HP Hewlett Packard Server rx5670 User Manual

QuickSpecs  
Overview  
HP Integrity rx5670 Server  
1. Memory Carrier 1 (4 slots)  
2. Redundant, Hot-swap Fans  
6. Ultra160 SCSI Hot-plug Disks  
7. Redundant, Hot-swap Power Supplies  
3. Core I/O Ultra160 SCSI, 10/100/1000Base-TX RS-232 and LAN Console 8. Itanium 2 CPUs  
4. PCI-X I/O Slots  
9. Memory Carrier 2 (24 slots)  
5. Removable Media Slot  
 
DA - 11719 Worldwide — Version 6 — July 2, 2004  
Page 1  
QuickSpecs  
Standard Features  
HP Integrity rx5670 Server  
M inim um System  
One 64 bit Itanium 2 CPU: either 1.3 GHz/3 MB cache or 1.5 GHz/6 MB cache  
1 GB PC2100 ECC Registered DDR266A SDRAM (4×256MB DIMMs)  
One 24 DIMM slot memory carrier board  
Two power supplies  
Maximum Server  
C apacities  
Four 64 bit Itanium 2 CPUs: either 1.3 GHz/3 MB cache or 1.5 GHz/6 MB cache  
96 GB PC2100 ECC Registered DDR266A SDRAM (48×2GB DIMMs)  
Two 24 DIMM slot memory carrier boards (48 DIMM slots total)  
Three Hotswap power supplies, providing N+1 protection for power supplies and power input  
Ten PCI X or PCI I/O adapter cards  
One internal DVD ROM or DDS 3 drive  
Four internal hot plug LVD SCSI disks  
Standard System Features  
Three Operating System support: HP UX 11i version 2, Windows Advanced Server, and Linux  
Two Internal Ultra 160 LVD SCSI controllers w/dual channels; first controller supports one channel to an external  
port (U160 SCSI) and one channel to two internal HDDs (UltraWide SCSI), second controller supports one channel  
to internal HDDs (UltraWide SCSI) and one channel to internal tape or DVD bay (UltraNarrow SCSI). Please note:  
SCSI bus speed for the internal disk drives is 40MB/s, not the 160MB/s of the controller.  
10/100/1000Base TX LAN (with auto speed sensing; RJ 45 connector)  
Management Processor for remote management and HA monitoring  
Telnet and web console via 10/100Base TX management LAN (RJ 45 connector)  
Three RS 232 serial ports linked to the management processor (multiplexed from a single DB 25 port)  
Factory integration of CPUs, memory, disk drives, removable media, and I/O cards  
Rackmountable into 19 inch cabinets  
Optional stand alone pedestal mount  
Three year warranty with next business day on site  
H ig h A va ila b ility  
N+1 Hotswap cooling  
Two Hotswap power supplies-optional third power supply for N+1 protection  
On line memory page deallocation  
ECC protected DDR memory  
Memory chip spare to overcome single DRAM chip failures  
Dynamic Processor resilience and deallocation  
UPS power management  
Hot Plug internal disks  
Two independent Ultra SCSI buses to internal disks for mirroring across disks and controllers  
Journal file system with HP UX  
Auto reboot  
HP MC/ServiceGuard for HP UX  
Microsoft Windows Cluster Service  
HP ServiceGuard Extension for RAC for HP UX  
ServiceGuard Manager for HP UX  
Insight Manager 7-proactive fault management  
EMS HA Monitors for HP UX  
ECM Toolkit for HP UX  
HP Cluster Verification Tool for Windows cluster service monitoring  
HP Surestore AutoPath for HP UX  
MirrorDisk for HP UX  
Security  
Separate LAN for system management  
Password protection on console port  
Disablement of remote console ports  
SSL encryption on web console  
 
