, the  
minimum distances must be maintained.  
Heat build-up can reduce the service life of  
your television, and can also be dangerous.  
P.04  
 
02 Introduction  
INSTALLATION  
CAUTION  
*Locate the TV in the room where light  
does not strike the screen directly.  
*Total darkness or a reflection on the  
picture screen can cause eyestrain. Soft  
and indirect lighting is recommended for  
comfortable viewing.  
*Allow enough space between the TV and  
the wall to permit ventilation.  
*Avoid excessively warm locations to  
prevent possible damage to the cabinet or  
premature component failure.  
Never tamper with any components inside  
the TV, or any other adjustment controls  
not mentioned in this manual. All LED-TVs  
are high voltage instruments. When you  
clean up dust or water drops on the LED  
PANEL or CABINET, the power cord should  
be pulled out from the receptacle, then  
wipe the TV with a dry soft cloth. During  
thunder and lighting, unplug the power cord  
and antenna cord to prevent damage to  
your TV. All repairs to this TV should only  
be performed by qualified TV service  
personnel.  
*Do not cover the ventilation openings  
when using theTV.  
Main features  
Used as Television, display terminal,  
3
4
5
HDMI interface and SCART Interface;  
PC display;  
NICAM;  
High luminance, wide viewing  
Angle;  
Time shift  
Main parameter  
Panel  
26"  
32"  
PAL-B/GID/K  
SECAM- B/GD/KLL  
TV System  
'
Video Signal System  
Input Power Voltage  
Power consumption  
Audio Output Power THD 7%)  
Signal Input  
PAL/NTSC/SECAM  
100-240V~ 50/60Hz  
55 W  
75 W  
2x8W  
2x5W  
Analog RGB(PC)x1  
PC Audiox1  
High-Definition Multimedia Interface (HDMI)x2  
Video Input x1  
CVBS Input x1  
YPbPrx1  
Mini Scart x 1  
USB x 1  
CI x 1  
Tuner x 1  
CompositeVideoinput >=350  
Horizontal definitionTV line)  
YPbPr  
>=400  
P.05  
 
PC  
PRESET MODE  
V.Freq.(Hz)  
H.Freq.(KHz)  
RESOLUTION  
1
2
3
800*600  
60  
37.88  
640*480  
60  
60  
31.47  
48.36  
1024*768  
4
1360x768  
60  
60  
60  
47.7  
5
6
1280x1024  
63.98  
66.64  
1920x1080  
(Only for 26")  
P.06  
 
STAND INSTALLATION GUIDE  
This STAND INSTALLATION GUIDE is provided to help you easily install the stand. Please carefully  
follow step 1 through Step 2.  
Open the box and find the parts  
1 Open the box and find the following parts.  
Screws  
-
-
Stand x1 pc  
Packing  
Screws x 4 pcs  
Stand  
TV  
Stand  
Packing  
Place the stand on the TV  
1. Insert the stand support pillar into the  
stand as the arrow indicated direction,  
and then fastened with three screws.  
2
2. Insert the stand Ass'y into back cover  
as the arrow indicated direction,  
and then fastened with one screw.  
P.07  
 
WALL MOUNTING INSTALLATION GUIDELINES  
Wall Mounting Holes Spacing and Location  
200.00  
4 Wall mount M4 Screws  
1.Use the screwdriver to remove 1 screws from the screw location.  
2.Remove the base stand from the Main body.  
P.08  
 
