Legal information .............................................. 3
Diverting calls ................................................. 29
Call list ........................................................... 26
Speed dialling ................................................. 26
Voicemail ....................................................... 26
Pictures .......................................................... 48
Radio ............................................................. 49
Composing melodies ....................................... 50
This is the Internet version of the user's guide. © Print only for private use.
1
Introduction
Legal information
Sony Ericsson
Introduction
In this part of the user guide you find a table of contents which
offers a general outline of the guide. To find more specific
information about your phone´s functionality, please refer to the
index at the back of the user guide.
UMTS-GSM 900/1800/1900
First edition (April 2005)
This user guide is published by Sony Ericsson Mobile
Communications AB, without any warranty. Improvements and
changes to this user guide necessitated by typographical errors,
inaccuracies of current information, or improvements to programs
and/or equipment, may be made by Sony Ericsson Mobile
Communications AB at any time and without notice. Such
changes will, however, be incorporated into new editions of this
user guide.
You will also find information about what is included in the box
when you unpack your phone.
Congratulations
Congratulations and thank you for choosing the Sony Ericsson
V600i (customized for Vodafone live!).
All rights reserved.
©Sony Ericsson Mobile Communications AB, 2005
Publication number: EN/LZT 108 7766 R1A
Please note:
We hope that you will be pleased with this new 3G phone. It will
bring you the best of mobile telephony, including faster 3G access
to Vodafone live!, video calling, video messaging, video and
music clip download (saved to your phone or streamed to your
phone to view now).
Some of the services in this user guide are not supported by all
networks. This also applies to the GSM International Emergency
Number 112.
Please contact your network operator or service provider if you
are in doubt whether you can use a particular service or not.
Please read the Guidelines for safe and efficient use and the
Limited warranty chapters before you use your mobile phone.
This is the Internet version of the user's guide. © Print only for private use.
3
Introduction
Your mobile phone has the capability to download, store and
forward additional content, e.g. ringtones. The use of such
content may be restricted or prohibited by rights of third parties,
including but not limited to restriction under applicable copyright
laws. You, and not Sony Ericsson, are entirely responsible for
additional content that you download to or forward from your
mobile phone. Prior to your use of any additional content, please
verify that your intended use is properly licensed or is otherwise
authorized. Sony Ericsson does not guarantee the accuracy,
integrity or quality of any additional content or any other third
party content. Under no circumstances will Sony Ericsson be
liable in any way for your improper use of additional content
or other third party content.
Mac OS is a trademark of Apple Computer, Inc., registered
in the U.S. and other countries.
T9™ Text Input is a trademark or a registered trademark
of Tegic Communications.
T9™ Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928,
and 6,011,554; Canadian Pat. No. 1,331,057, United Kingdom
Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro.Pat. No. 0 842
463(96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and
additional patents are pending worldwide.
Java and all Java based trademarks and logos are trademarks
or registered trademarks of Sun Microsystems, Inc. in the U.S.
and other countries.
The Bluetooth word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Sony Ericsson is under
license.
End-user license agreement for Sun™ Java™ J2ME™.
3GPP is a trademark of ETSI in France and other jurisdictions.
1. Restrictions: Software is confidential copyrighted information
of Sun and title to all copies is retained by Sun and/or its
licensors. Customer shall not modify, decompile, disassemble,
decrypt, extract, or otherwise reverse engineer Software.
Software may not be leased, assigned, or sublicensed,
in whole or in part.
2. Export Regulations: Software, including technical data, is
subject to U.S. export control laws, including the U.S. Export
Administration Act and its associated regulations, and may
be subject to export or import regulations in other countries.
Customer agrees to comply strictly with all such regulations
QuickShare™, MusicDJ™, PhotoDJ™ and VideoDJ™ are
trademarks or registered trademarks of Sony Ericsson Mobile
Communications AB.
Real is a trademark or a registered trademark of RealNetworks,
Inc.
Microsoft, Windows and PowerPoint are either registered
trademarks or trademarks of Microsoft Corporation in the
U.S and other countries.
4
This is the Internet version of the user's guide. © Print only for private use.
Introduction
and acknowledges that it has the responsibility to obtain
licenses to export, re-export, or import Software. Software
may not be downloaded, or otherwise exported or re-exported
(i) into, or to a national or resident of, Cuba, Iraq, Iran, North
Korea, Libya, Sudan, Syria (as such listing may be revised
from time to time) or any country to which the U.S. has
embargoed goods; or (ii) to anyone on the U.S. Treasury
Department's list of Specially Designated Nations or the U.S.
Commerce Department's Table of Denial Orders.
Instruction symbols
The following instruction symbols appear in this user guide:
} Use the selection keys or the navigation key to scroll and
select.
% See also page ...
3. Restricted Rights: Use, duplication or disclosure by the
United States government is subject to the restrictions as set
forth in the Rights in Technical Data and Computer Software
Clauses in DFARS 252.227-7013(c) (1) (ii) and FAR 52.227-
19(c) (2) as applicable.
Part of the software in this product is copyright © SyncML
initiative Ltd. (1999-2002). All rights reserved.
Please also see %12 Keys and navigation for more useful
information.
Contains Macromedia® Flash™ technology by Macromedia,
Inc. Copyright © 1995-2003 Macromedia, Inc. All rights
reserved.
Macromedia, Flash, Macromedia Flash, and Macromedia Flash
Lite are trademarks or registered trademarks of Macromedia,
Inc. in the United States and other countries.
Other product and company names mentioned herein may be
the trademarks of their respective owners.
Any rights not expressly granted herein are reserved.
This is the Internet version of the user's guide. © Print only for private use.
5
Introduction
%10 Getting started for information on how to assemble and
start using your phone.
What’s in the box
In the box you will find:
• a phone
• a standard battery
• a charger
• a USB cable
• a portable stereo handsfree headset
• a CD including PC software
• a Vodafone live! Quick start guide
• a user guide (you are reading it now)
6
This is the Internet version of the user's guide. © Print only for private use.
Basics
Basics
This chapter gives you the basics for getting started with your
phone. You’ll learn how to assemble and turn on your phone,
and then you can use the setup wizard to quickly set up your
phone.
You’ll learn how to use call functions such as making voice
or video call, how to use contacts and how to enter text.
There’s also a quick overview of the parts of your phone, the
main functions of the keys, and what’s available in the menus.
This is the Internet version of the user's guide. © Print only for private use.