DA - 11719  
Worldwide — Version 6 — July 2, 2004  
Page 3  
QuickSpecs  
Standard Features  
HP Integrity rx5670 Server  
M anageability  
HP Ignite UX for installation and deployment of the operating system  
HP Software Distributor UX for software and patch management  
HP Servicecontrol Suite for HP UX  
HP TopTools for Windows and Linux  
Management processor for comprehensive remote management of HP UX, Windows, and Linux  
Process Resource Manager for HP UX workload management  
 
DA - 11719  
Worldwide — Version 6 — July 2, 2004  
Page 4  
QuickSpecs  
Configuration  
HP Integrity rx5670 Server  
C PU C onfiguration  
The HP Integrity rx5670 is a symmetrical multiprocessing (SMP) server supporting up to four high performance 64 bit  
Itanium 2 processors.  
Processor Details  
1.3 GHz or 1.5 GHz frequencies  
Level 3 Cache: 3 MB (1.3 GHz) or 6 MB (1.5 GHz)  
Level 2 Cache: 256 KB  
Level 1 Cache: 32 KB  
Single bit cache error correction  
50 bit physical addressing  
64 bit virtual addressing  
4 GB maximum page size  
C PU C onfiguration Rules  
M em ory Configuration  
CPUs can be installed one at a time  
CPUs must be installed in the following sequence: 0, 1, 2, 3  
1.3 GHz and 1.5 GHz CPUs cannot be mixed in the same system  
The HP Integrity rx5670 supports DDR (double data rate) SyncDRAM (synchronous dynamic random access memory) DIMMs  
with ECC and chip spare protection. The HP Integrity rx5670 supports up to two 24 DIMM memory carrier boards, for a  
maximum of 48 DIMMs. Each memory carrier board connects to the memory controller via a 6.4 GB/s memory bus. Peak  
memory bandwidth across both buses and both carrier boards is 12.8 GB/s.  
M em ory Loading Rules and Perform ance G uidelines  
Memory must be installed in groups of four DIMMs, also known as quads  
Each quad must consist of equal density DIMMs  
Memory can be ordered in quads of 1 GB (4×256MB), 2 GB (4×512MB), 4 GB (4×1GB), or 8 GB (4×2GB)  
Minimum memory is 1 GB (4×256MB)  
Maximum memory is 96 GB, using twelve 4 GB memory quads in both memory carrier boards  
Windows Server 2003 has a maximum memory configuration of 64 GB  
HP UX 11i version 2 and Linux have a maximum memory configuration of 96 GB  
Memory must be loaded in the order depicted on the memory carrier board  
Arrange DIMMs so that the quads with the largest capacity are in the lowest numbered slots.  
Each memory carrier board has its own 6.4 GB/s bus. Configure both memory carrier boards to maximize  
bandwidth and performance  
If both memory carrier boards are used, load memory equally across the carriers-alternate loading of DIMMs, in  
groups of four, between the two carriers.  
Racking C onfigurations  
There are two rail options, static or slider, available for racking the HP Integrity rx5670 into an HP cabinet. The slider rail  
enables the HP Integrity rx5670 to easily slide out of a cabinet for servicing. The slider occupies one additional EIA unit of  
rack space. The combination of an HP Integrity rx5670 and slider rail will consume eight EIA units of rack space. The slider  
also enables the hot swap of four fans in the side cavity. Slider rails are highly recommended.  
Static rails are also available. Static rails do not consume EIA space within the cabinet, therefore leaving more EIA space  
for peripherals. However, using static rails prohibits hot swap of the I/O bay fans. Static rails should only be used when  
cabinet vertical space prohibits the use of slider rails.  
If a rack is not required, the system can be placed in the standalone/deskside mount (A5525A).  
Anti-Tip Feet  
Bolt on anti tip feet are required when racking an HP Integrity rx5670 on a slider. Factory integrated cabinets will include  
bolt on feet with every cabinet by default. For cabinets that don't already have bolt on feet, order the bolt on anti tip feet  
(A5540A). Bolt on feet should always be used instead of the pull out foot stored in the cabinet base.  
 
