HP Hewlett Packard Computer Monitor D8911 User Manual

hp 91  
D8911  
19-inch CRT monitor  
(18-inch viewable image)  
user’s guide  
 
1ꢀ  
0.26 mm dot pitch for  
excellent graphics  
Non-glare, anti-  
static screen  
Full scan screen  
that gives an  
edge-to-edge  
image  
On/Off Switch  
Status Indicator  
Image adjustment controls to operate  
on-screen display menus  
hpꢀ91ꢀ  
D8911ꢀ  
19-inchꢀColorꢀMonitorꢀ  
(18-inchꢀViewableꢀImage)ꢀ  
User’sꢀGuideꢀ  
 
HP 19” Color Monitor User’s Guide  
Important Safety Instructions  
Important Safety Instructions  
WARNING  
Forꢀyourꢀsafetyꢀalwaysꢀconnectꢀequipmentꢀtoꢀaꢀgroundedꢀwallꢀoutlet.ꢀ  
Alwaysꢀuseꢀaꢀpowerꢀcordꢀwithꢀaꢀproperlyꢀgroundedꢀplug,ꢀsuchꢀastheꢀoneꢀ  
providedꢀwithꢀtheꢀequipment,ꢀorꢀoneꢀinꢀcomplianceꢀwithꢀyourꢀnationalꢀ  
safetyꢀstandards.ꢀThisꢀequipmentꢀcanꢀbeꢀdisconnectedꢀfromꢀtheꢀpowerꢀ  
byꢀremovingꢀtheꢀpowerꢀcordꢀfromꢀtheꢀpowerꢀoutlet.ꢀThisꢀmeansꢀtheꢀ  
equipmentꢀmustꢀbeꢀlocatedꢀcloseꢀtoꢀanꢀeasilyꢀaccessibleꢀpowerꢀoutlet.ꢀ  
Toꢀavoidꢀelectricalshock,ꢀdonotꢀopenꢀthemonitor'sꢀcover.Thereꢀarenoꢀ  
user-serviceableꢀpartsꢀinside.ꢀOnlyꢀqualifiedꢀserviceꢀpersonnelꢀshouldꢀ  
serviceꢀtheseꢀparts.ꢀ  
Makeꢀsureꢀyourꢀcomputerꢀisꢀpoweredꢀoffꢀbeforeꢀconnectingꢀorꢀ  
disconnectingꢀaꢀdisplayꢀperipheral.ꢀ  
Working in  
Comfort  
Thank you for selecting HP monitor equipment.  
To optimize your comfort and productivity, it's important that you set  
up your work area correctly and use your HP equipment properly. With  
that in mind, we have developed some setup and user recommendations  
for you to follow based on established ergonomic principles.  
You can consult the online version of Working in Comfort preloaded on  
the hard disk of HP computers, or visit HP's Working in Comfort web  
site at:  
CAUTION  
The monitor is quite heavy (the weight is shown in the technical  
specifications). We recommend you ask the assistance of a second  
person when lifting or moving it.  
The lightning flash with arrowhead symbol, situated within an equilateral  
triangle, is intended to alert the user to the presence of uninsulated  
"dangerous voltage" which may be of sufficient magnitude to constitute  
a risk of electric shock.  
The exclamation point within an equilateral triangle is intended to alert  
the user to the presence of important operating and servicing  
instructions in the literature accompanying the appliance.  
!
2
English  
 