7
Basics
Phone overview
Getting to know your phone
1
Infrared port
9
1
2
10
2
Ear speaker
3
4
5
USB port
Screen
Video call key
3
4
11
6, 13
7
Selection keys
Back key
8
Photo light key
Power on/off button
Video call camera
Camera zoom, volume buttons
Vodafone live!
Navigation key
Clear key
12
5
6
7
9
13
14
15
16
10
11
12
14
15
16
17
18
19
17
8
Camera button
Silent key
Microphone
Stereo headset and charger connector
18
19
For more information on keys and navigation, %12 Keys and
navigation.
8
This is the Internet version of the user's guide. © Print only for private use.
Basics
Menu overview
1. Entertainment
Games
6. My Items
8. Contacts
Options:
12. Settings
General
Profiles
Time & date
Language
Voice control
New events
Phone status
Shortcuts
Start-up menu
Locks
Setup wizard
Tips and tricks
Master reset
Display
Wallpaper
Themes
Start-up screen
Screen saver
Brightness
Sleep mode clock
Edit line names**
Pictures
VideoDJ™
Videos
Speed dial
PhotoDJ™
MusicDJ™
Record sound
2. Vodafone live!*
3. Media Player
4. Camera
5. Messaging
Create new
Inbox
Drafts
Outbox
Sent messages
Messenger
Call voicemail
Email
Saved messages
Templates
Media Album
Settings
Sounds
Contacts
My business card
Groups
SIM contacts
Special numbers
Advanced
New contact
9. Online services**/
Alarms
10. Radio
11. Calls
Themes
Web pages
Games
Applications
Other
Calls
Divert calls
Switch to line 1/Switch to line 2**
Manage calls
Time & cost
Show or hide no.
Handsfree
7. Organiser & Tools
Online services**
Applications
Alarm
Calendar
Tasks
Sounds & alerts
Ring volume
Ringtone
Silent mode
Increasing ring
Vibrating alert
Message alert
Key sound
Notes
Light
Remote control
Timer
Connectivity
Bluetooth
Infrared port
Synchronization
Device mgmt.
Mobile networks
Data comm.
Stopwatch
Calculator
Code memo
Internet settings
Streaming settings
Settings for Java™
Accessories
* Vodafone! live. Offline webpage with direct links to online services.
**This feature is not available in the handset for all countries.
This is the Internet version of the user's guide. © Print only for private use.
9
Basics
To insert SIM card and battery
Getting started
Assembling the phone
Before you can use your phone you need to:
• Insert the SIM card.
• Attach and charge the battery.
SIM card
When you register as a subscriber with your network operator,
you get a SIM (Subscriber Identity Module) card. The SIM card
contains a computer chip that keeps track of your phone number,
the services included in your subscription, and names and
numbers in your contacts, among other things.
Note: If you have been using a SIM card in another phone, make
sure that your information is saved to the SIM card before you
remove it from the other phone. For example, contacts may
have been saved in the phone memory.
1. Remove the battery cover by sliding the two catches on the
side of the phone and lifting it away as shown in the picture.
2. Slide the SIM card into its holder. Make sure that the gold
contacts of the SIM card are facing down, and the cut off
corner is correctly aligned.
3. Place the battery on the back of the phone with the label
side up and the connectors facing each other.
SIM card and battery information
Always turn off the phone and detach the charger before you
insert or remove a SIM card.
Note: It may take up to 30 minutes before the battery icon
appears when charging.
4. Place the battery cover as shown in the picture and slide
the two catches back into place.
10
This is the Internet version of the user's guide. © Print only for private use.
Basics
To charge the battery
PIN (Personal Identification Number)
You may need a PIN (Personal Identification Number) to activate
the services in your phone. The PIN is associated with your SIM
card, and not with the phone. Your PIN is provided by your
network operator. When you enter your PIN, each digit appears
as *, unless your PIN starts with the same digits as an
emergency number, for example 112. This is so that you can
see and call an emergency number without entering a PIN.
If you make a mistake while entering your PIN, delete the
number by pressing
.
card is blocked and the message PIN blocked appears. To
unblock it, you need to enter your PUK (Personal Unblocking
Key), %71 SIM card lock.
Available Services
Some services and functions described in this user guide are
network or subscription dependent. Because of this, all menus
may not be available in your phone. Please consult your network
operator for more information about your subscription.
1. Connect the charger to the phone. The symbol on the charger
plug must face upwards.
2. It may take up to 30 minutes before the battery icon appears
on the screen.
Turning on the phone and making calls
3. Wait approximately 4 hours or until the battery icon indicates
that the battery is fully charged. If you do not see the battery
icon after this time, press a key to activate the screen.
4. Remove the charger by tilting the plug upwards.
Make sure that the phone is charged and your SIM card is
inserted before you turn it on. When you have turned the phone
on, you can use the setup wizard to quickly and easily prepare
your phone for use.
This is the Internet version of the user's guide. © Print only for private use.
11
Basics
To turn on the phone
To make and receive calls
Enter the phone number (with international prefix and area
code if applicable) } Call to make the call, or press and hold
to make a video call. } End call to end the call. When
the phone rings } Answer.
Keys and navigation
From standby, press
to enter the main menu, where the
menus are shown as icons. Some submenus include tabs.
Scroll to a tab using the navigation key and select an option.
The standby screen is displayed when you are not calling or
using the menus. This is where you can see, for example, the
name of your operator, the time and the date. At the top of the
standby screen you find the status bar.
1. Press and hold
.
2. Enter your SIM card PIN, if requested.
3. At first start-up, select the language you want for your
phone menus.
4. } Yes if you want the setup wizard to help you get started,
and follow the instructions that appear. You can start the
wizard from the menu system at any time, } Settings } the
General tab } Setup wizard.
When in the menus, } More to enter a list of options. There
are different alternatives in the list of options depending on
where you are in the menus.
More information, explanations or tips about selected features,
menus or functions available in your phone. Scroll to a menu
item } Info.
12
This is the Internet version of the user's guide. © Print only for private use.
Basics
The status bar at the top of the screen contains icons, which
give information related to the phone and its activities,
%83 Icons shown in standby.
Press to open the activity menu,
%34 Activity menu.
Press to take a picture or to record
a video clip.
Press to enter the main menu from standby.
Press to select highlighted items.
Press and hold to call your voicemail service
(if set).
During a call, press to view a list of options.
Move through menus and tabs.
-
-
Press and hold any of these keys to reach
a contact beginning with a specific letter.
Press to select the options shown
immediately above these keys on the screen.
Press any of these keys and press Call
to speed dial.
Press to go back one level in the menus.
Press and hold to return to standby or end
a function.
In standby, press to view status information.