Front control panel  
SOURCE  
MENU  
CH+  
CH-  
VOL+  
3
VOL-  
1
2
STANDBY  
SOURCE  
MENU  
CH+/CH-  
Display the input source menu.  
Display main MENU.  
In TV mode,press CH+ or CH- to change  
the channel up and down.  
In MENU, press CH+ or CH- to select items .  
In standby mode, it can Turn on the TV.  
Adjust sound level.  
1
2
3
1
Remote control sensor.  
Indicator LED:  
Blue:POWER ON. RED STAND BY.  
Key board.  
2
3
VOL+/VOL-  
STANDBY  
4
5
In MENU,adjust the item that you Selected.  
Rear/Side Sockets  
AV  
L
R
Y
Pb  
Pr  
HDMI2  
AC-INPUT  
100-240V~ 50/60Hz  
3
1
2
4
5
COMMON INTERFACE (CI)  
SCART  
USB  
HDMI1  
PC AUDIO  
VGA  
ANT  
10  
11  
12  
6
7
8
9
input  
input  
input  
input  
input  
input  
AV  
USB  
PC AUDIO  
COMMON INTERFACE(CI)  
SCART  
input  
1
2
3
4
5
6
7
8
9
10  
L/R AUDIO  
AC Power Source  
YPbPr  
HDMI2  
HDMI1  
input  
Intput  
Intput  
Input  
input  
11 VGA INPUT  
ANT  
12  
P.09  
 
P.10  
 
COMMON INTERFACE  
The common interface (CI) slot is designed to  
accept the conditional Access (CA) Module  
and Smart card in order to view the pay TV  
programmes and additional services.  
Contact your Common Interface service  
provider to get more information about the  
modules and subscription.  
Please noted that CA modules and smart  
cards are neither supplied nor optional  
accessories from us.  
Auto Tuning  
DTV Manual Tuning  
ATV Manual Tuning  
Programme Edit  
Signal Information  
CI Information  
Software Update(OAD)Off  
CHANNEL  
<
>
Software Update(USB)  
P.11  
 
03 Remote control  
1:POWER:To set the TV to standby or power on.  
POWER  
MUTE  
2:NUMERIC KEY:For direct access to channels.  
3:TV MENU:To display TV menu.  
4:CURSOR:To move within the menu.  
5:CH.LIST:To display the channels list.  
6:VOL+/- :To adjust sound level.  
7:PIC:To switch picture mode.  
13  
14  
15  
1
2
AUDIO  
1
4
2
5
8
3
6
9
RECALL  
7
0
8:SLEEP:Set timer to turn off the TV.  
9:FREEZE : To freeze the picture.  
10:EPG:To display information about the  
program being viewed and what's on next in  
DTV mode.  
11:FAV:To access your favourite channels list  
in TV or DTV mode.  
TV MENU  
SOURCE  
16  
17  
3
4
OK  
18  
19  
5
6
12:TELETEXT KEYS: Please refer to next page.  
13:MUTE:To disable or enable the sound output.  
14: AUDIO:To select the available audio  
/language of TV programs .  
CH.LIST  
+
SOUND  
PIC  
EXIT  
+
20  
VOL  
_
CH  
_
15: RECALL: To access the previously viewed  
channel.  
7
8
SLEEP  
ASPECT  
21  
22  
16: SOURCE: To select input source.  
17: OK:To confirm selection.  
FREEZE  
TV/RADIO  
FAV  
TEXT  
INFO  
23  
24  
9
18: EXIT:To return to the previous menu  
or exit menu.  
EPG  
10  
11  
19: SOUND:To switch sound mode.  
20: CH+/CH-:To access the next or previous  
channels.  
REVEAL  
HOLD  
LIST  
MIX  
INDEX  
12  
SUBPAGE  
SIZE  
SUBTITLE  
21: ASPECT: To change picture aspect ratio.  
22:TV/RADIO:In DVB mode, it is used to switch  
between digital TV channels and radio  
stations. Display/remove the programme  
information.  
25  
26  
30  
31  
REC/REP  
27  
28  
32  
33  
23: TEXT:To enter or exit TELETEXT.  
24: INFO:To display information about the  
channel being viewed or further information  
about the program when in small EPG  
screen in DTV mode.  
25: SUBTITLE:To switch between different  
subtitles in DTV mode.  
29  
26. To skip to the next file in USB mode.  
27. To skip to the previous file in USB mode.  
28. REC/REP:Press to record the TV program you  
are watching in DTV Mode or press to repeat play  
in USB Mode.  
29. Stop the media player in USB mode.  
30. To scan in reverse, during USB, USB playback.  
31. To scan in forward, during USB, USB playback.  
32. Play the media player in USB mode.  
33. Pause the media player in USB mode,time shift  
in DTV mode.  
NOTE:  
With no operation for 4 hours, the unit will swift into  
the standby mode automatically.  
P.12  
 