HP 19” Color Monitor User’s Guide  
What Your New Monitor Offers  
What Your New Monitor Offers  
Your HP monitor is a 19-inch (18.0-inch viewable image), high  
resolution, multi-synchronous color monitor. Multi-synchronous  
means that the monitor supports a range of video modes. It is  
optimized for use with all Hewlett-Packard computers.  
Your HP color monitor has the following features:  
A 19-inch flat square tube with a 18.0-inch viewable image.  
0.26mm dot pitch for excellent graphics and anti-static and anti-  
glare coating to minimize reflection.  
Support for Ultra VGA 1600 x 1200 at 75 Hz refresh rate.  
Image adjustment using on-screen display menus. Includes color  
adjustment to optimize the quality of the image.  
1
Monitor power management system (VESA standard) controlled  
from suitably equipped HP computers to automatically reduce the  
power consumption of the monitor. Complies with the Energy Star  
Computers Program initiated by US EPA2. As an ENERGY partner,  
HP has determined that this product meets the ENERGY STAR  
guidelines for energy efficiency3.  
Monitor Plug and Play capability (VESA DDC1/2B standard) that  
enables the monitor to identify itself to suitably equipped HP  
computers.  
Compliance with ISO 9241-3/-7/-8 ergonomic standards.  
Complies with MPRII and MPRIII level B guidelines for upper limits  
of electrostatic and magnetic field emissions from the Swedish  
National Board for Measurement and Testing.  
Your monitor complies with TCO99 requirements. (Refer to  
“TCO99 Ecology Energy Emission Ergonomics” on page 17).  
Your monitor is Blue Angel compliant. Its cathode ray tube does  
not contain cadmium.  
1.  
2.  
3.  
VESA is the Video Electronics Standards Association.  
The US EPA is the United States Environmental Protection Agency.  
ENERGY STAR is a US-registered service mark of the US EPA.  
English  
3
 
HP 19” Color Monitor User’s Guide  
Setting Up Your Monitor  
SettingꢀUpꢀYourꢀMonitorꢀ  
AttachingꢀtheꢀTiltꢀandꢀSwivelꢀBaseꢀ  
Your display has a tilt and swivel base. To fit the swivel base:  
1
Turn the monitor on its side (never on the screen). Identify the front  
of the base.  
2
3
Locate the slots in the underside of the monitor.  
Slide the base towards the front of the monitor until the locking tab  
on the base clicks into place.  
1
2
3
WhereꢀtoꢀPlaceꢀtheꢀMonitorꢀ  
Place your monitor on a flat sturdy surface. Ensure the operating site is  
free from excessive heat, moisture, dust and sources of electromagnetic  
fields. Sources of electromagnetic fields include transformers, motors,  
and other monitors. Avoid exposing the monitor to direct sunlight.  
4
English  
 
HP 19” Color Monitor User’s Guide  
Setting Up Your Monitor  
ConnectingꢀtheꢀCablesꢀ  
CAUTION  
Before you connect any cables or install your HP monitor, refer to the  
safety instructions at the beginning of this manual. Refer to the user  
manual which accompanies your computer and video adapter to  
ensure this equipment is correctly installed.  
1
2
3
1
2
Ensure your computer is switched off.  
Connect the video cable (it has a 15-pin plug) to the video outlet  
on your computer. Tighten the thumbscrews on the plug.  
3
4
Connect the power cord to the monitor.  
Plug the power cord into the power outlet.  
NOTE  
The location of your computer's video cable connector may be  
different to the one shown. Refer to the manual that came with your  
computer, if necessary.  
English  
5
 
HP 19” Color Monitor User’s Guide  
Using Your Monitor  
Using Your Monitor  
Menu Button  
Adjustment  
Buttons  
Exit Button  
Menu Items  
On-Screen Menu (OSD)  
1
2
Press the Menu button to activate the on-screen display (OSD).  
Use the Adjustment buttons to scroll to the menu item you require. To  
choose a menu item press the Menu button.  
3
To adjust the setting of your chosen menu item, use the Adjustment  
buttons. Your settings are automatically saved.  
4
Press the Exit button to exit the on-screen display.  
Refer to the table on the next page for a description of menu items.  
You can directly access the brightness  
and contrast  
menu by  
pressing the adjustment button which shows the brightness and  
contrast icon.  
NOTE  
Your monitor is automatically demagnetized each time it is switched on.  
This ensures color purity. To maintain color purity, we recommend that  
each week you switch the monitor off for at least 30 minutes.  
6
English  
 
HP 19” Color Monitor User’s Guide  
Using Your Monitor  
Use the table below to determine which menu item you require:  
Menu Item  
Brightness  
Use to Adjust...  
the brightness (image black level).  
Contrast  
H-Center  
H-Size  
the contrast (image white level).  
the horizontal position of the displayed image.  
the horizontal size of the displayed image.  
the vertical position of the displayed image.  
the vertical size of the displayed image.  
the size of the displayed image.  
V-Center  
V-Size  
Zoom  
Pincushion  
the vertical edges if they appear to curl inwards or  
outwards.  
Trapezoid  
the vertical edges if they do not appear to be parallel.  
the vertical edges if they appear to curl to the left or right.  
the vertical edges if they appear to tilt to the left or right.  
Pinbalance  
Parallelogram  
Rotation  
the displayed image if it appears to be rotated.  
the recommended color temperature setting (blue level).  
the color temperature of your monitor.  
6500  
Color  
Temperature  
the recommended color temperature setting (red level).  
unwanted magnetism that can result in color impurity.  
the effects of horizontal screen ripple.  
9300  
Degauss  
Moire  
Recall  
geometry settings preset at factory.  
Exit Exit  
to exit the on-screen display.  
English  
7
 
