Haier Flat Panel Television HTN20R16 User Manual

OWNER'S MANUAL  
20" Colour Television  
HTN20R16  
VIDEO L-AUDIO-R  
TV/AV  
MENU  
VOL-  
VOL+  
CH-  
CH+  
Please read this manual carefully before using this TV set and keep it for future reference.  
 
Important safety Instructions  
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE  
THIS APPLIANCE TO RAIN OR MOISTURE.  
CAUTION  
RISK OF ELECTRICSHOCK  
DO NOT OPEN  
THIS SYMBOL INDICATES THATDANGEROUS  
VOLTAGECONSTITUTING ARISK OF ELECTRIC  
SHOCK IS PRESENTWITHIN THIS UNIT.  
CAUTION: TO REDUCETHE RISK OFELECTRIC  
SHOCK, DO NOTREMOVE COVER (OR BACK).  
NO USER SERVICEABLEPARTS INSIDE.REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL  
THIS SYMBOL INDICATES THATTHERE ARE  
IMPORTANT OPERATING AND MAINTENANCE  
INSTRUCTIONS IN THELITERATURE  
ACCOMPANYING THEAPPLIANCE.  
The important note is located on the rear of the cabinet.  
IMPORTANT SAFEGUARDS  
1. READ INSTRUCTIONS  
All the safetyand operating instructionsshould be readbefore the unitis operated.  
2. RETAIN INSTRUCTIONS  
The safety andoperating instructions shouldbe retained forfuture reference.  
3. HEED WARNINGS  
All warnings onthe unit andin the operatinginstructions should beadhered to.  
4. FOLLOW INSTRUCTIONS  
All operating anduse instructions shouldbe followed.  
5. CLEANING  
Unplug this unitfrom the walloutlet before cleaning. Do not useliquid cleaners oraerosol  
cleaners.  
Use a dampcloth for cleaningthe exterior cabinetonly.  
6. ATTACHMENTS  
The manufacturer ofthis unit doesnot make anyrecommendations for attachments, as they  
may cause hazards.  
7. WATER AND MOISTURE  
Do not usethis unit nearwater. Forexample, near abathtub, washbowl, kitchensink,  
laundry tub, ina wet basement, or near aswimming pool.  
8. ACCESSORIES  
Do not placethis unit onan unstable cart, stand, tripod, bracket, or table. The unit mayfall,  
causing serious injury, and seriousdamage to theunit.  
(symbol provided byRETAC)  
S3126A  
8A. An appliance and cartcombination should bemoved with care. Quick  
stops, excessive force, and uneven surfacesmay cause theappliance and  
cart combination tooverturn.  
9. VENTILATION  
Slots and openingsin the cabinetback or bottomare provided forventilation, and toensure  
reliable operation ofthe unit, andto protect itfrom overheating. These openings mustnot be  
blocked or covered. The openings should never beblocked by placingthe unit ona bed,  
sofa, rug, orother similar surface. This unit should never beplaced near orover a radiatoror  
heat source. This unit shouldnot be placedin a built-ininstallation such asa bookcase or  
rack unless properventilation is providedor the manufacturer'sinstructions have been  
adhered to.  
10. POWER SOURCE  
This unit shouldbe operated onlyfrom the typeof power sourceindicated on therating plate.  
If you arenot sure ofthe type ofpower supply toyour home, consultyour appliance dealeror  
local power company. For unitsintended to operatefrom battery power, or othersources,  
refer to therespective pages inthis Owner's Manualfor their operatinginstructions.  
 