DA - 11719  
Worldwide — Version 6 — July 2, 2004  
Page 5  
QuickSpecs  
Configuration  
HP Integrity rx5670 Server  
Cabinet Space  
Requirem ents  
The HP Integrity rx5670 requires a minimum of 24 inches (61 cm) of free space in both the front and rear of the cabinet for  
proper ventilation. During product installation and servicing, a total of 32 inches (82 cm) of free space is needed at the  
front of the cabinet.  
The depth of HP A490xA cabinets is 39 inches (99 cm). Therefore, a minimum of 87 inches (221 cm) of total space is  
needed for each cabinet during normal operation. An additional 8 inches (21 cm) is needed during installation and  
servicing.  
M axim um C onfigurations  
Multiple HP Integrity rx5670 systems can be installed into a HP cabinet. The maximum number of systems per  
cabinet is only limited by the cabinet EIA availability.  
A4900A – Quantity 3 HP Integrity rx5670 (with or without slider rails)  
A4901A – Quantity 4 HP Integrity rx5670 (with or without slider rails)  
A4902A – Quantity 5 HP Integrity rx5670 (with or without slider rails)  
Factory Racking  
HP factories can install multiple HP Integrity rx5670 systems into a single cabinet. In addition, multiple HP Integrity rx5670  
configurations can be ordered within a single cabinet. Order product A5580A for factory racking with static rails. Order  
product A5581A for factory racking with slider rails.  
Installation Into Third-  
Party C abinets/Racks  
The HP Integrity rx5670 supports the same non HP racks as the rp5470.  
 
DA - 11719  
Worldwide — Version 6 — July 2, 2004  
Page 6  
QuickSpecs  
Configuration  
HP Integrity rx5670 Server  
I/O Architecture  
The HP Integrity rx5670 I/O architecture utilizes industry standard PCI X and PCI buses in a unique design for maximum performance, scalability and  
reliability.  
The HP Integrity rx5670 architecture uses eight high speed I/O channels. Each channel provides 0.5 GB/s of sustained I/O throughput. The diagram above  
shows how these channels are used to provide bandwidth to the ten available PCI X and PCI slots as well as to the multifunction core I/O. Note that the  
rx5670 backplane has twelve I/O slots, however slots #1 and #3 (counting from the bottom) will always be filled with core I/O. Slot #2 will come factory  
loaded with a graphics and USB card if the HP Integrity rx5670 is ordered with the Windows operating system. The VGA/USB card is optional for systems  
ordered with HP UX or Linux.  
The three slots at the top of the backplane (#10, 11, and 12) all have their own dedicated 64 bit 133 MHz PCI X bus and their own independent 0.5 GB/s  
I/O channel. The highest performing I/O cards should be placed in these three slots. The independent channels provide improved I/O performance and  
error containment. Independence protects each I/O card from bus hangs or extended latencies due to the failure or high bandwidth demands of other I/O  
cards. Independence also ensures that each I/O card can achieve maximum throughput.  
The next six slots (4 through 9) share three 64 bit 66 MHz PCI X buses, with two slots allocated to each bus. Each pair of slots shares a 0.5 GB/s I/O  
channel. If a 33 MHz card shares a bus with a 66 MHz card, the faster card will downgrade to 33 MHz.  
Slot #3 is loaded with a Gigabit LAN/U160 SCSI core I/O card. Every rx5670 contains this card. A dedicated 64 bit 133 MHz PCI X bus and a dedicated  
0.5 GB/s I/O channel serve this slot.  
Slots #1 and #2 are also used for core I/O. Slot #1 always contains the Management Processor/U160 SCSI core I/O card. Slot #2 will be loaded with the  
graphics and USB card if a Windows operating system is ordered. Slot #2 is open if HP UX or Linux is ordered. The graphics and USB card is available as an  
option with HP UX and Linux, and it should always be placed in slot #1. If the graphics and USB card is not used, slot #1 can be used for other PCI I/O  
cards. Slot #1 always runs at 33 MHz.  
All I/O slots are keyed for 3.3V I/O cards. 5V cards are not supported in the HP Integrity rx5670.  
Number of  
Slots  
Bandwidth Per Slot  
0.5 GB/s  
Bus W idth  
Bus Speed  
Slot Keying  
Dedicated  
Shared  
3
6
64 bits  
64 bits  
133 MHz, 66 MHz or 33 MHz  
66 MHz or 33 MHz  
3.3 Volts  
3.3 Volts  
0.5 GB/s per pair of slots (three  
pairs)  
LAN/SCSI Core  
Management/SCSI Core  
VGA/USB1  
1
1
1
0.5 GB/s  
64 bits  
64 bits  
64 bits  
133 MHz  
33 MHz  
33 MHz  
3.3 Volts  
3.3 Volts  
3.3 Volts  
0.5 GB/s shared with VGA/USB  
512 MB/s shared with  
Management/SCSI Core  
 
