8x75x625GWWB or 8x75x625SWWB
RAZOR SHARP EDGEMAKING SYSTEM
CAUTION!: ALWAYS USE
ANSI COMPLIANT EYE
PROTECTION and NEVER! - TURN
THE CUTTING EDGE INTO EITHER
YES
NO!
Brought to you by:
WHEEL
.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS ABOUT THIS
PRODUCT, PLEASE CONTACT THE MANUFACTURER,
TOLL FREE: 1-866-419-4879, FAX: 1-707-459-1541
E-MAIL: [email protected]
Phone: (800) 523-4777
Fax: (800) 438-5901
MANUFACTURED IN THE USA AND FULLY WARRANTED BY:
Razor Sharp Edgemaking System
26195 Otter DR
This wheel is a replacement wheel (either gritted or slotted) for the eight
inch Razor Sharp Edgemaking System. It will put a polished razor sharp
edge on your knives and tools in just seconds.
Willits, CA 95490-8046, USA
Gritted Wheel is Grizzly Part #G5938
Slotted Wheel is Grizzly Part #G5939
THE WARRANTY ON THIS PRODUCT IS COMPLETELY
UNCONDITIONAL AND FREE OF “RED TAPE”!
Should you find a manufacturing defect with one of our wheels
we will replace it free of charge or refund your purchase price,
including shipping.
THE WHEEL IN THIS PACKAGE IS EIGHT INCHES BY THREE-
QUARTERS OF AN INCH WITH A FIVE EIGHTHS-INCH ARBOR HOLE.
The installed bushing converts it to a one-half inch arbor hole. Simply
remove the bushing for use on a five-eighths inch arbor.
CALL TOLL FREE: 1-866-419-4879
or 1-877-725-2197
This eight inch wheel is intended for use on a six inch buffer or bench
grinder, turning at least 3,000 RPMs. You will sharpen many knives be-
fore needing to re-surface the grit wheel. The slotted wheel needs to be
“dressed” occasionally with 60 grit sandpaper.
PLEASE READ THE INSTRUCTIONS!
Including the safety instructions on page four.
RECOMMENDED SPEED 3000 - 3600 RPM
RECOMMENDED SPEED 3000 - 3600 RPM
Page Four
Page One
07/12/2010
|