REMOTE CONTROL  
TELETEXT  
Teletext is an information system broadcast by certain channels which can be  
consulted like a newspaper. It also offers access to subtitles for viewers with hearing  
problems or who are not familiar with the transmission language(cable networks,  
satellite channels, etc.)  
Press:  
You will obtain:  
This is used to call or exit teletext modes. The summary appears with  
a list of items that can be accessed. Each item has a corresponding  
3 digit page number. If the channel selected does not broadcast  
teletext, theindication 100 will be displayed and the screen will  
remain blank (in this case, exit teletext and select another channel).  
TEXT  
Enter the number of the page required using the 0 to 9 up/down.  
Example: page 120, enter 120. The number is displayed top left, the  
counter turns and then the page is displayed. Repeat this operation to  
view another page. If the counter continues to search, this means  
that the page is not transmitted. Select another number.  
SELECTING A PAGE  
Coloured are as are displayed at the bottom of the screen. The 4  
coloured keys are used to access the items or corresponding pages.  
The coloured areas flash when the item or the page is not yet  
available.  
DIRECT ACCESS  
TO THE ITEMS  
This returns to the contents page (usually page 100).  
INDEX  
Certain pages contain sub-pages which are automatically  
displayed successively. This key is used to stop or resume sub-  
page acquisition. The indication appears top left.  
SUB PAGE  
HOLD  
To freeze the page.  
To display or hide the concealed information (games solutions).  
REVEAL  
The user can set four favorite pages to be directly linked to the four  
color keys. While list mode is activated, it is not possibility to use TOP  
or FLOF navigation with the colorkeys. The favorite page numbers  
should be stored and restored to/from nonvolatile memory for each  
channel by the system software.  
LIST  
P.13  
 
04 OPERATION  
Installation Guide  
Tune Type  
Germany  
DTV+ATV  
Norway  
Please select an OSD Language  
Italy  
Luxembourg  
Netherlands  
Greece  
Poland  
Cesky  
English  
Magyar  
Polski  
Hrvatski Nederlands Portugues  
ka Italiano Norsk  
Pycck  
Fran ais  
~
Hungary  
Portugal  
Espanol  
Dansk  
Deutsch  
MENU  
E
OK  
Pls press  
to select country at first , then  
press OK button to start auto tuning .  
Mode Select  
Channel Tuning  
Home Mode  
Shop Mode  
TV : 0 Programme(s)  
DTV : 0 Programme(s)  
Radio : 0 Programme(s)  
Data: 0 Programme(s)  
OK  
96% UHF CH 68 DTV  
Country  
NOTE:  
Norway  
Rumania  
Slovenia Switzerland Morocco  
All the channels including ATV, DTV and Radio  
can be tuning by one time,if the Tune Type is  
DTV+ATV .  
All the stored channels will be disappear after  
auto tuning .  
Spain  
Poland  
Russian  
Serbia  
UK  
Tunis  
Portugal  
Algeria  
Sweden NewZealand  
OK  
After auto tuning , the channel will skip to  
the first DTV channel.  
This screen only appear when the TV first time  
turn on or reset to factory set.You can choose  
language,energy-saving mode and country,  
auto tuning programs .And after tuning the  
screen will skip to the first DTV program.  
2).DTV Manual tuning:  
You can select a DTV channel then find the  
program in this channel.  
Pls press  
to select the channel , then press  
1.CHANNEL MENU  
The first item of the MENU is channel menu( for  
TV or DTV source only).  
OK to search the programs .  
NOTE:  
Bad Normal Good means signal intensity.  
DTV Manual Tuning  
_
Auto Tuning  
VHF CH  
5
+
DTV Manual Tuning  
ATV Manual Tuning  
Programme Edit  
Signal Information  
CI Information  
Software Update(OAD)Off  
CHANNEL  
<
>
Software Update(USB)  
Press OK to search  
Nomal  
Bad  
Good  
You can search channels and edit programs here.  
1).Auto tuning:  
3). ATV Manual tuning :  
Search all the channels automatically(you can  
select ATV and DTV)  
You can change the sound system to search  
the analog TV channels and fine tune the  
channels , then storage the channels you  
selected.  
P.14  
 