To reject a call, quickly press twice when
receiving a call.
Press to delete items, such as pictures,
sounds and contacts.
During a call, press and hold to mute the
microphone.
Press once to turn off the ringtone when
receiving a call.
During a call, press to increase the volume.
When using the media player (also when
minimized), press to increase the volume.
Press and hold to go back one track.
When using the camera, press to zoom in.
Press and hold to voice dial, alternatively say
your magic word (if set), %27 Voice dialling.
Press and hold to make a video call or to
enter video call mode.
This is the Internet version of the user's guide. © Print only for private use.
13
Basics
You can always choose language according to SIM by pressing
In standby, press to view status information.
To reject a call, quickly press twice when
receiving a call.
8888
in standby. You can always choose English by
0000 in standby.
pressing
Press once to turn off the ringtone when
receiving a call.
During a call, press to decrease the volume.
When using the media player (also when
minimized), press to decrease the volume.
Press and hold to go forward one track.
When using the camera, press to zoom out.
To change the phone language
1. } Settings } the General tab } Language
} Phone language.
2. Select a language.
Shortcuts
A quicker way to move through the menus is to use shortcuts.
You can use desktop shortcuts to quickly go to a menu, and you
can use predefined standby shortcuts to quickly reach certain
functions.
When using the camera, press to turn on the
photo light.
Press and hold to set the phone to silent.
Press once to turn off the ringtone when
receiving a call.
Using desktop shortcuts
Enter the menus by pressing
and then enter the number
of the menu to which you want to go. For example, to reach the
Phone language
fifth menu item, press
twelfth menu items, press
To go back to standby, press and hold
. To reach the tenth, eleventh and
and respectively.
,
Most SIM cards automatically set the language used in the
menu to the language of the country where you bought your
SIM card. If this is not the case, the predefined language is
English.
.
Using standby shortcuts
You can use the predefined shortcuts and use the navigation
keys to go directly to that function in standby.
14
This is the Internet version of the user's guide. © Print only for private use.
Basics
Predefined standby shortcuts
In your Vodafone live! phone, the following shortcuts are
predefined in standby:
You can select the network you want to use, or you can add a
network to your list of preferred networks. You can also change
the order in which networks are selected during an automatic
search. For all such options } Settings } the Connectivity tab
• Press
• Press
• Press
• Press
to use Create new message.
to use Calendar.
to go to Activity menu.
to use Contacts.
} Mobile networks. Use
or
to scroll between the tabs.
To make a call
1. Enter the phone number (with international country code and
area code if applicable).
To edit a standby shortcut
2. } Call to make a voice call, or press and hold
to make
} Settings } the General tab } Shortcuts and select which
shortcut you want to edit } Edit. Press
delete the shortcut.
if you want to
You can call numbers from your contacts and call list,
%22 Contacts, and %26 Call list. You can also use
Calling
Before you can make or receive any calls, you must turn on the
phone and be within range of a network. %11 Turning on the
phone and making calls. To make a video call, %17 Video call.
To change the ear speaker volume
Press
or
to increase or decrease the ear speaker
volume during a call.
Networks
To use the loudspeaker during a voice call
When you turn on the phone, it automatically selects your home
network if this is within range. If it is not within range, you may
use another network, provided your network operator has an
agreement that allows you to do so. This is called roaming.
1. } More } Turn on speaker to turn on the loudspeaker.
2. } More } Turn off speaker to turn off the loudspeaker.
Note: Do not hold the phone to your ear while using the
loudspeaker. This could damage your hearing.
This is the Internet version of the user's guide. © Print only for private use.
15
Basics
To turn off the microphone
If New events is set to Pop-up, Missed calls: appears,
indicating the number of missed calls. To view the missed calls
in the call list } Yes. If you want to view the missed calls later
} No.
1. Press and hold
.
2. To resume the conversation, press and hold
again.
Receiving calls
When you receive a call, the phone rings and the caller’s number
is displayed (if your subscription includes the Calling Line
Identification service and the caller’s number is identified).
To check your missed calls
1. From standby } Calls } the Missed tab. Use
to scroll between the tabs.
or
2. Use
a number.
or
to scroll to a number and } Call to call
If the number is in your contacts, the name, number, and
picture (if assigned) are displayed. If the number is a restricted
number, Withheld is displayed.
Automatic redialling
To re-dial a number
You can use your voice to answer or reject calls,
%28 Voice answering.
If the connection of the call failed and Retry? is displayed } Yes.
Note: Do not hold the phone to your ear while waiting. When
the call is connected, the phone gives a loud signal.
To answer a call
} Answer.
The phone redials the number up to ten times or until:
To reject a call
• The call is connected
• You press Cancel
• You receive a call
} Busy or quickly press a volume button twice.
Missed calls
If you have missed a call, and if New events is set to Activity
menu, the missed call appears in the Activity menu. } Call
to call the missed number.
Automatic redialling is not available for data calls.
16
This is the Internet version of the user's guide. © Print only for private use.
Basics
To view your local emergency numbers
Making international calls
} Contacts } Options } Special numbers } Emergency nos.
When you make an international call, the + sign replaces the
international prefix number of the country from which you are
calling. You can make a call from abroad, using another network,
provided your network operator has an agreement with that
network.
Video call
With video call, you can see the person you are talking to on
your screen.
To make international calls
When the 3G network icon is displayed in the status bar at the
top of the screen, you are able to make and receive video calls
to and from other 3G telephones.
1. Press and hold
until a + sign appears on the screen.
2. Enter the country code, area code (without the leading zero)
and phone number } Call.
Before you start
Emergency calls
To make a video call, both you and the person you are calling
need a subscription that supports the 3G (UMTS) service, and
you need to be within range of a 3G (UMTS) network. 3G (UMTS)
service is available when the 3G icon appears in the status bar.
Your phone supports the international emergency numbers,
for example, 112 and 911. This means that these numbers
can normally be used to make an emergency call in any country,
with or without a SIM card inserted, if a 3G (UMTS) or GSM
network is within range.
Video call demo mode
You can use the video call functions without making a call,
if you, for example, want to prepare a view and check how
it looks before calling. Press and hold
call functions are available in the demo mode.
Note: In some countries, other emergency numbers may also
be promoted. Your network operator may therefore have saved
additional local emergency numbers on the SIM card.
. Most video
To make an emergency call
Enter, for example, 112 (the international emergency number)
} Call.
This is the Internet version of the user's guide. © Print only for private use.
17
Basics
To make a video call
• In standby, Calls, highlight a number and press
• In contacts, highlight a number and press
.
.