HP 19” Color Monitor User’s Guide  
Setting the Amount of Displayed Information  
SettingꢀtheꢀAmountꢀofꢀDisplayedꢀInformationꢀ  
It is recommended that you use a resolution of 1280 x 1024 at  
85 Hz. This gives easy-to-read characters, a large amount of displayed  
information and a flicker-free image.  
You can make adjustments to the displayed image which are  
automatically saved for the resolution you are using. For example, if you  
adjust your monitor when working in SVGA, those settings are saved for  
SVGA. If you then work in VGA and change the image settings, they are  
saved for VGA. The next time you switch back to SVGA your previous  
settings are used automatically.  
To find out which resolutions are supported by your monitor, refer to  
“What Video Modes are Supported” on page 9. To change the screen  
resolution, please refer to the manual that came with your computer or  
your operating system documentation.  
Your monitor has a Plug and Play capability (VESA DDC1/2B standard)  
which enables it to identify itself to suitably equipped HP computers.  
This will automatically give you the best refresh rate for the resolution  
that you have set. Also, by using the appropriate software (when  
available) you can adjust the monitor settings directly from your  
computer.  
8
English  
 
HP 19” Color Monitor User’s Guide  
Supported Video Modes  
Supported Video Modes  
Your monitor supports the video modes shown in the table below.  
Screen Resolution  
640 × 350  
Image Refresh Rate  
70 Hz  
640 × 400  
70 Hz  
640 × 480  
800 × 600  
1024 × 768  
1280 × 1024  
1600 × 1200  
75, 85 Hz  
75, 85 Hz  
75, 85 Hz,  
75, 85 Hz  
75 Hz  
CAUTION  
Selectingꢀaꢀvideoꢀmodeꢀonꢀyourꢀcomputerꢀwithꢀaꢀscreenꢀresolutionꢀ  
andꢀimageꢀrefreshꢀrateꢀcombinationꢀhigherꢀthanꢀ1600ꢀ× 1200ꢀatꢀ75ꢀHzꢀ  
canꢀdamageꢀyourꢀmonitor.ꢀSelectingꢀaꢀvideoꢀmodeꢀnotꢀsupportedꢀbyꢀ  
yourꢀmonitorꢀwillꢀcauseꢀyourꢀmonitorꢀscreenꢀtoꢀgoꢀblank.ꢀ  
MinimizingꢀEyeꢀStrainꢀ  
To avoid screen flicker and minimize eye strain, use the highest  
supported image refresh rate for the chosen resolution. IIt is  
recommended that you use a refresh rate of 85 Hz. The image  
refresh rate is the number of times per second that the image is  
refreshed.  
MinimizingꢀEnergyꢀConsumptionꢀ  
If your computer supports VESA monitor power management  
(available on many HP computers), you can minimize the power  
consumed by the monitor. There are two power saving modes:  
1
Suspend mode (uses less than 5W). In this mode, the monitor's  
front panel indicator light is amber.  
2
Active off mode (uses less than 5W). In this mode, the monitor's  
front panel indicator light is amber.  
To set these power saving modes, refer to the manual that came  
with your computer. If your screen is not displaying an  
image, check the front panel indicator light first as your  
monitor may be in a power saving mode.  
1.Suspend mode is activated when vertical sync is cut by the video controller.  
2.Active off mode is activated when both vertical and horizontal sync are cut by the video  
controller.  
English  
9
 