Once your favorite group is created, you can  
press the FAV key to quickly access your favorite  
channel.  
5). CI information: (optional)  
This menu can display the CI card' s information.  
ATV Manual Tuning  
_
Storage To 1  
System BG  
+
Current CH 1  
Search  
2. PICTURE MENU  
The second item of the MENU is PICTURE MENU.  
You can adjust picture effect here, such as  
contrast, brightness, etc.  
Fine-Tune  
Press OK to move, press OK to adjust.  
Frequency 255.25 MHz  
MENU  
Save  
Picture Mode Standard  
Color Temperature  
Aspect Ratio  
Noise Reduction  
Screen  
NOTE:  
PICTURE  
<
>
Press teletext red button to storage to channels  
after manual tuning .  
4). Program edit:  
Color Temperature  
Medium  
You can Delete ,Rename ,Move, Skip , FAV any  
programs.  
Picture Mode  
Standard  
Contrast 82  
Brightness 50  
Red 40  
Green 31  
Blue 50  
Delete  
Color 50  
Sharpness 50  
Press teletext red button , the program in cursor  
will delete.  
Tint 50  
MENU  
MENU  
Rename:  
NOTE:  
1).Tint is available in NTSC system only.  
2).There are four colors temperature modes  
can be selected medium, warm, cool,user  
3).Screen is available in PC mode only which  
can adjust Horizontal position, vertical  
position, size and phase.  
Only can rename ATV programs .  
Move the cursor to the program, press teletext  
green button to rename the program.  
Press  
to choose the character. Press  
to  
move the cursor .  
Press MENU button to exit edit , Press EXIT to  
exit the menu.  
Note: ATV programs name only can be 5 character,  
DTV programs name can be 25 character.  
3.SOUND MENU  
The third item of the MENU is the SOUND  
MENU.  
You can adjust the sound effect here such as  
treble, bass, balance etc.  
Use the Arrow Buttons to select the channel you  
wish to move. Then press the Yellow Button to  
select Move function. Once active, enter the  
number button and then press OK to confirm.  
Press  
to move, press OK to adjust.  
Sound Mode Standard  
Balance  
Auto Volume  
Press  
to choose the program , press teletext  
SOUND  
<
>
blue button to skip this program, The  
show on the right side of the program .  
will  
Choose the skipped program, press blue button  
again , you can cancel the skip ,The  
disappear .  
will  
Note:  
Auto volume: only available when the input  
signal volume is too large or distortion.  
Favourite  
4.TIME MENU  
Press  
to choose the program , press FAV  
button , it will show  
on the right side of the  
The forth item of the menu is the TIME MENU  
You can adjust the clock, power on/off time,  
program.Choose the FAV program , press  
FAV button again , you can cancel the FAV,  
the will disappear .  
sleep time etc Press  
adjust  
to move, press OK to  
P.15  
 