DA - 11719 Worldwide — Version 6 — July 2, 2004  
Page 7  
QuickSpecs  
Configuration  
HP Integrity rx5670 Server  
Supported I/O Cards  
I/O Card  
Product Number  
Connector  
Type(s)  
HP-UX  
Yes  
W indows  
No  
Linux  
No  
Boot Support  
Yes  
PCI 2 Gb/s Fibre Channel  
Adapter  
A6795A  
LC  
2-Gb Fibre Channel HBA  
2-Gb Fibre Channel HBA  
AB232A  
AB234A  
A6826A  
LC  
LC  
LC  
No  
No  
Yes  
Yes  
No  
No  
No  
Yes  
No  
No  
No  
No  
PCI-X Dual Channel 2GB Fibre  
Channel HBA  
Single-port U160 SCSI  
Dual-port U160 SCSI  
A6828A  
A6829A  
A7059A  
VHDCI  
VHDCI  
VHDCI  
Yes  
Yes  
No  
No  
No  
Yes  
No  
No  
Yes  
Yes  
Yes  
Yes  
Single-port U160 SCSI (Windows  
and Linux)  
Dual-port U160 SCSI (Windows  
and Linux)  
A7060A  
A9825A  
A9826A  
A9890A  
A5838A  
VHDCI  
VHDCI  
VHDCI  
VHDCI  
No  
No  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
No  
Smart Array 5302/128 MB 2-  
channel RAID Controller  
Smart Array 5304/256 MB 4-  
channel RAID Controller  
Smart Array 6402 U320 2-  
channel RAID Controller  
Dual-port 100Base-T/Dual port  
Ultra2 SCSI1  
VHDCI/  
RJ-45  
Ultra2 LVD SCSI1  
A5149A  
A5150A  
A6825A  
A6847A  
A7061A  
VHDCI  
VHDCI  
RJ-45  
Yes  
Yes  
Yes  
Yes  
No  
No  
No  
No  
No  
Yes  
No  
No  
No  
No  
Yes  
No  
No  
No  
No  
No  
Dual-port Ultra2 LVD SCSI1  
1000Base-TX (gigabit copper)  
1000Base-SX (gigabit fiber)  
Duplex SC  
RJ-45  
1000Base-TX (gigabit copper,  
Windows and Linux)  
1000Base-SX (gigabit fiber,  
Windows and Linux)  
A7073A  
Duplex SC  
No  
Yes  
Yes  
No  
10/100Base-TX  
A5230A  
A5506B  
RJ-45  
RJ-45  
Yes  
Yes  
No  
No  
No  
Yes  
No  
No  
4-port 100Base-TX Ethernet LAN  
Adapter  
PCI-X 2Gb Fibre  
Channel/1000Base-SX Combo  
Card  
A9782A  
A9784A  
2 LC  
Yes  
Yes  
No  
No  
No  
No  
Yes  
Yes  
PCI-X 2Gb Fibre  
Channel/1000Base-T Combo  
Card  
1 LC, 1 RJ-45  
FDDI Dual Attach Station LAN  
Adapter  
A3739B  
A5513A  
A5783A  
FDDI SC  
Duplex SC  
Yes  
Yes  
Yes  
No  
No  
No  
No  
No  
No  
No  
No  
No  
PCI ATM 155 Mbps MMF  
Adapter  
PCI Token Ring 4/16/100  
Adapter  
RJ-45 and DB-9  
8-port Terminal Multiplexer  
64-port Terminal Multiplexer  
HyperFabric 2 Fibre Adapter  
Graphics/USB  
J3592A  
J3593A  
A6386A  
A6869A  
J3525A  
RS-232  
RS-232 or RS-422  
LC Duplex  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
No  
No  
Yes  
No  
No  
No  
No  
Yes  
No  
No  
No  
No  
No  
No  
X.25/SDLC/FR dual port  
RS-530, RS-232,  
V.35, RS-449 or  
X.21  
 