HP 19” Color Monitor User’s Guide  
Troubleshooting  
Troubleshooting  
Before calling Hewlett-Packard check the following items:  
No picture and LED is off.  
Check if monitor is switched ON.  
Check if power cord is properly connected.  
Check if electrical outlet is connected.  
Test if monitor works on another computer previously set to  
monitor’s supported resolution.  
No picture and LED is on.  
Check if monitor is not in power saving mode.  
Adjust contrast and brightness through the On-Screen Menu (OSD)  
using the control buttons.  
Check if computer is switched on.  
Check if video cable has no bent pins.  
Test if monitor works on another computer previously set to  
monitor’s supported resolution.  
Colors are not pure.  
Degauss your monitor  
Shut down your monitor and switch it on after 30 minutes.  
Picture is not centered.  
Adjust picture through the On-Screen Menu (OSD) using the control  
buttons.  
Picture is fuzzy.  
Use the Recall function.  
Reduce contrast through the On-Screen Menu (OSD) using the  
control buttons.  
Adjust moire reduction to zero.  
10  
English  
 
HP 19” Color Monitor User’s Guide  
Technical Specifications  
Technical Specifications  
Size  
19-inch flat square tube  
18.0-inch viewable image (353mm)  
Phosphorous  
Red, Green, Blue P22 (medium short  
persistence)  
PICTURE TUBE  
Dot pitch  
0.26mm (0,28mm)  
Face Plate  
Anti-glare, anti-static, screen coating  
0.7V p p analog RGB  
Video  
INPUT SIGNAL  
Synchronization  
Input Connector  
TTL level separate synchronization  
(negative/positive)  
15-pin mini D-SUB  
INTERFACE  
Horizontal  
Vertical  
30 to 95 kHz  
50 to 160 Hz  
SCANNING FREQUENCY  
366 x 273 mm 1mm maximum viewable size  
DISPLAY SIZE  
1600 x 1200 (75Hz)  
MAX RESOLUTION  
1280 x 1024 (85 Hz)  
RECOMMENDED  
RESOLUTION  
30 minutes to reach optimum performance level  
203 MHz  
WARM-UP TIME  
PIXEL CLOCK  
AC 100 to 240 V, 50 to 60Hz  
Current 1.5 A (1,5A)  
POWER SOURCE  
0°C to 40°C  
Temperature  
Humidity  
OPERATING  
ENVIRONMENT  
10% RH through 80% RH (without  
condensation)  
466 (H) × 460(W) × 470(D) mm (including pedestal)  
CABINET DIMENSIONS  
WEIGHT  
20Kg  
Tilt Angle  
- 5° to +12.5°  
45°  
TILT/SWIVEL STAND  
Swivel Angle  
English  
11  
 
HP 19” Color Monitor User’s Guide  
Care and Cleaning  
Care and Cleaning  
Do not place anything on top of the monitor. Doing so may block the  
monitor vents and cause damage to the monitor due to overheating. Do  
not let liquid get on or into the monitor. To maximize screen life and  
prevent damage to the picture tube (such as burned phosphor due to  
leaving the same image on the screen for a long time), it is  
recommended that you:  
Use the monitor power management system (on HP computers) or a  
screen saver program.  
Avoid setting contrast and brightness to their maximum levels for  
prolonged periods.  
If you do not have a power management system or a screen saver  
program, switch the monitor off or reduce the brightness and  
contrast to minimum levels when the monitor is not in use.  
Your monitor has an anti-glare, anti-static screen coating. To prevent  
damage to the monitor screen's coating, use a regular household glass  
cleaner when cleaning the screen. To clean the screen:  
1
Switch the monitor off and remove the power plug (pull out the plug,  
not the cable).  
2
Wet a soft cotton cloth with the cleaning solution and gently wipe the  
screen. Do not spray cleaner onto the screen because the cleaner may  
drip inside the monitor.  
3
Dry with a clean, soft cotton cloth. Do not use cleaning solutions  
containing fluoride, acids or alkalis.  
Environmental Information  
HP has a strong commitment toward the environment. Your HP monitor  
has been designed to respect the environment as much as possible.  
HP can also take back your old monitor for recycling when it reaches  
the end of its useful life. In fact, HP has a product take-back program in  
several countries. The collected equipment is sent to one of HP's  
recycling facilities in Europe or the USA. As many parts as possible are  
reused. The remainder is recycled. Special care is taken for batteries  
and other potentially toxic substances, which are reduced to non-  
harmful components through a special chemical process. If you require  
more details about HP's product take-back program, contact your  
dealer or your nearest HP Sales Office.  
12  
English  
 