NOTE:  
The default pass word is 0000, If you forget the  
password, you can use the super password:9443.  
Clock -- -- -- --  
Off Time  
Block program: Press  
to choose the  
On Time  
program ,press teletext green button to block  
the program. If you want unblock the program,  
pls enter the main menu , input the password,  
then press green button again.Parental  
Sleep Timer  
TIME  
<
>
Auto Sleep  
Time Zone  
guidance: Press  
to choose rating.  
NOTE:  
Within 15 minutes there is no signal, the TV  
will auto sleep , if Auto Sleep is set ON. The  
clock time can get from the DTV system auto.  
7.EPG Menu(Electronic Program  
Guide).  
The EPG menu is used to look at what is being  
broadcasted on DTV or Radio channel in the day.  
To access the EPG menu, press the EPG  
botton,the following menu will be displayed:  
5.OPTION MENU  
PROGRAMME GUIDE  
TIME  
The fifth item of the MENU is the OPTION  
MENU. You can adjust the Menu language,  
Audio language,Subtitle language etc.  
28 Apr 04:39  
800 SZTVM01  
801 SZTVM02  
802 SZTVM03  
803 SZTVM04  
804 Date  
No Information  
No Information  
No Information  
No Information  
No Information  
OSD Language English  
Audio Languages UK  
Subtitle Languages UK  
Country UK  
Record  
OK  
INFO  
Schedule  
Remind  
INDEX  
PVR File System  
Restore Factory Default  
OPTION  
<
>
INFO  
1.  
Use  
to choose the programs , Press  
INFO key, you can display the highlight program's  
information.  
In PVR File system menu you can set up USB  
disk for PVR.  
Schedule  
Press the teletext yellow key, It can list  
2.  
Select Disk  
C:  
all the reminder schedule, press  
to choose  
Check PVR File System Start  
the list, press red key  
schedule list.  
to delete the  
DELETE  
USB Disk  
Format  
Schedule List  
04:55 28th Apr  
Delete  
Time Shift Size  
Speed  
Programme Title  
Time Date  
Channel Name  
Free Record Limit 6 Hr.  
NOTE:  
Restore factory default will clear all the programs  
and password.  
3.  
Record  
Press the red key ,It can set the program  
to be recorded.  
6.LOCK MENU  
The sixth item of the menu is the LOCK MENU  
You can lock system, set password, block program  
and set parental guidance Once you set the lock  
system on you can not search the channels or  
change any programs.  
Remind  
4.  
Press the blue key to choose one program  
and set up one reminder time, the TV screen will  
skip to the choosed program in the reminder time  
automatically.  
Lock System  
Set Password  
Block Program  
Reminder setting  
_
802 SZTVM03  
+
08 Minute  
05 Hour  
Parental Guidance Off  
LOCK  
<
>
Apr Month  
28 Date  
Once Mode  
OK  
BACK  
P.16  
 
8.PVR function  
1.Prepare to record the program  
From OPTION MENU enter into PVR File  
System in OPTION MENU, please  
choose check PVR File System. Click  
OK, until checkingchange into  
Success.  
Note: please check the term speed. If it  
is HD support, that means the speed of  
USB device is available for time shift and  
record. If not, please format the device, to  
make sure the device available. The default  
Free Record Limitis 6 hour, if the space  
on the disk is big enough. If the space is not  
big enough, the record time should be  
shorter, depends on the room on the  
device. During the check PVR File  
Systemchecking, please do not take any  
other operation until it finished.  
Select Disk  
C:  
Check PVR File System  
Start  
USB Disk  
Format  
Time Shift Size  
Speed  
Free Record Limit  
OK  
6 Hr.  
MENU  
Select Disk:select which disc to save the  
record file.  
Select Disk  
USB  
Disk  
0
The recordings have to be done with TV PVR  
system. It can only be played in the same TV,  
not in other kind of devices (computer, DVD,  
etc...) which doesn't be compatible with .TS.  
Format.  
C:  
See that in order to carry out any kind of  
recording, the TV will oblige you to format the  
connected device to store the recording.  
Check PVR File System: check if the PVR File  
System set up in the USB device or not.  
WARNING. WHEN YOU FORMAT, THE  
EXTERNAL DEVICE WILL LOSE ALL THE  
FILES AND INFORMATION YOU STORAGE  
IN THE DEVICE.  
Format:  
From OPTION MENU enter into PVR File  
System as below:  
File System Size  
PVR File System Type Hi Speed FS  
OSD Language  
Audio Languages  
Subtitle Language  
English  
PVR File System Size  
SD 104 Mins  
All  
Country  
PVR File System  
Restore Factory Default  
UK  
HD 29 Mins  
OPTION  
<
>
MENU  
File System Size  
PVR File System Type  
PVR File System Size  
SD 104 Mins  
FAT32  
All  
HD 29 Mins  
OK  
P.17  
 