DA - 11719 Worldwide — Version 6 — July 2, 2004  
Page 8  
QuickSpecs  
Configuration  
HP Integrity rx5670 Server  
1Ultra2 SCSI cards do not support boot or MC/Serviceguard.  
Special Note on the Sm art Arry 5302 and 5304 Sm art Array RAID controller  
The Smart Array controllers do not automatically rebuild the internal HDD array when a failed drive is replaced. HP expects to provide auto rebuild  
capability in Q4 2003. Until that time, customers can deploy one of the following workarounds:  
1. Reboot the server to begin the rebuild process after the failed drive is replaced.  
2. Connect the second channel to the other side of the disk backplane and utilize the Hot Spare feature of the Smart Array (this will require an additional  
HDD). See the Smart Array User Guide for more details on setting up the Hot Spare feature.  
3. Existing HP Server rx5670 customers currently using the NetRAID 2M card with Windows may continue to use their existing controller for internal RAID.  
The NetRAID 2M will automatically detect a failed drive when it is replaced and begins the rebuild process. This workaround is not available with Linux, as  
the NetRAID 2M card is not supported in the Linux operating system.  
Integrated M ulti-function The integrated multifunction I/O provides core I/O functionally and includes the management processor, which provides  
Core I/O  
remote management and high availability monitoring capabilities.  
10/100/1000Base T LAN with RJ 45 connector-Supports LAN boot for operating system installation  
External LVD Ultra160 SCSI (160 MB/s) port (Ultra160 is backward compatible with LVD Ultra2 and with SE SCSI)-  
Order the appropriate cable to connect to external peripherals, example: VH to HD cable  
Two internal dual-channel Ultra160 SCSI controllers. One channel per internal disk pair and one channel for the  
removable media bay.  
Integrated M anagem ent  
Processor Functionality  
Dedicated 10/100Base T LAN port for LAN console and embedded web console access  
DB 25 serial port-multiplexed (using W cable) into three RS 232 ports: local ASCII console, remote/modem console,  
and general purpose  
Password protected console ports  
Console mirroring between all local, modem, LAN, and web consoles  
Remote power up and power down control  
Configurable remote access control  
Event notification to system console-Provides connectivity, information, and support for HP UX tools (such as STM  
and EMS) to notify by email, pager and/or HP response centers.  
Interface to system monitoring and diagnostic hardware via an internal IC bus  
Secure Sockets Layer security on web console  
Internal D isk D rives  
The HP Integrity rx5670 supports up to four internal low profile or half height hot plug disk drives.  
Two Ultra160 SCSI controllers provide each disk drive pair with an independent SCSI channel  
Supported by MirrorDisk/UX across both disk drives and controllers  
Supports Smart Array 5302 and 5304 Ultra160 SCSI RAID with Windows and Linux operating system. Order internal  
Smart Array cables for the rx5670 (A9828A) to connect Smart Array card to internal drives  
36 GB 15K, 73 GB 15K, and 146 GB 10K hot plug disks are supported  
System Console  
C onfigurations  
The HP Integrity rx5670's integrated Management Processor provides five methods for console connections.  
SSL secured Web console accessible through the 10/100Base T management LAN  
Standard telnet connections accessible through the 10/100Base T management LAN  
Local VT100 or hpterm terminal, or VT100 or hpterm emulator via local RS 232 serial connection  
Remote VT100 or hpterm terminal, or VT100 or hpterm emulator via external modem  
VGA graphics console using the A6869A graphics card - supported on Windows, Linux, and HP UX  
 
