Electro Voice Speaker System HP94 User Manual

HP94  
TransPlanar™  
Constant-Directivity  
Horn  
General Product Description  
The Electro-Voice® model HP94 is a wide-range,  
flat-front, high-frequency, constant-directivity horn. The  
horizontal angle is controlled over a frequency range  
of 1.2 kHz to 20 kHz and the vertical angle is controlled  
from 2.1 kHz to 20 kHz, both with unusual precision  
and adherence to the intended angle. Furthermore,  
excellent loading is maintained to a low frequency of  
1000 Hz.  
The flat-front design makes the HP94 suitable for all  
modern boxed and clustered systems.A special vaned  
waveguide throat detail gives the HP94 unusually good  
high-frequency control, vertically, when compared to  
similar 2-inch-throat horn designs.  
Architects’ and Engineers’ Specifications  
shall be integrally laminated into the fiberglass portion  
of the horn.  
The horn shall be of the constant-directivity type.It shall  
produce a horizontal beamwidth (6 dB-down angle) of  
90 degrees, deviating no more that 30 degrees from  
this angle over the frequency range 1,200 to 20,000  
Hz. It shall produce a vertical beamwidth of 40 degrees,  
deviating no more than 20 degrees from this angle over  
the frequency range 2,100 to 20,000 Hz. In addition, it  
shall provide useful acoustic loading at all frequencies  
above 1000 Hz.  
The horn shall possess a throat of 4.92-cm (1.94in.)  
diameter and its flange shall be provided with four ¼-20  
clearance bolt holes on a 10.2 cm (4.0 in.) circle for the  
mounting of the compression driver. The horn shall be  
27.9 cm (11.0 in.) high, 22.2 cm (8.8 in.) wide, and  
22.2 cm (8.7 in.) long. It shall weigh no more than 2.5  
kg (4.5 lb).  
The horn shall be of hybrid fiberglass-and-zinc  
construction. The driver-mounting flange and initial  
throat section shall be constructed of die-cast zinc and  
The horn shall be the Electro-Voice model HP94  
constant-directivity horn.  
Specifications:  
Construction:  
The following specifications are in accordance with or  
exceed the AES Recommended Practice for  
Specification of Loudspeaker Components Used in  
Professional Audio and Sound Reinforcement  
(AES2-1984; ANSI S4.26-1984).  
Polyester resin and glass-fiber laminate integrally  
molded to a die-cast zinc throat section. This hybrid  
construction assures a rigid driver mount, accurate,  
loss-free throat-wave transmission and low total weight  
compared to horns of similar size.  
Horizontal Beamwidth:  
Mechanical Connection of Driver:  
90° (+30°, -10°) (-6 dB 1.2 kHz to 20 kHz)  
Vertical Beamwidth:  
Bolt on; standard 2" diameter throat, 5" diameter  
mounting flange and four clearance holes for ¼" bolts  
on a 4" diameter bolt circle.  
40° (+20°, -10°) (-6 dB, 2.1 kHz to 20 kHz)  
Directivity Factor Rθ (Q):  
Recommended Driver:  
DH1A, DH2A  
Weight:  
18.1 (average 1.6 kHz to 20 kHz)  
Directivity Index Di:  
10.1 dB (+1.9, -0.9 dB)  
10 log Rθ, (average 1.6 kHz to 20 kHz)  
2.5 kg (4.5 lb)  
Lowest Recommended Crossover Frequency:  
1000 Hz  
 

Cooper Lighting Indoor Furnishings CGP500WL WQ500 User Manual
Craftsman Garage Door Opener 13918451D User Manual
Craftsman Lawn Aerator 48624219 User Manual
Craftsman Lawn Mower 91738514 User Manual
Curtis Digital Photo Frame DPF771 User Manual
Danby Freezer DCF700W1 User Manual
Delta Electronics Network Card SPBD 1250B4Q1RT User Manual
Dimension One Spas Hot Tub Lotus Bay User Manual
Gateway Computer Monitor VX750 User Manual
Gateway Home Theater Server 901 Series User Manual