2.Record the program  
(Suggest to format the device by  
High Speed Fs..., which can speed up  
the record.)  
As playing the DTV source, choose the  
channel and click record, the record  
frame will pop up. Click recordagain,  
the record frame will disappear and the  
RECicon still on the left top. It will  
disappear until you click stop.  
Format disk  
Format disk  
Warning! All data will be lost.  
3.Play the record  
Start  
Exit  
In USB, the record program will be  
saved in the folder _MSTPVRon the  
device.  
Format disk  
Do not unplug USB device.  
Formatting,please wait  
1. The USB storage size needs to be the  
size between 4GB to 500GB.  
2. Video may become pixelated when Video  
bit rate is too low.  
3. Not all USB devices are compatible.  
Below is a list of recommended USB  
drvies.Models that are not listed may be  
compatible, but it is not guaranteed to work.  
below menu appear after Format finish:  
Select Disk  
C:  
Check PVR File System  
Checking  
The USB support list are the same as  
Timeshift function ,see page 20.  
USB Disk  
Format  
Pass  
Pass  
Time Shift Size  
Speed  
All  
Checking  
Free Record Limit  
MENU  
6 Hr.  
Select Disk  
C:  
Check PVR File System  
SUCCESS  
USB Disk  
Pass  
Pass  
All  
Format  
Time Shift Size  
Speed  
Free Record Limit  
MENU  
HD support 2048 KB/s  
6 Hr.  
If you select the Hi Speed FS format mode,  
then you can change the time shift size:  
Time Shift Size  
Time Shift Disk Size  
SB 14 Mins  
512 MB  
HD  
4
Mins  
P.18  
 
9.Timeshift function  
1.Prepare to record the program  
00:00:33/00:04:22  
Stop  
This TV allows you to pause and record the  
currently watched digital program to a USB  
storage device, and to resume to the point  
where it was paused.  
Play  
FB  
FF  
Prev.  
Next  
Pause  
NOTE:  
NOTE:  
Formatting a USB 2.0 storage device will  
be needed. Save your original data  
before formatting. All the data stored in  
the USB device will be erased after  
formatting.  
Please do not unplug the USB storage  
device when the Time Shift function is  
activated.  
Approximately 4GB of memory buffers  
about offer 140 minutes.  
USB Drive Storage Format  
Select to format the USB device and  
allocate the amount of space for the Time  
Shift function.  
NOTE:  
The format process will take at least 2  
minutes. Please do not turn off the power  
or remove the USB device during  
formatting.  
During formatting, a speed test will be  
done on the USB device. If it fails, it  
means the USB device may not support  
the Time Shift function.  
Record a paused DTV program to  
USB storage device  
1. While in the DTV input source, insert  
USB storage device to the USB port on the  
side of your TV.  
2. Press PAUSE 33 to start Time Shift  
function. The TV program paused. The Time  
Shift OSD appears, and starts recording.  
3. Press STOP 29 to stop Time Shift  
function and stop recording program.  
SUBPAGE  
SIZE  
MIX  
SUBTITLE  
REC/REP  
29  
33  
P.19  
 
Time Shift limitations:  
1. When the Time Shift feature is activated,  
only the PLAY/PAUSE/STOP/FWD/REV/  
VOL+/VOL-/MUTE keys and some basic  
operation keys (ENTER/EXIT/navigation  
keys) are available.  
2. Video playback may not be smooth and  
skip if USB recording speed does not meet  
the minimum requirements .  
3. Do Not remove USB disk or switch off the  
power during Time Shift operations. It will  
abort once the signal is lost.  
4. Do Not remove the signal source during  
Time Shift operations.  
5. Do Not quickly and repeatedly change  
operations between  
PLAY/PAUSE/FWD/REV.  
6. Video may become pixelated when Video  
bit rate is too low.  
7. Not all USB devices are compatible, The  
USB hard disk drive electricty should be  
< 500MA.  
Below is a list of recommended USB drvies.  
Models that are not listed may be  
compatible, but it is not guaranteed to work.  
8. This feature is not available for all digital  
TV,such as scrambled or audio only  
channels.  
P.20  
 