HP 19” Color Monitor User’s Guide  
Hardware Warranty  
Hardware Warranty  
HPꢀGeneralꢀHardwareꢀWarrantyꢀ  
General  
This HP Monitor Hardware Warranty Statement gives you, the customer,  
express warranty rights from HP, the manufacturer.  
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND:  
THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO  
THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT  
OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY  
RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.  
THE LAWS OF YOUR COUNTRY MAY PROVIDE FOR DIFFERENT  
WARRANTY RIGHTS. IF SO, YOUR AUTHORIZED HP DEALER OR HP  
SALES AND SERVICE OFFICE CAN PROVIDE YOU WITH DETAILS.  
Warranty repair or replacement.  
Model  
Warranty Period  
Service provided  
D8911  
3 years - unless original end-user customer US and Canada: 3 years second next  
has otherwise agreed to a shorter period of business day on-site exchange (direct  
F
warranty at the time of purchase.  
replacement).  
Europe only: 3 years next business day  
on-site exchange (swap out).  
E
Rest of the world: On-site service for  
first year, and return to an HP or  
repair authorized center for the follow-  
ing two years.  
A
1 year.  
Japan: Return to HP or a repair autho-  
rized service center for one year.  
D
Hewlett-Packard (HP) warrants this monitor hardware product, or accessory  
against defects in materials and workmanship for the applicable warranty  
period stated above, commencing from the date of delivery of the product to  
the end-user customer.  
HP does not warrant that the HP hardware will operate uninterrupted or  
error free.  
If, during the product warranty period, HP is unable, within a reasonable  
time, to repair or replace your product to the condition as warranted, you will  
be entitled to a refund (in the amount of the product purchase price) upon  
prompt return of the product to your authorized HP dealer or other HP  
designate. Unless otherwise stated or agreed upon in writing with HP, all  
hardware components must be returned for refund with the entire system  
process unit. HP software is covered by the HP Software Product Limited  
Warranty located in your HP product manual. Unless otherwise stated, and to  
the extent permitted by local law, hardware products may contain  
remanufactured parts (equivalent to new in performance) or parts which  
may have been subject to prior incidental use. HP may repair or replace  
English  
13  
 
HP 19” Color Monitor User’s Guide  
Hardware Warranty  
hardware products (i) with products which are equivalent in performance to the  
products being repaired or replaced but which may have been subject to prior  
use, or (ii) with products which may contain remanufactured parts equivalent  
to new in performance or parts which may have been subject to prior incidental  
use.  
Proof of Purchase and Warranty Period  
In order to receive service or support for your hardware product for the  
warranty period, proof of the original purchase date of the product may be  
required in order to establish the delivery date of your product. If the delivery  
date is not available, either the purchase date or the manufacturer's date  
(located on the product) becomes the beginning of the warranty period.  
Limitation of Warranty  
Warranty does not apply to defects resulting from: (a) improper or inadequate  
maintenance or calibration; (b) software, interfacing, parts or supplies not  
supplied by HP; (c) unauthorized repair, maintenance, modification or misuse;  
(d) operation outside of the published operating specifications for the product;  
(e) improper site preparation or maintenance; or (f) such other exclusions as  
may be expressly set forth in this Warranty Statement.  
HP MAKES NO OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR  
ORAL, WITH RESPECT TO THIS PRODUCT.  
TO THE EXTENT ALLOWED BY APPLICABLE LOCAL LAW, ANY IMPLIED  
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY  
SET FORTH ABOVE.  
Limitation of Liability and Remedies  
TO THE EXTENT ALLOWED BY APPLICABLE LOCAL LAW, THE REMEDIES  
IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE  
REMEDIES. IN NO EVENT SHALL HP BE LIABLE FOR LOSS OF DATA OR  
FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGE, WHETHER BASED ON WARRANTY CONTRACT, TORT, OR ANY  
OTHER LEGAL THEORY.  
The foregoing limitation of liability shall not apply in the event that any HP  
product sold hereunder is determined by a court of competent jurisdiction to be  
defective and to have directly caused bodily injury, death, or property damage.  
To the extent allowed by applicable local law, HP's liability for property damage  
does not exceed the greater of $50,000 or the purchase price of the specific  
product that caused such damage.  
14  
English  
 