• In a message, highlight a number in the message and press
.
To adjust the brightness of the outgoing video
Press
to decrease the brightness, or
to increase the
brightness of the outgoing video picture.
To zoom the outgoing video in or out
Press
to zoom in the outgoing video and press
to zoom out.
To accept an incoming video call
1. Press and hold
when 3G (UMTS) service is available.
2. Enter the phone number and press Call. To retrieve a phone
number from your contacts } Call... } Contacts and scroll
to the phone number you want to call } Call or press and
Press Answer.
To end a video call
hold
.
During an ongoing video call, press End call.
3. Press Camera or open the lens cover to switch cameras
from the front camera to the back camera. Hold the phone
horizontally, so that the person you are talking to will see the
image at a correct angle.
Video call options
Press
when using the front camera to view, and select from
the following options:
• Stop camera/Start camera – turn off and on the outgoing
video camera. An alternative picture is showed when the
camera is off.
You can also make video calls from standby or from other
applications, such as the contacts or messages.
• Turn off speaker/Turn on speaker – turn off and on the
incoming sound during a video call.
18
This is the Internet version of the user's guide. © Print only for private use.
Basics
• Mute microphone/Unmute mic. – turn off and on the
microphone during a video call (this option is available
during calls).
• Switch pictures – choose between showing the incoming
or the outgoing video in full size display.
• Hide small pic./Show small pic. – choose if you want
to hide or show the small picture.
• Night mode – use when the lighting conditions are poor.
This setting affects the outgoing video.
• Transfer sound – transfer the sound to and from
handsfree equipment using Bluetooth.
• Demo clip – turn demo clip on or off.
Entering letters
There are two ways of entering letters, for example, when
writing a message or writing a name in contacts:
• Advanced – to view, and select, the following options:
• Alternative pic. – this picture will be shown to the other
party when you have turned off the camera.
• Answer mode – choose whether the front camera should
be on or off when you answer a video call. If you answer
with the front camera turned off, you can easily turn it on
by pressing Camera.
• Camera quality – select what picture quality to use for
the outgoing video. This setting will take effect at the next
call – not during an ongoing call.
• Mirror image – you will see a mirror image of the outgoing
video. If you turn mirror image on, you will see yourself as
you would in a mirror. The other party will see the picture
non-mirrored.
• Contacts – select a contact to view during an ongoing
call – useful, for example, when you want to check a
number or an email address for a contact (this option
is visible during calls).
• Multitap text input
You press each key as many times as needed to show the
letter you want.
• T9™ Text Input
The T9 Text Input method uses a built-in dictionary to
recognize the most commonly used word for each sequence
of key presses. This way, you press each key only once,
even if the letter you want is not the first letter on the key.
Writing languages
Before you start entering letters, you need to select the
languages that you want to use when writing.
To select writing language
1. } Settings } the General tab } Language
} Writing language.
2. Scroll to each language that you want to use and mark it.
} Save to exit the menu.
This is the Internet version of the user's guide. © Print only for private use.
19
Basics
When writing, you can switch to one of your selected languages
3. If the word shown is the one you want, press
and add a space. To accept a word without adding a space,
press . If the word shown is not the one you want, press
to accept
by pressing and holding
.
To enter letters using multitap text input
or
to view alternative words. Accept a word and add
1. To enter text, you have to be in a function where text input is
a space by pressing
.
possible, for example } Messaging } Create new } SMS. 4. Continue writing your message. To enter a full stop or other
2. Press the appropriate key,
repeatedly until the character you want appears on the
–
,
or
,
punctuation marks, press
repeatedly. Accept by pressing
and then
.
or
screen. You can see which characters you can choose in the
box in the top right corner of the screen.
To add words to the T9 Text Input dictionary
1. While entering letters } More } Spell word.
Example:
• To enter an ‘A’, press
• To enter a ‘B’, quickly press
• To shift between capital and lower-case letters, press
then enter the letter.
2. Edit the word by using multitap input. Navigate between the
letters with and . To delete a character, press
To delete the entire word, press and hold
3. When you have edited the word } Insert. The word is added
to the T9 Text Input dictionary. Next time you enter this word
using T9 Text Input, it will appear as one of the alternative
words.
once.
.
twice.
.
,
• You can use the volume buttons as a shortcut to certain
letters. To enter a ‘B’, press and hold the
volume
button and press
the
. To enter a ‘C’, press and hold
To select another writing method
volume button and press
.
Before, or while entering letters, press and hold
another writing method.
to select
To enter letters using T9™ Text Input
1. To enter text, you have to be in a function where text input is
possible, for example } Messaging } Create new } Text
message.
Options list
Before, or while entering letters, } More to view a list of
options. The list may contain some or all of the following:
2. For example, if you want to write the word “Jane”, press
,
,
,
.
20
This is the Internet version of the user's guide. © Print only for private use.
Basics
• Add symbol – symbols and punctuation marks such as ?
and , are shown. Move between the symbols by using
and
folders, to which you can move your saved files. You can also
transfer the saved files to a computer, %66 File transfer using
Bluetooth and %67 Transferring files using the USB cable.
,
,
.
• Add item – pictures, melodies, sounds, templates and
If you highlight a file in the Pictures or Sounds folder } More
} Use as, you can use the file for several purposes. You can,
for example, set a sound as a ringtone, set a picture as screen
saver, or add a picture to a contact.
animations.
• Spell word – for T9 Text Input only. Edit the suggested
word by using multitap text input.
• Writing language – a list of available languages is shown.
• Writing method – a list of methods available for the
current language is shown.
• Dictionary (T9) – turn T9 Text Input dictionary on or off.
• Word suggestions – select to view, or not, word
suggestions when writing a word.
To move a file to a folder
1. } My Items and open a folder.
2. Scroll to a file, for example, a picture that you want to
move } More } Manage files } Move to folder.
3. Select the folder you want to move the file to, or select
New folder and name the folder } OK.
• My words – manage the words that you have added to the
dictionary.
• National chars. – turn off language-specific characters
to save space. This option appears only for some writing
languages.
To create a subfolder
1. } My Items and open a folder.
2. } More } New folder and enter a name for the folder.
3. } OK to save the folder.
My items
To select several files
Use the My Items to handle files saved in the phone memory.
Items such as Pictures, Videos, Sounds, Themes, Games,
Applications, and Web pages are saved as files in folders. All
files that the phone cannot recognize are saved in the Other
folder. You can create your own subfolders in some predefined
1. } My Items and select a file } More } Mark
} Mark several.
2. Scroll and select more files by pressing Mark or Unmark.
This is the Internet version of the user's guide. © Print only for private use.