DA - 11719  
Worldwide — Version 6 — July 2, 2004  
Page 9  
QuickSpecs  
Configuration  
HP Integrity rx5670 Server  
HP Integrity rx5670 Power The HP Integrity rx5670 provides a high level of integrated power protection:  
Subsystem  
N+1 redundant hotswap power supplies  
N+1 redundant AC power input protection with electrical phase isolation  
Power monitoring and control  
The HP Integrity rx5670 supports up to three hotswap power supplies for N+1 protection. Two supplies are shipped as  
standard and are required for correct system operation. The hotswap design allows for the online replacement of a power  
supply when N+1=3 supplies are configured in the server.  
The HP Integrity rx5670 provides an independent power input receptacle for each power supply. The independent design  
provides protection against losing the connection from a power cord or breaker. The HP Integrity rx5670 power cords should  
always be plugged into separate breakers when possible.  
The chart below displays the AC power needs of the HP Integrity rx5670 at various configurations. These power figures are  
based on actual measurements under typical server workloads, and are appropriate for power budgeting at customer  
installations. Theoretically, a maximum configuration can draw up to 2,089 Watts AC. Power consumption at the  
theoretical maximum is unlikely in typical server applications.  
HP Integrity rx5670 AC Power Requirem ents at Various C onfigurations  
CPUs  
DIMMs  
4
I/O Cards  
Volt Am ps  
510  
W atts, AC  
500  
Amps @ 115V  
Amps @ 230V  
1
1
1
2
2
2
4
4
4
4
2
6
4.4  
5.2  
6.0  
5.0  
5.9  
6.8  
6.2  
70.  
8.0  
8.5  
2.2  
2.6  
3.0  
2.5  
2.9  
3.4  
3.1  
3.5  
4.0  
4.2  
16  
32  
4
595  
583  
10  
2
690  
676  
575  
563  
16  
32  
4
6
673  
660  
10  
2
784  
768  
707  
693  
16  
32  
48  
6
803  
787  
10  
10  
914  
896  
971  
952  
 
DA - 11719 Worldwide — Version 6 — July 2, 2004  
Page 10  
QuickSpecs  
Technical Specifications  
HP Integrity rx5670 Server  
Server model number  
rx5670  
Server product numbers  
Server and one 1.3 GHz CPU  
Server and one 1.5 GHz CPU  
Number of Processors  
A6837B  
A6838B  
1-4  
Supported Processors  
1.3-G Hz Intel® Itanium ® 2 processor  
Cache  
3 MB  
Yes  
Floating Point Coprocessor  
included  
TPM estimate  
100 K  
(4 way configuration)  
1.5-G Hz Itanium 2 processor  
Cache  
6 MB  
Floating Point Coprocessor  
included  
Yes  
TPM estimate (4 way  
configuration)  
120 K  
System Memory  
Minimum memory  
1 GB  
Maximum memory capacity  
96 GB  
Internal D isks  
Max. disk mechanisms  
Max. disk capacity  
4
438 GB  
Standard Integrated I/O  
Ultra160 SCSI-LVD  
Yes  
Yes  
10/100/1000Base T  
(RJ 45 connector)  
RS 232 serial ports (multiplexed 3  
from DB 25 port)  
10/100Base T management  
port (RJ 45 connector)  
Yes  
I/O buses and slots  
Total PCI X and PCI Slots  
10  
3 133 MHz, 64 bit slots on 3 dedicated PCI X buses  
6 66 MHz, 64 bit slots distributed on 3 PCI X buses; 2 slots per bus  
1 33 MHz, 32 bit PCI slot; recommended for graphics card  
M aximum M ass Storage  
Host Bus Adapters (see  
supported I/O table)  
Ultra160 SCSI-LVD  
10  
Dual-port Ultra160 SCSI–LVD 10  
Dual port HVD/FWD SCSI  
10  
Smart Array Ultra160 SCSI  
RAID  
9 (only 1 for internal drives)  
2 Gb single port fibre channel 10  
 