Important safety Instructions  
11. GROUNDING OR POLARIZATION  
This unit is equipped with a polarized alternating-current line plug (a plug having one blade  
wider than the other). This plugwill fit into the power outlet only one way. This isa safety  
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the  
plug should still fail to fit, contact your electrician to replace your obsolete outlet. Instead of  
the polarized alternating-current line plug, your unit may be equipped with a 3-wire  
grounding-type plug (a plug having a third (grounding) pin). This plug willonly fit into a  
grounding-type power outlet. This too, isa safety feature. If you are unable to insert the plug  
into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the  
safety purpose of the grounding-type plug.  
12. POWER-CORD PROTECTION  
Power-supply cords should be routed so that they are not likely to be walked on or pinched  
by items placed upon or against them, paying particular attention to cords at plugs,  
convenience receptacles, and the point where they exit from the appliance.  
13. LIGHTNING  
To protect your unit from a lightning storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.  
This will prevent damage to the unit due to lightning and power line surges.  
14. POWER LINES  
An outside antenna system should not be located in the vicinity of overhead power lines or  
other electric light or power circuits, or where it can fall onto or against such power lines or  
circuits. When installing an outside antenna system, extreme care should be taken to keep  
from touching such power lines or circuits, as contact with them might be fatal.  
15. OVERLOADING  
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric  
shock.  
16. OBJECT AND LIQUID ENTRY  
Do not push objects through any openings in this unit, as they may touch dangerous voltage  
points or short out parts that could result in fire or electric shock. Never spill or spray any  
type of liquid into the unit.  
17. OUTDOOR ANTENNA GROUNDING  
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable  
system is grounded to provide some protection against voltage surges and built-up static  
charges, Section 810 of the National Electrical Code (NEC), ANSI/NFPA70, provides  
information with respect to proper grounding of the mast and supporting structure,  
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,  
location of antenna discharge unit, connection to grounding electrodes, and requirements  
for the grounding electrode.  
18. SERVICING  
Do not attempt to service this unit yourself as opening or removing covers may expose you  
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.  
2
 
Important safety Instructions  
19. DAMAGE REQUIRINGSERVICE  
Unplug this unitfrom the walloutlet and referservicing to qualifiedservice personnel under  
the following conditions:  
a. When thepower-supply cord orplug is damaged.  
b. If liquidhas been spilled, or objects havefallen into theunit.  
c. If theunit has beenexposed to rainor water.  
d. If theunit does notoperate normally byfollowing the operatinginstructions. Adjust  
only those controlsthat are coveredby the operatinginstructions, as animproper  
adjustment of othercontrols may resultin damage andwill often requireextensive  
work by aqualified technician torestore the unitto its normaloperation.  
e. If theunit has beendropped or thecabinet has beendamaged.  
f. When theunit exhibits adistinct change inperformance, this indicatesa need for  
service.  
20. REPLACEMENT PARTS  
When replacement partsare required, besure the servicetechnician uses replacementparts  
specified by themanufacturer or thosethat have thesame characteristics asthe original part.  
Unauthorized substitutions mayresult in fire, electric shock orother hazards.  
21. SAFETY CHECK  
Upon completion ofany service orrepairs to thisunit, ask theservice technician toperform  
safety checks todetermine that theunit is inproper operating condition.  
22. HEAT  
The product shouldbe situated awayfrom heat sourcessuch as radiators, heat registers,  
stoves, or otherproducts (including amplifiers)that produce heat.  
23. CONNECTING  
When you connectthe product toother equipment, turnoff the power and unplugall of the  
equipment from thewall outlet. Failureto do somay cause anelectric shock andserious  
personal injury. Read theowner's manual ofthe other equipmentcarefully and followthe  
instructions when makingany connections.  
24. SOUND VOLUME  
Reduce the volumeto the minimumlevel before youturn on theproduct. Otherwise, sudden  
high volume soundmay cause hearingor speaker damage.  
25. SOUND DISTORTION  
Do not allowthe product outputdistorted sound fora longtime. Itmay cause speaker  
overheating and fire.  
26. NOTE TO CABLE TVSYSTEM INSTALLER  
This reminder isprovided to callthe Cable TV system installer'sattention toArticle 820-40 of  
the NEC thatprovides guidelines forproper grounding and, in particular, specifies that the  
cable ground shallbe connected tothe grounding systemof the building, as close tothe point  
of cable entryas practical.  
 