21
Basics
To select all files in a folder
To select default contacts
} My Items and select a file } More } Mark press Mark all
or Unmark all to remove the selection.
1. } Contacts } Options } Advanced } Default contacts.
To move or copy files to a computer
Contacts
Contacts is like an address book, in which you can store names,
phone numbers and email addresses. You can also add pictures,
ringtones and personal information, such as birthday, email,
Web and street addresses, to the contacts.
%66 File transfer using Bluetooth and %67 Transferring files
using the USB cable.
File information
Items that are downloaded, or received using one of the available
transfer methods, may be copyright-protected. If a file is
protected, you may not be able to copy or send that file. You
can select to view information for the file.
When you add information to a contact, the information is
organized under five tabs.
To add a phone contact
1. } Contacts } New contact } Add.
2. Enter the name directly or press Add and enter the name
} OK.
3. Enter the number directly or press Add and enter the
number } OK.
4. Select a number type.
Contacts
You can save your contact information in the phone memory as
contacts, or on the SIM card as names and numbers. You can
choose which contacts information – Phone contacts or SIM
contacts – is shown as default.
5. Scroll between the tabs using
and . Select fields to
For useful information and settings } Contacts } Options.
enter more information. To enter symbols, for example, @ in
an email address } Symbols and select a symbol } Insert.
6. When you have entered the information } Save.
Default contact
If you select to use Phone contacts as default, your contacts
will show all information saved in Contacts. If you select
SIM contacts as default, the contacts will only show names
and numbers saved on the SIM card.
22
This is the Internet version of the user's guide. © Print only for private use.
Basics
SIM contacts
Checking the memory
On your SIM card, you can save entries as a name with a single
number. The number of entries you can save depends on the
amount of memory available on the SIM card, see Contacts
} Options } Advanced } Memory status.
With the memory status function, you can check how many
positions you have left in the phone memory and SIM memory.
If the memory is full, you must delete contacts to be able to add
new contacts, %25 To delete a contact.
Note: Contact your network operator for more information.
To check the memory
To add a SIM contact
} Contacts } Options } Advanced } Memory status.
If SIM contacts are default contacts, follow the same steps as
for adding a phone contact. You can add only name and number
to SIM contacts.
Pictures and personal ringtones
You can add a picture and a personal ringtone to a phone
contact. When that person calls, the picture is displayed
(provided your subscription supports the Calling Line
Identification service) and the ringtone is played.
Always save on the SIM card
You can set the phone to save entries automatically to the SIM
card. With this setting, names and phone numbers that you add
to or edit in your phone contacts in the phone memory are also
saved on the SIM card. The number of phone numbers that can
be saved depends on the type of SIM card.
To add a picture or a ringtone to a phone contact
1. } Contacts and select the contact you want to add
a picture or ringtone to } More } Edit contact.
2. Use
,
,
and
to scroll to the relevant tab.
To automatically save names and phone numbers to the
SIM card
} Picture: or Ringtone } Add.
3. Select a picture or sound. } Save to save the contact.
1. } Contacts } Options } Advanced } Auto save on SIM.
2. Select On.
Calling contacts
You can call one of the numbers saved for one of your contacts,
or a number on your SIM card.
This is the Internet version of the user's guide. © Print only for private use.
23
Basics
If phone contacts are set as default, you can choose to call from
contacts or from the SIM card.
Updating contacts
You can easily update and edit any information in your contacts.
If SIM contacts are set as default, you can only call the numbers
on the SIM card.
To edit a phone contact
1. } Contacts and select a contact } More } Edit contact.
To call a phone contact
2. Use
,
,
and
to scroll to the relevant tab and
edit the information you want to edit } Save.
1. } Contacts. Scroll to, or enter the first letter or letters of the
contact you want to call.
To edit a SIM contact
2. When the contact is highlighted, press
or
to select a
1. If SIM contacts are set as default } Contacts and select the
name and number you want to edit. If phone contacts are
set as default } Contacts } Options } SIM contacts.
Select the name and number you want to edit.
number } Call. To make a video call, press and hold
when the contact is highlighted.
To call a SIM contact
2. } More } Edit and edit the name and number.
1. } Contacts. If SIM contacts are set as default, select the
name and number you want to call from the list } Call.
2. If phone contacts are set as default } Contacts } Options
} SIM contacts and select the name and number you want
to call from the list } Call.
To add numbers
You can update your contacts with numbers that you have
dialled and with numbers from calls that you have received
or missed.
Ask to save
1. } Calls from standby and select a tab in the call list.
2. Scroll to the number you want to add to the contacts
} More } Save number.
When you end a call or receive a message, the phone can
prompt you to add a phone number or email address to your
contacts.
3. Add the number to a new contact or to an existing contact.
To activate ask to save
} Contacts } Options } Advanced } Ask to save } On.
24
This is the Internet version of the user's guide. © Print only for private use.
Basics
To delete a contact
Sending contacts
You can send contacts using one of the available transfer
methods.
} Contacts and scroll to the contact you want to delete,
press
.
To delete all contacts
To send a contact
1. } Contacts } Options } Advanced } Delete all
contacts.
2. } Yes and enter the phone lock code } OK. The default
phone lock code is 0000. Names and numbers that are
saved on the SIM card are not deleted.
} Contacts and select a contact } More } Send contact
and select a transfer method.
To send all contacts
} Contacts } Options } Advanced } Send all contacts
and select a transfer method.
Default items for phone contacts
A default item is displayed in the first position for a phone contact,
and is therefore quicker to access. You can set the default item
– a phone number, email address or a Web address – to be
displayed first for each contact. If you do not set your own
default item, the mobile phone number is the default item.
Synchronizing contacts
You can back up and synchronize your contacts with the
Vodafone live! network.
1. } Contacts } Options } Sync. contacts.
2. If you have more than one account, select which account to
use } Select. If you do not have an account in the phone,
%62 To enter the remote synchronization settings.
To set the default item for a contact
1. } Contacts and scroll to a contact } More
} Default number.
2. Select the phone number, email address or Web address
that you want as default item.
Note: This feature is not available in the handset for all countries.
This is the Internet version of the user's guide. © Print only for private use.
25
Basics
To add a number from the call list to contacts
Copying contacts
You can copy names and numbers to and from your phone
contacts and the SIM card. Choose if you want to copy all
numbers, or a single number.
1. } Calls from standby and select a tab.
2. Scroll to the number you want to add } More } Save number.
3. } New contact to create a new contact, or select an existing
contact to add the number to.