HP 19” Color Monitor User’s Guide  
Regulatory Information  
Regulatory Information  
DECLARATION OF CONFORMITY  
accordingꢀtoꢀISO/IECꢀGuideꢀ22ꢀandꢀENꢀ45014ꢀ  
Manufacturer's Name:  
HP France  
Manufacturer's Address:  
5, Avenue Raymond Chanas - EYBENS  
38053 GRENOBLE CEDEX 09 -FRANCE  
Declares, that the products:  
Product Name:  
19 -inch Color Monitor  
Model Number: D8911* (the “*” can be any alphanumeric character).  
Conform(s) to the following Product Specifications:  
SAFETY -International: IEC 60950:1991 + A1 + A2 +A3 +A4 / GB4943-1995  
-Europe: EN 60950:1992 + A1 + A2 +A3 +A4+A11  
ELECTRO MAGNETIC COMPATIBILITY  
-CISPR 22:1993+A1+A2 / EN 55022:1994 +A1+A2 Class B1)  
-EN 50082-1:1992  
IEC 801-2:1991 / prEN 55024-2:1992 - 4kV CD, 8kV AD  
IEC 801-3:1984  
- 3V/m  
IEC 801-4:1988 / prEN 55024-4:1993 - 1 kV Power Lines  
- IEC 61000-3-3:1994 / EN61000-3-3:1995  
- GB9254-1998  
- FCC Title 47 CFR, Part 15 class B1)  
- ICES-003, Issue 3  
- VCCI-B  
- AS/NZ 3548:1995  
Products bearing the CE marking(2) also comply with: IEC 61000-3-2:1995  
Those products comply with requirements of the following Directives and carry the CE marking accordingly: EMC Directive  
89/336/EEC and Low Voltage Directive 73/23/EEC, both amended by the Directive 93/68/EEC.  
1) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that may cause undesired  
operation.  
2) All products sold in the European Economic Area (EEA) bear the CE Marking.  
Grenoble, November 2000  
Didier CABERET  
Quality Manager  
For Compliance Information ONLY, contact:  
USA contact: Hewlett-Packard Company, Corporate Product Regulations Manager, 3000 Hanover  
Street, Palo Alto, CA 94304. (Phone (650) 857-1501).  
English  
15  
 
HP 19” Color Monitor User’s Guide  
Regulatory Information  
Notice for the USA: FCC Class B Statement  
Federal Communications Commission Radio Frequency Interference Statement Warning:  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the  
user is encouraged to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the distance between the equipment and the receiver.  
Connect the equipment to an outlet on a different circuit to the one the receiver is  
connected to.  
Consult your dealer or an experienced radio/TV technician for help.  
Hewlett-Packard's FCC Compliance Tests were conducted using HP-supported peripheral  
devices and HP shielded cables, such as those you receive with your system. Changes or  
modifications not expressly approved by Hewlett-Packard could void the user's authority  
to operate the equipment.  
SafetyꢀWarningꢀforꢀUSAꢀ  
If the power cord is not supplied with your monitor, select the proper power cord  
according to your national electric specifications.  
USA: use a UL listed SVT detachable power cord.  
Hewlett-Packard’s system certification tests were conducted with HP-supported  
peripheral devices and HP shielded cables, such as those you received with your system.  
Cables used with this computer must be properly shielded to comply with the  
requirements of the FCC.  
Changes or modifications not expressly approved by Hewlett-Packard could void the user’s authority to  
operate the equipment.  
NoticeꢀforꢀCanadaꢀ  
This Class “B” digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la Classe B est conforme a la norme NMB-003 du Canada.  
NoticeꢀforꢀKoreaꢀ  
16  
English  
 