Function Buttons and External  
Connections  
Front panel the TV set Video 1  
VIDEO L-AUDIO-R  
MENU  
TV/AV  
VOL-  
VOL+  
CH-  
CH+  
MENU  
Channel  
down/up  
VIDEO IN jack  
Indicator light  
Signal  
Receiver  
AUDIO IN (L/R) jacks  
Power Switch  
TV/AV  
switching  
Volume  
decrease/  
increase  
Rear panel of the TV set Video 2  
Component video  
input terminal  
Y
Cb  
Cr  
Antenna input socket  
Video output terminal  
Video input terminal  
Audio right channeloutput terminal  
Audio left channeloutput terminal  
Audio right channelinput terminal  
OUT  
IN  
L
R
VIDEO  
AUDIO  
Audio left channelinput terminal  
 
Installation  
Antenna connection  
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV  
system or an outdoor antenna .In different places, the suitable antenna type and position  
may vary.  
Mixer  
(not incl.)  
Antenna/ CATV input  
75 standard  
coaxial type  
AC power socket  
Note:  
* It is recommended that a 75 ohm coaxial antenna is used to avoid  
interference.  
*To avoid interference from electrical signals, do not bind the antenna cable  
together with any mains lead.  
Preparation for the remote control  
Battery installation  
!
Remove the battery cover.  
!
Insert two size AA batteries matching  
the +/-polarities of the battery to the +/-  
marks inside the battery compartment.  
Tips for remote operation  
!When the remote control will not be used for a long period of time or when the  
batteries are worn out, remove the batteries to prevent leakage.  
!
Do not throw the batteries into fire. Dispose of used batteries in the specified  
manner.  
Do not drop, dampen or disassemble the remote control.  
!
 
Connecting the TV set to the other video and audio equipment  
Connection of AV input /output terminal  
The figure below shows how to connect external equipment using AV signals.  
Component video inputs  
DVD Player  
VCR  
input  
Audioright  
Audio left input  
Video input  
Audio right output  
output  
Audio left  
output  
Video  
There is also an AV input on the front of your television. Use the Left Audio input  
(white terminal on the TV), if you are connecting equipment with mono sound. The  
MONO sound will be delivered by both left and right speakers.  
DVD player  
VCR  
Video output  
Audio left output  
Audio right output  
 
Using the Remote Control  
Buttons on the remote control  
Power Switch  
Go to TV Menu  
Channel Adjusting  
Volume Adjusting  
1
3
2
4
Channel / Track Selection  
Return to Previous Channel  
Select 1 or 2 Digit Channel / Track Number Inputting  
TV / AV Mode Selection  
CCD ( closed caption) On / Off  
Mute Sound  
Adjust Picture Mode  
On Screen Display  
Exit On Screen Display  
5
7
6
8
9
10  
12  
13  
11  
 
Using the Remote Control (Continued)  
Remote Control Features  
Power Button:  
To turn power ON or OFF , press power button on remote control.  
System and ChannelDisplay Button:  
This will show you the current channel number. System type will  
also be displayedif set.  
TV/AV input Button:  
This button has three settings: A)TV, B)VIDEO 1, C)VIEDO 2,  
D)DVD .Pressing this button will cycle you through each input  
type.  
Mute Button:  
Press mute button to turn off the TV volume.  
Direct Channel Access Selection:  
Follow one of the procedures noted below to access a channel.  
One Digit Channel Selection:  
When you want to select one digit channel ,press 0 and channel  
number digit.  
Two Digit Channel Selection:  
When you want to select two-digit channel. Press the digit  
button twice, thenenter the twochannel digits .  
CCD Button:  
Press CCD buttonto set the C.Caption (ClosedCaptioning).  
 
Using the Remote Control (Continued)  
Channel (+/-) Select Button:  
You can go up and down the channels by pressing CH (+) button and CH (-) button.  
This button can also be used in adjusting the functions in the Menu Mode.  
Menu Select Button:  
You can select the menu by pressing the MENU button. You  
can call on the menu (Video, Audio, Timer, Setup, Channel,  
Calender and Password) by pressing the corresponding  
button on the remote control.  
Volume (+/-) Select Button:  
You can increase the volume by pressing VOL (+) button and  
decrease VOL(-) button. This button can also be used in adjusting the function  
selections in the Menu Mode.  
Last Channel Recall Button:  
This feature allows you to recall the previously viewed channel.  
Picture Preference Select Button:  
By pressing this exclusive personal preference button, you can  
select different preset brightness shades for various viewing  
environments.  
System and Channel Display Cancel Button:  
This button allows you to turn off the channel display and exit  
system menus.  
 