Note: When you select to copy all contacts from the phone to
the SIM card, all existing information on the SIM card will be
replaced.
To clear the call list
} Calls } the All tab } More } Delete all.
To copy names and numbers to the SIM card
1. } Contacts } Options } Advanced } Copy to SIM.
2. Select Copy all or Copy a number.
Speed dialling
You can save the phone numbers that you want to reach easily
in positions 1-9 in your phone.
To copy names and numbers to phone contacts
1. } Contacts } Options } Advanced } Copy from SIM.
2. Select Copy all or Copy a number.
To speed dial
From standby, enter the position number and } Call.
Call list
To set or replace speed dialling numbers
The numbers of the most recent calls are saved in the call list.
Dialled, answered and missed calls are listed under separate tabs.
1. } Contacts } Options } Speed dial.
2. Scroll to the position in the list } Add or } Replace.
3. Select an existing contact to add the position number to.
To call a number from the call list
1. } Calls from standby and select a tab.
Voicemail
If your subscription includes an answering service, callers can
leave a voicemail message when you cannot answer a call.
2. Use
,
,
and
to scroll to the name or number
you want to call } Call, or press and hold
a video call.
to make
26
This is the Internet version of the user's guide. © Print only for private use.
Basics
Calling your voicemail service
You can easily call your voicemail service by pressing and
You must first activate the voice dialling function and record your
voice commands. An icon appears next to a phone number that
has a voice command.
holding
. If you have not set your voicemail number, you
will be asked if you want to enter the number. } Yes to enter
the number. You get the number from your network operator.
To activate voice dialling and record names
To enter your voicemail number
} Messaging } Settings } Voicemail number.
to view the numbers. Select the phone number to which you
want to add the voice command. Now you are going to record
a voice command such as “John mobile” for the phone number
you selected.
3. Instructions appear. Wait for the tone and say the command
that you want to record. The voice command is played back
to you.
Voice control
With your phone, you can use your voice to:
• Voice dial – call someone by saying the name.
• Activate voice control by saying a “magic word”.
• Answer and reject calls when using a handsfree kit.
4. If the recording sounds ok } Yes. If not } No and repeat
Voice commands can only be saved in the internal phone memory,
not on the SIM card. When recording, make sure that you are in
a quiet environment and try to use names that are distinct from
each other, %29 Tips when recording and using voice
commands.
step 3.
5. To record another voice command for a contact } New voice
} Add again and repeat steps 2-4 above.
To make a call from the phone
1. From standby, press and hold one of the volume buttons.
2. Wait for the tone and say the name you recorded earlier, for
example “John mobile”. The name is played back to you and
the call is connected.
Voice dialling
You can voice dial by saying a pre-recorded voice command.
Start voice dialling from standby using the phone, a portable
handsfree, a Bluetooth headset or by saying your magic word.
This is the Internet version of the user's guide. © Print only for private use.
27
Basics
To make a call with a handsfree
3. Instructions appear. } Continue and select the environments
in which you want your magic word to be activated. You can
select several alternatives.
From standby, press the handsfree button, or the Bluetooth
headset button.
Voice answering
Caller name
You can answer or reject incoming calls by using your voice,
when using a portable or car handsfree kit.
You can choose whether you want to hear the recorded contact
name when you receive a call from that contact.
Note: You can only use a MIDI, WAV, EMY or IMY file
as a ringtone with voice answering.
To turn the caller name on or off
} Settings } the General tab } Voice control
} Play caller name.
To activate voice answering and record voice answer
commands
The magic word
1. } Settings } the General tab } Voice control
} Voice answer } Activate. Instructions appear.
} Continue. Wait for the tone and say “Answer”,
or another word. If the recording sounds ok } Yes.
If not } No and repeat step 2.
You can record a magic word and use it as a voice command to
allow totally handsfree access to voice dialling. Instead of pressing
and holding a volume button to voice dial, you say the magic
word and then one of your recorded voice commands. The magic
word is especially suitable when using a car handsfree kit.
2. Say “Busy”, or another word } Yes.
Note: Choose a long, unusual word or phrase that can easily be
distinguished from ordinary background speech.
3. Instructions appear. } Continue and select the
environments in which you want voice answering to be
activated. You can select several alternatives.
To activate and record the magic word
To answer a call using voice commands
1. } Settings } the General tab } %27 Voice control
} Magic word } Activate.
When the phone rings, say “Answer” and the call is connected.
2. Instructions appear. } Continue. Wait for the tone and say
the magic word.
28
This is the Internet version of the user's guide. © Print only for private use.
Basics
To reject a call using voice commands
• You did not record the voice command when the handsfree
was attached – for voice control with a handsfree kit, record
when the handsfree is attached.
• You used another intonation – use the same intonation
as in the recorded voice command.
When the phone rings, say “Busy”. The call is rejected. The
caller is diverted to voicemail, if activated, or hears a busy tone.
Editing your voice commands
You can edit all your voice commands saved in Contacts.
Select the contact you want to edit a voice command for
} More } Edit contact. Scroll to the relevant tab and edit
your voice command.
Diverting calls
If you cannot answer incoming calls, you can divert them
to another number, for example, your answering service.
To re-record a voice command
Note: When the Restrict calls function is activated, some Divert
calls options are not available.
1. } Settings } the General tab } Voice control
} Voice dialling } Edit names.
2. Select a voice command } More } Replace voice.
3. Wait for the tone and say the command.
You can choose between the following divert options:
• Divert always – divert all calls.
Tips when recording and using voice commands
If your phone cannot detect your voice command, one of the
following might have happened:
• When busy – divert calls if you are already on the phone.
• Not reachable – divert calls if your phone is turned off
or if you are unreachable.
• No reply – divert calls that you do not answer within
a specified time limit.
• You spoke too softly – try speaking louder.
• You held the phone too far away – hold it as you do during
a call.
• The voice command was too short – it should be around one
second long and more than one syllable.
• You spoke too late or too soon – speak immediately after
the tone.
This is the Internet version of the user's guide. © Print only for private use.
29
Basics
To activate a call divert
To activate or deactivate the call waiting service
1. } Settings } the Calls tab } Divert calls. Use
to scroll between the tabs.
or
} Settings } the Calls tab } Manage calls } Call waiting.
Use
or
to scroll between the tabs.
2. Select a call type and then one of the divert options
} Activate.
3. Enter the phone number to which you want your calls to be
To make a second call
1. } More } Hold call to put the ongoing call on hold.
diverted, or press Look up to find the contact } OK.