DA - 11719 Worldwide — Version 6 — July 2, 2004  
Page 11  
QuickSpecs  
Technical Specifications  
HP Integrity rx5670 Server  
Maximum Network  
Interface Cards (see  
supported I/O table)  
1000Base SX  
1000Base TX  
10/100Base TX  
Dual port X.25  
10  
10  
10  
10  
Electrical C haracteristics AC Input power  
Hotswap Power supplies  
Redundant AC power inputs  
100 240V 50/60 Hz  
2 included, 3rd for N+1  
2 included, 3rd for N+1  
Typical current requirements at 5 A (shared across inputs)  
230V  
Typical maximum power  
dissipation  
952 Watts  
Theoretical maximum power  
dissipation  
2,089 Watts  
Power factor at full load  
0.98  
Typical Heat dissipation  
(BTUs/hour)  
3,250  
Maximum Heat dissipation  
(BTUs/hour)  
7,135  
Site Preparation  
Site planning and installation No  
included  
Depth (in/mm)  
30.5 in (774 mm)  
Width (in/mm)  
19 in (482 mm)  
Rack Height (EIA/in/mm)  
Pedestal Height (in/mm)  
Weight (lb/kg) Maximum  
7 U/12.25 in/322 mm  
14.5 in (368 mm)  
161 lb (73 kg)  
Environm ental  
C haracteristics  
Acoustics (operator/bystander) <7.5 Bels LwA  
at 77° F/25° C)  
Operating Temperature  
(up to 5000 ft/1524 m)1  
41° to 95° F (5° to 35° C)  
Non-operating Temperature  
-40° to 158° F (-40° to 70° C)  
Maximum rate of temperature 10° C/hour  
change  
Operating relative humidity  
15% to 80% RH non-condensing  
5% to 90% non-condensing  
Non-operating relative  
humidity  
Operating altitude above sea 1,0000 ft (3,000 m) maximum  
level  
Non-operating altitude above 1,5000 ft (4,600 m) maximum  
sea level  
1 Max operating temperature range up to 5000 ft. For higher altitudes de rate the max temperature by 2°C/1000 ft above 5000 ft.  
Regulatory Com pliance  
Electromagnetic  
Interference  
Safety  
Complies with FCC Rules and Regulations, Part 15 as a Class A digital device.  
Manufacturer's Declaration to EN55022 Level A, VCCI Registered, Class A, Korea RLL  
UL Listed, CSA Certified, TUV GS Mark compliant with EN 60950 and EN 41003  
 
DA - 11719 Worldwide — Version 6 — July 2, 2004  
Page 12  
QuickSpecs  
Technical Specifications  
HP Integrity rx5670 Server  
© Copyright 2003-2004 Hewlett-Packard Development Company, L.P.  
The information contained herein is subject to change without notice.  
Intel and Itanium are registered trademarks or trademarks of Intel Corporation in the U.S. and/or other countries.  
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein  
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.  
 
DA - 11719  
Worldwide — Version 6 — July 2, 2004  
Page 13  

Grizzly Saw G7211 User Manual
Guardian Technologies Air Cleaner GG1000 User Manual
Haier Washer XPB80 50 User Manual
Hamilton Beach Mixer 63225 User Manual
Harbor Freight Tools Lawn Mower 47336 User Manual
Heath Zenith Home Safety Product BL 1800 User Manual
HP Hewlett Packard Network Router E1459A User Manual
Humax Flat Panel Television LP32 TDR1 User Manual
Husqvarna Brush Cutter 524 L User Manual
Hypertec Mouse Accuratus 540 User Manual