Menu Functions  
Information to user: This television receiver is equipped with  
close caption decoder and parental blocking technology as  
required by the FCC.  
Menu Functions  
Video Setup:  
Pressing MENU button once will bring the Video Setup menu on the TV.  
The following is shown on your TV screen:  
Video  
Picture  
Brightness  
Color  
Sharpness  
Hue  
70  
32  
50  
40  
50  
Neutral  
Color Temp.  
Follow the procedure below to adjust the picture quality of your choice:  
1.Press the CH(+) and CH(-) button to go up and down the menu.  
2.Press the VOL(+) and VOL(-) button to increase and decrease the level to your  
preference for each item.  
Picture Quality Adjustments:  
Picture:  
By increasing the level. It will adjust white areas of picture and by  
decreasing the level , it will adjust black areas of picture.  
Brightness: By decreasing the level, the brightness level will be decreased. By  
increasing the level, the brightness level will be increased.  
Color:  
By decreasing the level, color intensity will be decreased. By  
increasing the level, color intensity will be increased.  
Sharpness: By decreasing the level, the picture becomes softer. By increasing  
the level, the picture becomes clearer.  
Hue:  
This setting allows you to adjust the tint of the picture.  
By decreasing the level, it will give red tint to skin color and by  
increasing the color it will give green tint to skin color.  
Color Temp : Press the VOL(-/+) buttons to select from three color temperature  
settings: A)Neutral, B)Warm, C)Cool.  
 
Menu Functions (Continued)  
Audio Setup:  
By pressing MENU button ,and then pressing VOL(-/+) buttons it will bring you to  
Audio Setup display. You will see the following menu on your TV screen:  
Audio  
Volume  
45  
Follow the procedure below to adjust the sound quality:  
Press VOL (+) button to increase and VOL (-)button to decrease the level to your  
preference.  
Timer Setup:  
By pressing MENU button ,and then pressing VOL(-/+) buttons it will bring you to  
Timer Setup display. You will see the following menu on your TV screen:  
Timer  
Clock  
Time-on  
Ch. Select  
Time-off  
Sleep Time  
Remind Time  
Ch. Switch  
17:18  
18:00  
1
--:--  
0
--:--  
1
Follow the procedure below to select one of the above options:  
1.Press the CH(+) and CH(-) button to go up and down the menu.  
2.Press VOL (+) button or VOL (-) button to select your preference.  
Clock:  
Press VOL (-/+) buttons for HOURS and VOL(-/+) buttons for MINUTES  
adjustment.  
Time-On:  
Press VOL(-/+) buttons for HOURS and VOL (-/+) buttons for  
MINUTES adjustment. This feature works like an alarm clock. Your  
TV will turn on at the set time.  
Ch. Select:  
Time-Off :  
This feature switches you to your favorite channel at the set time.  
Press VOL(+) and VOL(-) buttons to select the channel.  
Press VOL (+/-) buttons for HOURS and VOL (+/-) buttons for  
MINUTES adjustment. This feature works like an alarm clock. Your TV  
will turn off at the set time.  
Sleep Time: This feature allows you to turn off the television after a pre-selected  
number of minutes (180, 170,160, ........,10 and 0).  
Remind Time: Press VOL(+/-) buttons to set HOURS of attention and VOL (+/-) buttons  
to set MINUTES of attention. You will see the flashing time on your TV  
when the reminder time arrives. Note: This exclusive feature can  
remind you of important tasks when watching TV.  
Ch. Switch: This feature lets you store your favorite channel. Once you store the  
channel number in this function, when the set time is up, it will switch  
over to the set channel. This feature is used with the Exchange feature.  
Press VOL(+) or VOL(-) button to select the channel.  
 