10.USB Player  
00:00:33/00:04:22  
Press source key, and selsct USB in soure  
list, press OK button to enter the USB menu.  
Info.  
Pause  
FB  
FF  
Prev.  
Next  
Stop  
Repeat ALL  
Press  
to select the function icon, press OK  
USB 2.0  
button to confirm the function.  
Press  
NOTE:  
or EXIT button to exit the control bar.  
You can adjust the audio track, or program in the  
Info menu while Playing the video file.Choose the  
Info icon and press OK can display the Info MENU.  
PHOTO  
MUSIC  
MOVIE  
TEXT  
Sample1.ts  
Resolution: 720x576  
Please make sure that the USB device have  
plugged in the slot.There are four type media  
item can be selected, such as photo, music,  
Movie, and text. Select the type media item by  
AudioTrack:  
Subtitle:  
1/2  
1/1  
1/6  
pressing  
, press OK button to enter  
Program:  
the disk selection menu.  
Size:  
30574 KBytes  
1/1  
Close  
Return  
C
Press the  
to select the right disk and press  
OK to display media files and folder list or  
choose Return to back to the media type  
selection menu.  
1/1  
Resolution: 688x412  
AudioTrack: 1/2  
Return  
Movies  
Subtitle:  
1/1  
1/5  
Program:  
Size: 511457 KBytes  
Sample1.ts  
Sample2.ts  
Sample3.ts  
Sample4.ts  
Select the media file by pressing  
or  
, then  
the preview frame will pop up.Press the button  
to play the media file in full screen.When the  
media file (photo,music, Movie, or text type) is  
playing, press the OK or Info button can display  
the control bar.  
P.21  
 
05 Trouble shooting  
Trouble phenomenon Symptom  
Inspection Check  
Picture  
Audio  
antenna position, direction  
or connection  
Snow  
Ghost  
Noise  
Normal audio  
Noise  
antenna position, direction  
or connection  
electronic equipment,car/  
motorcycle,fluorescent light  
Interference  
Volume(check if mute is  
activated or if the audio system  
connections are not correct)  
Normal Picture  
Mute  
Power cord is not inserted  
Power switch is not opened  
Contrast and brightness/volume  
setup  
No picture  
No colour  
Mute  
Press standby key on the remote  
control for inspecting  
Normal audio  
Colour control  
retune channel  
Picture  
breaking up  
Normal audio  
or weak  
No colour  
TVsystem  
Noise  
P.22  
 
Specification  
Colour system  
PAL-B/G, I, D/K  
'
SECAM-B/G, D/K, L, L  
Sound system  
Video input  
BG, DK, I, L,L'  
SCART, YPbPr,AV,  
VGA, HDMI, USB.  
480i/p, 576i/p,  
720p, 1080i, 1080p  
Y/Pb/Pr  
HDMI  
480i/p, 576i/p, 720p, 1080i, 1080p  
AC 100-240V 50/60Hz  
Power  
requirements  
Power  
55W(26")  
2x5W  
75W(32")  
2x8W  
consumption  
Audio output  
Working temperature:  
+5 C - +35 C  
Working humidity:  
20% - 80%  
Storage temperature:  
-15 C - +45 C  
Environment  
conditions  
Storage humidity:  
5% - 90%  
User manual  
Remote control  
Battery (x2)  
Accessory  
Quick start guide  
* The part specifications of this TV set provided here are for reference only.  
Difierences may occur as product technology is updated.  
Design and specifications are subject to change without notice.  
P.23  
 
 

Graco Inc Paint Sprayer 231063 User Manual
Great Dane Lawn Mower GSKH1848S User Manual
Harbor Freight Tools Automobile Parts 212 User Manual
Harman Kardon Stereo Amplifier HK 670 User Manual
Hoshizaki Clock Radio CF2A FS User Manual
Hotpoint Dishwasher FDEF 4101 User Manual
Hotpoint Dishwasher HDA2020ZBB User Manual
Humax TV Receiver LGB 26TPVR User Manual
IBM Computer Monitor T 55A User Manual
IBM Flat Panel Television P N 39T2034 User Manual