HP 19” Color Monitor User’s Guide  
Regulatory Information  
TCOꢀ99ꢀ  
Congratulations! You have just purchased a TCO'99 approved and labelled product!  
Your choice has provided you with a product developed for professional use. Your  
purchase has also contributed to reducing the burden on the environment and also to  
the further development of environmentally adapted electronics products.  
Why do we have environmentally labelled computers?  
In many countries, environmental labelling has become an established method for  
encouraging the adaptation of goods and services to the environment. The main  
problem, as far as computers and other electronics equipment are concerned, is that  
environmentally harmful substances are used both in the products and during their  
manufacture. Since it is not so far possible to satisfactorily recycle the majority of  
electronics equipment, most of these potentially damaging substances sooner or later  
enter nature.  
There are also other characteristics of a computer, such as energy consumption levels,  
that are important from the viewpoints of both the work (internal) and natural  
(external) environments. Since all methods of electricity generation have a negative  
effect on the environment (e.g. acidic and climate-influencing emissions, radioactive  
waste), it is vital to save energy. Electronics equipment in offices is often left running  
continuously and thereby consumes a lot of energy.  
What does labelling involve?  
This product meets the requirements for the TCO'99 scheme which provides for  
international and environmental labelling of personal computers. The labelling scheme  
was developed as a joint effort by the TCO (The Swedish Confederation of Professional  
Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature  
Conservation) and Statens Energimyndighet (The Swedish National Energy  
Administration).  
Approval requirements cover a wide range of issues: environment, ergonomics,  
usability, emission of electric and magnetic fields, energy consumption and electrical  
and fire safety.  
The environmental demands impose restrictions on the presence and use of heavy  
metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated  
solvents, among other things. The product must be prepared for recycling and the  
manufacturer is obliged to have an environmental policy which must be adhered to in  
each country where the company implements its operational policy.  
The energy requirements include a demand that the computer and/or display, after a  
certain period of inactivity, shall reduce its power consumption to a lower level in one  
or more stages. The length of time to reactivate the computer shall be reasonable for  
the user.  
Labelled products must meet strict environmental demands, for example, in respect of  
the reduction of electric and magnetic fields, physical and visual ergonomics and good  
usability.  
English  
17  
 
HP 19” Color Monitor User’s Guide  
Regulatory Information  
Below you will find a brief summary of the environmental requirements met by this  
product. The complete environmental criteria document may be ordered from:  
TCO Development  
SE-114 94 Stockholm, Sweden  
Fax: +46 8 782 92 07  
Email (Internet): [email protected]  
Current information regarding TCO'99 approved and labelled products may also be  
Environmental requirements  
Flame retardants  
Flame retardants are present in printed circuit boards, cables, wires, casings and  
housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of  
the plastic in a computer casing can consist of flame retardant substances. Most flame  
retardants contain bromine or chloride, and those flame retardants are chemically related  
to another group of environmental toxins, PCBs. Both the flame retardants containing  
bromine or chloride and the PCBs are suspected of giving rise to severe health effects,  
including reproductive damage in fish-eating birds and mammals, due to the bio-  
accumulative1 processes. Flame retardants have been found in human blood and  
researchers fear that disturbances in foetus development may occur.  
The relevant TCO'99 demand requires that plastic components weighing more than 25  
grams must not contain flame retardants with organically bound bromine or chlorine.  
Flame retardants are allowed in the printed circuit boards since no substitutes are  
available.  
Cadmium2  
Cadmium is present in rechargeable batteries and in the colour-generating layers of  
certain computer displays. Cadmium damages the nervous system and is toxic in high  
doses. The relevant TCO'99 requirement states that batteries, the colour-generating  
layers of display screens and the electrical or electronics components must not contain  
any cadmium.  
Mercury2  
Mercury is sometimes found in batteries, relays and switches. It damages the nervous  
system and is toxic in high doses. The relevant TCO'99 requirement states that batteries  
may not contain any mercury. It also demands that mercury is not present in any of the  
electrical or electronics components associated with the labelled unit.  
CFCs (freons)  
The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used  
during the manufacture and assembly of the product. CFCs (freons) are sometimes used  
for washing printed circuit boards. CFCs break down ozone and thereby damage the  
ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light  
with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.  
Lead2  
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages  
the nervous system and in higher doses, causes lead poisoning. The relevant TCO´99  
requirement permits the inclusion of lead since no replacement has yet been developed.  
1.Bio-accumulative is defined as substances which accumulate within living organisms  
2.Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.  
18  
English  
 
 
 

Grizzly Impact Driver G5346 User Manual
Haier Washer Automatic Drum Washing Machine User Manual
HANNspree Flat Panel Television MAK 000019 User Manual
Harman Kardon Universal Remote TC30 User Manual
Honeywell Thermostat CT31 User Manual
Hotpoint Oven 6142 User Manual
HP Hewlett Packard Computer Drive MSA50 User Manual
Huawei Network Router WS322 User Manual
Husqvarna Blower 115 149727 R01 User Manual
Husqvarna Chainsaw 966976701 User Manual