Menu Functions (Continued)  
Function Setup:  
By pressing the MENU button, and then pressing VOL(-/+) buttons, you will enter the  
Function Setup menu. You will see the following menu on your screen:  
Setup  
Language  
Background  
Black stretch  
VNR  
Fade  
AVL  
English  
on  
on  
on  
off  
on  
on  
C. Caption  
Demo Mode  
Follow the procedure below to select one of the above options:  
1.Press the CH(+) and CH(-) button to go up and down the menu.  
2.Press the VOL(+) and VOL(-) button to increase and decrease the level to your  
preference for each item.  
Language:  
Use VOL(-/+) buttons to selectthe OSD language.  
Background: Press the VOL(-/+) buttons to select between Background On or  
Background Off. When the Background On function is chosen, a  
moving "NO SIGNAL" sign will be displayed if there is no input signal  
to the set.  
Black Stretch: Press VOL(-/+) buttons to turn theBlack Stretch feature On orOff.  
When the Black Stretch function is on, the screen automatically  
increases the contrast range.  
VNR:  
Press VOL (-/+) buttons to turn the VNR function On orOff. VNR is a  
term for Video Noise Reduction, a built-in device that reduces video  
noise interference so the viewer is assured a clear picture.  
FADE control allows for the picturetube to warm up andgently turn  
on, which can help prolong the life of the picture tube.  
Automatic Volume Limit control reduces effect of large volume changes  
such as when the adscome on. Press VOL(+) button or VOL(-) button to  
set it On or Off.  
Fade:  
AVL:  
C.Caption:  
Press VOL (-/+) buttons to select the Closed Caption options. Closed  
Captioning helps the hearing impaired with the broadcast program, as  
well as helping children learnhow to read. A built in decoder displays  
the audio portion of a program as text on the screen when this option is  
selected.  
OFF: When Off is displayed on TV, it means C.Caption is turned off.  
CC1: When Cc1is displayed on TV means C.Caption is turned on.  
CC2 to CC4: For other modes of video related broadcast information.  
T1: For program guide and other information displayed bybroadcasters.  
(This blocks a large portionof the picture on yourscreen).  
T2 to T4 :For other modes of informationdisplayed by broadcasters.  
(This blocks a large portionof the picture on yourscreen).  
IMPORTANT: Closed captioning availability entirely depends on broadcasters  
supplying the signal. Therefore, closed captioning might not always be available and  
language availability will differ by broadcast.  
Note: Select CC1 for full translation of the primary language such as English in your  
area. Select CC2 for secondary language translation such as French or any other  
language that may be broadcast in your area.  
Demo Mode: This will display the main functions of the TV set.  
 
Menu Functions (Continued)  
Channel setup:  
By pressing MENU button ,and then pressing VOL-/+ button it will bring you to  
Channel Setup menu. You will see the following display on TV screen.  
Channel  
Channel System Auto  
Antenna  
Skip  
Current Ch.  
Fine  
Auto Program  
TV  
off  
2
Follow the procedure below to select above options:  
1.Press the CH(+) and CH(-) button to go up and down the menu.  
2.Press VOL (+) button or VOL (-) button to select your preference.  
Channel System: Press the VOL(-/+) buttons to select the correct channel system.  
In general, you can set it as "Auto" Auro,NTSC and NTSC443  
will display in turn  
Antenna:  
Press VOL (+) button or VOL(-) button to select AerialAntenna  
(TV) or Cable Antenna (CATV) reception preference.  
Press VOL(+) button or VOL(-) button to add or delete a channel  
from the stored memory.  
Skip :  
Current Ch. :  
Press VOL(+) button to go up and VOL (-) button to go down to set  
the channel position. The display will show the current playing  
channel.  
Channel Coverage by Antenna:  
Antenna Type  
VHF  
Channel Range  
2-13  
UHF  
14-69  
CATV  
1-125  
Fine:  
If the picture and/or sound are poor, try using the FINE TUNE  
feature. Do not use this feature unless reception is poor. Press  
VOL (+/-) to start the Fine Tune function.  
Auto Program: Press VOL (+) button to auto program channels. This search  
automatically adds only the active channels in your area to the TV's  
memory. It deletes any channels on which there is no broadcast or  
a poor signal.  
Note: The Auto Search function will scan the channels on the selected antenna  
input. If the TV is connected to cable, please select Cable under ' Air Cable ' sub menu.  
 