2. Enter the number you want to call } More } Call.
To deactivate a call divert
Receiving a second voice call
When you receive a second call, you can do the following:
Scroll to the divert option } Deactivate.
• } Answer and put the ongoing call on hold.
• } Busy to reject the second call and continue the ongoing
call.
• } Replace active call to answer the second call and end
the ongoing call.
To check all divert options
} Settings } the Calls tab } Divert calls } Check all. Use
or
to scroll between the tabs.
More than one call
Handling two voice calls
When you have one ongoing call and one call on hold, you can
do the following:
You can handle more than one call simultaneously.
Note: When you have an ongoing video call and receive a second
call you have to end the video call to be able to answer the
second call.
• } Switch calls to switch between the two calls.
• } More } Join calls to join the two calls into a conference
call.
• } More } Transfer call, to connect the two calls. You are
disconnected from both calls.
Call waiting service
When the service is activated, you hear a beep if you receive
a second call.
30
This is the Internet version of the user's guide. © Print only for private use.
Basics
• } End call to end the ongoing call, then press Yes to
retrieve the held call.
• } End call } No to end both calls.
• You cannot answer a third call without ending one of the first
two calls or joining them into a conference call.
To release a participant
} More } Release part and select the participant that you
want to release from the conference call.
To have a private conversation
1. } More } Talk to and select the participant that you want
to talk to.
2. } More } Join calls to resume the conference call.
Conference calls
In a conference call, you can have a joint conversation with up
to five other people. You can also put a conference call on hold
and make another call.
More call features
My numbers
Note: There may be additional charges for calls involving
multiple parties, contact your network operator for more
information.
View, add and edit your own phone numbers.
To join the two calls into a conference call
To check your phone numbers
} More } Join calls.
} Contacts } Options } Special numbers } My numbers
and select one of the options.
To add a new participant
Notepad
1. } More } Hold call to put the joined calls on hold.
2. } More } Add call and call the next person you want
to include in the conference call.
You can use the phone to make a note of a phone number
during a call. When you press the number keys, the person
you are talking to hears tone signals. When you end the call,
the number remains on the screen. } Call to call the number.
} More } Save number and select a contact to save the
number. If you want to create a new contact and save the
number } New contact.
3. } More } Join calls.
4. Repeat steps 1-3 to include more participants.
This is the Internet version of the user's guide. © Print only for private use.
31
Basics
Groups
Showing or hiding your number
You can create a group of numbers and email addresses. By
doing so, you can send messages to several recipients at the
same time, %35 Messaging.
If your subscription supports the Calling Line Identification
Restriction (CLIR) service, you can hide your phone number
when making a call.
You can also use groups (with numbers) when you create
accepted callers lists, %32 Accept calls.
To always show or hide your phone number
1. } Settings } the Calls tab } Show or hide no. Use
or
to scroll between the tabs.
To create a group of numbers and email addresses
2. Select Show number, Hide number or Network default.
1. } Contacts } Options } Groups } New group } Add.
2. Enter a name for the group } Continue.
3. } New } Add to find and select a contact number.
4. Repeat step 3 to add more numbers. } Done.
Accept calls
With the accept calls service, you can choose to receive calls
only from certain phone numbers. Other calls are automatically
rejected by a busy tone. If the call divert option When busy is
activated, calls are diverted instead of rejected by a busy tone.
The phone numbers of calls you have rejected are saved in the
call list.
Business cards
You can add your own business card as a contact.
To add your own business card
} Contacts } Options } My business card and add
To add numbers to the accepted callers list
information for your business card } Save.
1. } Settings } the Calls tab } Manage calls } Accept
calls } Only from list } Edit } Add. Select a contact.
To send your business card
Use
} Contacts } Options } My business card } Send my card
and select a transfer method.
2. To add a group of contacts to the accepted callers list
} Groups (requires that you have created groups,
%32 Groups).
32
This is the Internet version of the user's guide. © Print only for private use.
Basics
To accept all calls
Fixed dialling
The fixed dialling function allows calls to be made only to certain
numbers saved on the SIM card. The fixed numbers are
protected by your PIN2.
} Settings } the Calls tab } Manage calls } Accept calls
} All callers. Use
or
to scroll between the tabs.
Restricted dialling
You can use the restrict calls service to restrict outgoing and
incoming calls. You need a password which you get from your
service provider.
Note: You can still call the international emergency number,
112, even when the fixed dialling function is activated.
Partial numbers can be saved. For example, saving 0123456
allows calls to be made to all numbers starting with 0123456.
Note: If you divert incoming calls, you cannot activate some
Restrict calls options.
Note: When fixed dialling is activated, you cannot view or
manage any phone numbers that are saved on the SIM card.
The following calls can be restricted:
To activate or deactivate fixed dialling
• All outgoing – All outgoing calls.
• Outgoing intl – All outgoing international calls.
• Outgoing intl roam. – All outgoing international calls
except to your home country.
1. } Contacts } Options } Special numbers
} Fixed dialling and select Activate or Deactivate.
2. Enter your PIN2 } OK and then } OK again to confirm.
• All incoming – All incoming calls.
• Inc. when roaming – All incoming calls when you are
abroad (when roaming).
To save a fixed number
} Contacts } Options } Special numbers } Fixed dialling
} Fixed numbers } New number and enter the information.
To activate or deactivate a call restriction
Two voice lines
If you have a subscription that supports an alternate line
service, your phone may have two voice lines with different
phone numbers.
1. } Settings } the Calls tab } Manage calls } Restrict
calls and select an option. Use
the tabs.
or
to scroll between
2. Select Activate or Deactivate, enter your password } OK.
This is the Internet version of the user's guide. © Print only for private use.
33
Basics
To select a line for outgoing calls
Activity menu
You can open the activity menu from standby to view and
handle new events, and access bookmarks and shortcuts.
} Settings } the Calls tab and select line 1 or 2. Use
or
to scroll between the tabs.
To change the name of a line
To open the Activity menu
} Settings } the Display tab } Edit line names and select
one of the lines to edit the name. Use
the tabs.
Press
.
or
to scroll between
Activity menu tabs
• New events – this shows new events such as missed calls
and messages. When a new event occurs, the tab appears
Call time and cost
During a call, the duration of the call is shown on the screen.
You can check the duration of your last call, outgoing calls and
the total time.
on the screen. Press
from the event tab.
to dismiss or delete an event
• My shortcuts – this shows your shortcuts and applications
that are running in the background. You can add, delete and
change the order of shortcuts. When you select a shortcut
and the application opens, other programs are closed or
minimized.
• Bookmarks – this shows your own Internet bookmarks.
When you select a bookmark and the browser opens, other
programs are closed or minimized.
To check the call time
} Settings } the Calls tab } Time & cost } Call timers.
Use
or
to scroll between the tabs.
Tone signals
You can use telephone banking services or control an
answering machine by sending tone signals during a call.
To select a view for new events
If you want new events to appear as pop-up text instead of in
the activity menu, } Settings } the General tab } New events
} Pop-up.
• To send the tones, press the keys
or
• To clear the screen after the call is finished, press
• To turn the tones off during a call, } More } Disable tones.
-
,
.
.
34
This is the Internet version of the user's guide. © Print only for private use.
Messaging
Before you start
Messaging
First make sure that the number of your service centre is set.
The number is supplied by your service provider and is usually
saved on the SIM card.
This chapter gives information about the types of messages
supported in your phone as well as a complete Messaging
glossary.
To set the service centre number
1. } Messaging } Settings } SMS } Service centre. If the
service centre number is saved on the SIM card, it is shown
in the list.
You will find instructions on how to send, read and manage text
messages (SMS), picture messages (MMS) and email. You will
also learn about Messenger – the instant messaging function
that allows you to join chat sessions and see which of your
contacts that are online.
Sending text messages
For information about entering letters, %19 Entering letters.
Details about Area Information (traffic reports etc.) and Cell
Information (important information from your network operator)
exist. Please contact your service provider for more information
about these services.
Note: Some language-specific characters use more space.
For some languages you can deactivate National chars.
to save space, %20 Options list.
To write and send a text message
Text messaging (SMS)
1. } Messaging } Create new } SMS.
Text messages can contain simple pictures, animations,
melodies and sound effects.
2. Write your message } Continue. If you want to save the
message for later, press
. } Yes to save it in Drafts.
Note: If you send a text message to a group, you are charged
for each member of that group.
3. } Enter phone no. and enter the recipient’s phone number,
or } Contacts look-up to retrieve a number or a group
from Contacts. To enter an email address } Enter Email
addr. A list below the send options shows the last used
recipients. You can also select a recipient from this list. } Send.
This is the Internet version of the user's guide. © Print only for private use.
35
Messaging
Note: To send a message to an email address, you need to set
an email gateway number, } Messaging } Settings } SMS
} Email gateway. The number is supplied by your network
operator.
Saving and deleting text messages
Text messages are saved in the phone memory. When the phone
memory is full, you must delete messages or move them to the
SIM card to be able to receive new messages. Messages that
you have saved on the SIM card remain there until you delete
them.
To insert an item in a text message
1. While writing your message } More } Add item.
2. Select an item type and then select an item.
To save a message to the SIM card
} Messaging } Inbox } More } Save message } Saved
messages.
Receiving text messages
When you receive a text message, it appears in the Activity
menu if New events is set to Activity menu. } View to read
the message.
To save an item from a text message
1. Select the phone number, Web address, picture or sound
that you want to save in the message } More.
2. If you have selected to save a phone number } Use
} Save number. If you have selected a Web address
} Save bookmark, a picture } Save picture, a melody
} Save sound.
If New events is set to Pop-up, you are asked if you want to
read the text message. } Yes to read the text message or } No
if you want to read the message later.
When you have read the text message } More to view a list of
options. Press
to close the text message.
To save or delete several messages
To call a number in a text message
1. } Messaging and select a folder.
Select the phone number } Call.
2. Select a message } More } Mark several.
3. Scroll and select more messages by pressing Mark
or Unmark.
4. } More } Save messages or } More } Delete messages.
36
This is the Internet version of the user's guide. © Print only for private use.
Messaging
To delete a message
Message options
You can set a default value for several message options or
choose the settings each time you send a message. To check
the delivery status of a sent message, the delivery report option
must be on.
1. } Messaging and select a folder.
2. Select the message that you want to delete and press
.
Long messages
The number of characters that a text message can contain
depends on the language you are writing in. You can send
a longer message by linking two or more messages. You are
charged for each of the messages linked in a long message.
To set a default text message option
} Messaging } Settings } SMS and select an option.
To set a message option for a specific message
You may not receive all parts of a long message at the same time.
1. When you have selected a recipient to send your text
message to } More } Advanced.
Note: Check with your network operator for the maximum
number of messages that can be linked.
2. Select the option that you want to change } Edit and select
a new setting.
To turn long messages on
3. } Done when you have changed the options.
} Messaging } Settings } SMS } Max. msg length
} Max. available.
To check the delivery status of a sent message
} Messaging } Sent messages and select a text message
} View } More } Details.
Templates
If you have messages that you send often, you can save these
as templates. You can create your own templates.
Picture messages (MMS)
To create a template
Picture messages can contain text, pictures, video clips, camera
the receiver of the picture message must have a subscription
that supports MMS. You can send picture messages to a mobile
phone or an email address, %41 Email.
1. } Messaging } Templates } New template } Add
} Text.
2. Write the message } OK.
3. Enter a title for the message } OK.
This is the Internet version of the user's guide. © Print only for private use.
37
Messaging
Before you start
To create and send a picture message
Before sending a picture message, make sure that:
1. } Messaging } Create new } MMS } Add to view a list
of items to add to your message. Select an item.
2. } Add to add more items to the message. You can view and
select options to enhance the message by highlighting items
in the message and pressing the left selection key.
3. When you have finished composing your message } More
} Send to.
1. The address of your message server is set } Messaging
} Settings } MMS } Message server.
2. You have entered the correct settings } Messaging
} Settings } MMS } Internet profile. If no Internet
profile exists } New profile and enter the required settings.
4. } Enter phone no. and enter the recipient’s phone number,
or } Contacts look-up to retrieve a number or a group
from Contacts. To enter an email address } Enter Email
addr.. A list below shows the last 10 recipients. You can
also select a recipient from this list. } Send.
Settings may already be entered when you buy your phone. If
not, you can automatically receive all the settings in a message
from your network operator.
Creating and sending picture messages
When composing a picture message, you can select different
items such as: Picture, Text, Sound, Video, Sound
recording and Page. You can send your business card as an
attachment in a picture message. You can also select Use
camera to take a new picture or record a new video clip.
To make a call while creating a picture message
1. While writing your message } More.
2. } Make a call and enter or retrieve a phone number } Call.
You return to the message.
3. To end the call } More } End call.
Before sending a picture message, you can select from different
options to adjust and enhance your message. The size of the
message is displayed in the top right corner of the screen.
Default message options
You can request a read report, a delivery report and set a priority
for a specific message.
To set a default message option
} Messaging } