Greenheck Fan Fan MSCF BI User Manual

Part #462888  
Modular Small Cabinet Fan  
®
Installation, Operation and Maintenance Manual  
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the  
product described. Protect yourself and others by observing all safety information. Failure to comply with instructions  
could result in personal injury and/or property damage! Retain instructions for future reference.  
Model MSCF-BI  
Model MSCF-FC  
General Safety Information  
Only qualified personnel should install this unit.  
Personnel should have a clear understanding of these  
instructions and should be aware of general safety  
precautions. Improper installation can result in electric  
shock, possible injury due to coming in contact with  
moving parts, as well as other potential hazards.  
Other considerations may be required if high winds  
or seismic activity are present. If more information  
is needed, contact a licensed professional engineer  
before moving forward.  
2. The rotation of the wheel is critical. It must be  
free to rotate without striking or rubbing any  
stationary objects.  
3. Motor must be securely and adequately  
grounded.  
4. Do not spin fan wheel faster than the maximum  
cataloged fan rpm. Adjustments to fan speed  
significantly affects motor load. If the fan RPM is  
changed, the motor current should be checked  
to make sure it is not exceeding the motor  
nameplate amps.  
5. Do not allow the power cable to kink or come  
in contact with oil, grease, hot surfaces,  
or chemicals. Replace cord immediately if  
damaged.  
1. Follow all local electrical and safety codes, as  
well as the National Electrical Code (NEC), the  
National Fire Protection Agency (NFPA), where  
applicable. Follow the Canadian Electric Code  
(CEC) in Canada.  
6. Verify that the power source is compatible with  
the equipment.  
DANGER  
7. Never open blower access doors while the fan is  
running.  
Always disconnect power before working on or  
near a unit. Lock and tag the disconnect switch or  
breaker to prevent accidental power up.  
CAUTION  
When servicing the unit, motor may be hot enough  
to cause pain or injury. Allow motor to cool before  
servicing.  
Model MSCF Modular Small Cabinet Fan  
 
1
®
Table of Contents  
Installation  
Installation  
Unit Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Mounting / Hanging Instructions . . . . . . . . . . . . . 4  
Mounting Dimensions. . . . . . . . . . . . . . . . . . . . . . 5  
Dimensions / Weights. . . . . . . . . . . . . . . . . . . . . . 6  
Filter Sizes / Quantity . . . . . . . . . . . . . . . . . . . . . . 6  
Coil Dimensions . . . . . . . . . . . . . . . . . . . . . . . . .7-9  
Start-Up  
Electric Heater. . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Operation  
Electric Heater. . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Maintenance  
Fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Coil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Drain Pan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Reference  
Start-Up Documentation. . . . . . . . . . . . . . . . . . . 17  
Maintenance Log . . . . . . . . . . . . . . . . . . . . . .18-19  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . .Backcover  
System Start-Up . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Troubleshooting  
Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Motor Overamps . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Insufficient / Too Much Airflow. . . . . . . . . . . . . . 10  
Excessive Noise or Vibration . . . . . . . . . . . . . . . 10  
Start-Up  
Coil Module . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13  
Drain Pan / Drain Trap . . . . . . . . . . . . . . . . . . . . 13  
Unit Layout  
Airflow  
4
7
2
8
8
8
8
8
6
8
5
3
9
1
1. Fan and Cabinet Section  
6. Mixing Box Section  
7. Lifting Lugs  
2. Cooling Section  
• Chilled Water  
• DX Coils  
Four (4) lifting lugs for each section  
8. Side Access Panels  
3. Heating Section  
• Hot Water  
Right and left access to each section  
(image shows panels removed)  
• Steam Coils  
9. 7/8-inch knockout is provided for the  
recommended electrical wiring penetration or  
disconnect switch.  
4. Filter Section  
Filter may be mounted in Mixing Box Section  
5. Plenum Section  
Model MSCF Modular Small Cabinet Fan  
 
3
®
Mounting Instructions  
Hanging Instructions  
Greenheck’s Modular Small Cabinet Fan (MSCF)  
should be lifted by the factory supplied lifting lugs  
(see Figure 1) or frame rails and a spreader bar  
(see Figure 2) to prevent damage from occurring to  
the equipment. Avoid twisting or uneven lifting of  
equipment. Do not lift equipment by coil connections  
or headers. The unit must remain upright during lifting.  
All access doors and panels must be closed during  
lifting to avoid damage.  
The MSCF should be hung by the factory supplied  
lifting lugs or field supplied frame rails as shown  
respectively in Figures 3 and 4. The number of  
hanging brackets used will be determined by the  
number of fan modules.  
Spreader Bar  
Figure 3  
Lifting lugs  
Figure 1  
Figure 4  
Spreader Bar  
External Mounting Isolation  
The MSCF is available with external neoprene or  
spring isolation options. When external isolation is  
selected, a bridge bracket will be provided to reduce  
installation time (see Figure 5).  
3/8-16x3/4 Spinlock Bolt  
Two required per assembly  
3/4 inch Flat Washer  
One per assembly as needed  
3/8-16 Spinlock Nut  
Two required per assembly  
Bridge Bracket  
Part No. 711779  
Drawing No. 89814  
One required per assembly  
Frame Rails  
(by others)  
Hanging Bracket  
Part No. 710774  
Drawing No. 85537  
Hanging Bracket  
Part No. 710774  
Figure 2  
Drawing No. 85537  
3/8-16x3/4 Spinlock Bolt  
Two required per assembly  
HANGING ASSEMBLY  
Bridge Bracket  
Part No. 711779  
Drawing No. 89814  
One required per assembly  
3.0 inch  
3/4 inch Flat Washer  
One required per assembly  
Figure 5  
3/8-16 Spinlock Nut  
Two required per assembly  
BASE ASSEMBLY  
Model MSCF Modular Small Cabinet Fan  
 
4
®
Modular Construction  
The MSCF is designed to be modular so it can be  
mounted as an assembly or as individual sections  
when the appropriate lifting equipment is not  
available.  
MSCF Mounting Dimensions  
K
J
L
F
A
B
C
D
E
G
H
M
Mixing  
Box  
24 in.  
Plenum  
12 in.  
Plenum  
Filter  
*Heating  
Cooling / Combo  
Coil  
Fan  
Horizontal Hanging  
E
A
D
Unit  
Size  
B
C
F
G
H
J
K
L
M
w/o  
w/  
Hot Water 4 Row HW  
Vertical Sloped  
Filter Filter  
1 & 2 Row & Steam  
15  
20  
25  
30  
45  
50  
65  
85  
6.75  
6.75  
6.75  
6.75  
6.75  
6.75  
6.75  
6.75  
18.5 18.5 6.75  
18.5 18.5 6.75  
6.75  
6.75  
6.75  
6.75  
6.75  
6.75  
6.75  
6.75  
18.5  
18.5  
21  
6.75  
6.75  
6.75  
6.75  
6.75  
6.75  
6.75  
6.75  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
9.5  
18.5  
18.5  
18.5  
18.5  
18.5  
18.5  
18.5  
18.5  
19  
19  
23  
26  
26  
32  
36  
36  
38  
38  
38  
38  
50  
50  
50  
62  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
2.5  
3
3
3
3
3
3
3
3
.5  
.5  
.5  
.5  
.5  
.5  
.5  
.5  
43  
43  
43  
43  
55  
55  
55  
67  
21  
25  
26  
26  
32  
32  
18.5 6.75  
18.5 6.75  
18.5 6.75  
18.5 6.75  
18.5 6.75  
18.5 6.75  
25  
26  
26  
28  
28  
*See CAPS for electric heating dimensions.  
All dimensions are in inches.  
Model MSCF Modular Small Cabinet Fan  
 
5
®