Menu Functions (Continued)  
Calendar:  
Your TV has been designed with a calendar. By pressing MENU button ,and then  
pressing VOL(-/+) buttons it will bring you to Calendar. You will see the following  
display on TV screen.  
OCT  
Calendar  
2005 9 14  
Follow the procedure below to adjust the Calendar date:  
1. Press the CH(+/-) buttons to select the year item, the month item or the date item.  
2. Press the VOL(-/+) buttons to change the year, month or day.  
3. Press EXIT button to exit the calendar mode.  
 
Menu Functions (Continued)  
PARENTAL LOCK Setup:  
Press the MENU Button on your remote control to go to Password menu, then input  
the password (0000). It will bring Parental Lock set up menu onto the screen. You  
will see the following menu on your screen:  
Parental Lock  
Passsword  
Password  
----  
Parental Lock  
TV Rating  
off  
MPAARating  
Lock Menu  
Change Password  
This function enables you to lock certain TV channels in accordance to the V-CHIP  
requirement established by the FCC.  
To setup the PARENTAL LOCK function:  
Select the TV Rating option. You will see the TV Rating menu on your TV screen:  
1.Press CH(+/-) buttons to go up and down the menu.  
2. Press VOL(-/+) buttons to go into TV Rating and Movie Rating menus.  
3.Press VOL(-/+) buttons to set the Parental Lock On and Parental Lock Off.  
When TV rating is selected, you will see the following rating table on your TV screen.  
TV Rating  
D
L
S
V
Rating  
FV  
TV-Y >U  
U U  
TV-Y7  
TV-G  
U
U
U
U
TV-PG  
TV-14  
TV-MA  
U
U
U
U
U
U
U
U
U
U
U
Note: You can press CH(+/-) buttons to go up and down the menu, then press VOL(+)  
button to select "B" (block channel) or "U" (unblock channel).  
 
Menu Functions (Continued)  
When MPAA Rating is selected, you will see the following rating table on your TV  
screen.  
MPAARating  
G
U
U
P G  
P G - 1 3  
U
R
U
NC-17 U  
X
U
Parental Lock off means the lock function is turned off . If the Parental Lock is in  
"Off" mode then function will not be active to accept the broadcast signal.  
Parental Lock on means the lock function is turned on. If the lock is in the "On"  
mode then function is activated to accept the broadcast signal.  
Password  
The "Default Password" preset by the manufacturer is "0000" . If you want to change  
the preset password to your own password, just choose any four digits that can be  
easily remembered and set. Once you set password for a particular channel, that  
channel will be blocked. This channel can only be accessed with the password.  
Lock Menu  
AV Lock: When it is set to On, the AV inputs are locked and therefore the TV will not  
allow you to view sources hooked up via AV inputs on the front and back of the TV.  
To unlock this feature, simply set this option to Off  
Program Lock: When it is set to On, the current channel is locked and can therefore  
not be viewed. To view the channel (unlock) once again, set this option to Off.  
 
Menu Functions (Continued)  
PARENTAL LOCK TECHNOLOGY:  
The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV  
PROGRAMS Guide ratings to block certain types of TV programs and movies.  
To clearly understand TV program rating codes, read the following information:  
U.S. TV Program Ratings  
NR: Not Rated-this means that programs are not rated or rating does not apply.  
TV-Y: For all children - these types of rated programs are designed for a very young  
audience, including children from ages 2-6.  
TV-Y7: Directed towards older children - this type of rated programs may include  
comedic violence of mild physical, or may frighten children under the age of 7.  
TV-G: General audience - these types of rated programs contains little or no  
violence, no strong language, and little or no sexual dialogue and situations.  
TV-PG:Parental Guidance Suggested-this type of rated programs may contain  
limited violence, some suggestive sexual dialogue and situations, and rare  
language.  
TV-14: Parents strongly cautioned-these types of rated programs may contain sexual  
content, strong language and more intense violence.  
TV-MA:Mature audience only these types of rated programs may contain sexual  
violence, explicit sexual content and profane language.  
FV: This type of rated programs contain Fantasy and cartoon violence.  
Violence: This type of rated programs contain violence.  
S:  
L:  
D:  
This type of rated programs contain sex.  
This type of rated programs contain offensive language.  
This type of rated programs contain dialogue with sexual content.  
 
Menu Functions (Continued)  
To understand clearly about movie rating codes, read the following list:  
U.S. Movie Rating Chart  
NR: This means movie is not rated yet. It is pending government rating approval.  
G:  
General Audience-this type of movie rating means all ages admitted to see  
the movie.  
PG-13:Parents Strongly Cautioned - this type of movie rating means some material  
may not be appropriate for children under13.  
R:  
Restricted- This type of movie rating means children under 17 of age require  
to be with parent or guardian.  
NC-17:This type of movie rating means no one 17 and under admitted.  
X: This type of movie rating means adults only.  
To clearly understand Canadian program rating codes, read the  
following list:  
Canadian English Rating Chart  
E: These types of programs are exempt from the rating system. Exempt  
programming includes: news, sports, documentaries, talk shows, music  
videos, and variety of other programs.  
C: This type of programming is intended for children under age 8. There is no  
offensive language, nudity or sexual content.  
C8+:These types of rated programs are generally considered acceptable for children  
8 years and over. There is no profanity, nudity or sexual content.  
G: These types of rated programs are generally suitable for all audiences.  
PG: Parental Guidance Suggested -in these types of rated programs, some material  
may not be suitable for children.  
14+: In these types of rated programs, some content may not be suitable for viewers  
under the age of 14.Parents are strongly cautioned not to have their children  
view 14+ rated programs by pre-teens and early teens.  
18: Adults Only-these types of rated programs are only for adult viewers only.  
 
Troubleshooting guide  
To assist in location possible faults use help guide below.  
BREAKDOWN PHENOMENON  
CHECKING  
PICTURE  
SOUND  
The aerial direction and connection  
Picture with snow  
Noise  
This is called "ghosting" and can be minimized with  
an outside aerial, and good quality cable and  
terminations. Altering the aerial direction can also  
minimize this effect.  
Double or Triple Image  
Normal  
Electrical interference which can be caused by cars,  
motorbikes etc, Fluorescent lamps and dirty  
insulators on overhead power cables.  
Noise  
Disturb  
Volume Sound mute  
Normal  
No Picture  
No colour  
No sound  
Ensure that the power supply is connected to  
the TV setand turned on. Also ensure that the  
TV set is not in "Listen Mode" or that the  
brightness and contrast are not turned down.  
No sound  
Adjust colour control  
Adjust channel again  
Normal volume  
Normal or Weak Volume  
Scramble  
Colour Purity isa fault thatcan be causedby moving the  
TV set, placingmagnets near theTV screen orturning  
on/off house holdappliances such asvacuum cleaners  
near the TVset. Turnthe TV off with themain power  
switch for 15minutes. When thepower is turnedon  
again the TVset will automaticallydegauss the picture.  
In severe casesleave the TVset turned offover night.  
Colour Spot  
Normal volume  
Note:  
1.If the fault can not be corrected using the above guide consult with your local authorized service  
center.  
2.The TV set must only be repaired by a qualified registered service person. Never attempt to  
remove the back cover as TV set has dangerous voltages inside that may cause a fatality or fire.  
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the  
materials in the cabinet expanding with room temperature changes.  
 
Specifications  
The specifications offered you here are for reference only. With product improvement  
there may be some differences between the description and the final product.  
Specifications  
Colour system  
Sound system  
Picture tube  
NTSC  
M
20 colour picture tube  
2X2W 10% THD  
Sound output power  
Power requirements  
Power consumption  
Dimension WDH  
AC 120V~ 60Hz  
70W  
20.7 Width x19.4 Depth x18.8 Height  
inches  
Remote control  
Owner's manual  
Battery ('AA' size)  
Warranty card  
X1  
X1  
X2  
X1  
Accessories  
NOTE  
Design and specifications are subject to change without notice.  
Dimensions quoted in this manual are approximate.  
 
Warranty  
Responsibility of Haierto the purchaserwith  
respect to theproduct, and shall  
This Haier brandproduct, when shippedin  
its original packaging, will be freefrom  
defective workmanship andmaterials, and  
agrees that itwill, at itsoption, either repair  
the defect orreplace the defectiveproduct  
with a newor re-manufactured equivalentat  
no charge tothe purchaser, for parts or  
labor for theperiods set forthbelow:  
constitute full satisfactionof all claims,  
whether based oncontract, negligence, strict  
duality or otherwise. In no eventshall Haier  
be liable, orin any wayresponsible for any  
damages or defectsin the productwhich  
were caused byrepairs or attemptedrepairs  
performed by anyoneother than an  
authorized service centeror dealer; norshall  
Haier be liable, or in anyway responsible  
for incidental orconsequential economic or  
property damage. Somestates do notallow  
the exclusion ofincidental or consequential  
damages, so thatabove exclusion maynot  
apply to you.  
This warranty doesnot apply tothe  
appearance of theproduct or theexterior of  
the product, whichhas been damagedor  
defaced, altered ormodified in designor  
construction. It doesnot apply tothe  
additional excluded itemsset forth below:  
The warranty commenceson the datethe  
item was purchasedand the original  
purchase receipt mustbe presented tothe  
authorized service centerbefore warranty  
repairs are rendered.  
THIS WARRANTYGIVES YOU  
SPECIFIC LEGAL RIGHTS. YOU MAY  
ALSO HAVE OTHER RIGHTSWHICH  
VARY FROM STATE TO STATE.  
Warranty period for this product:90 days labor  
and one yearparts.  
Additional items excludedfrom warranty  
coverage: non-rechargeable batteries.  
Where to obtainservice: For thelocation of  
the nearest Haierauthorized service centeror  
to obtain productliterature, accessories,  
supplies or customerassistance,  
The limited warrantydescribed herein isin  
addition to whateverimplied warranties may  
be granted topurchasers by law. ALL  
IMPLIED WARRANTIES INCLUDING THE  
WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR USEARE LIMITEDTO THE  
PERIOD(s) FROM THE DATE OF PURCHASE  
SET FORTH BELOW. Somestates do not  
allow limitations onhow long animplied  
warranty lasts, sothe above limitationmay  
not apply toyou.  
please call 1-877-337-3639.  
What to doto obtain service:ship or carryin  
your product toan authorized servicedealer  
or center .Besure to haveproof of purchase.  
If you shipthe product, besure it is  
packaged carefully.  
Haier America  
New York, NY 10018  
Neither the salespersonnel of theseller nor  
any other personis authorized tomake any  
warranties other thanthose described herein,  
or to extendthe duration ofany warranties  
beyond the timeperiod described hereinon  
behalf of Haier.  
The warranties describedherein shall bethe  
sole and exclusivewarranties granted by  
Haier and shallbe the soleand exclusive  
remedy available tothe purchaser. Correction  
of defects inthe manner andfor the period  
of time describedherein, shall constitute  
complete fulfillment ofall abilities and  
 
0090508486  
Ver. 01  
 

Grizzly Saw G1011Z User Manual
HannsG Computer Monitor HG216DP User Manual
Harbor Freight Tools Caulking Gun 46077 User Manual
Hotpoint Cooktop CEO 647 Z User Manual
Hotpoint Oven Accessories SX 1049L CX User Manual
HP Hewlett Packard Projector vp6100 Series User Manual
IBM Smoke Alarm UPS1481 UNIT User Manual
iLive MP3 Docking Station IB318B User Manual
Image Treadmill 831297570 User Manual
Impex Home Gym DBR 56 User Manual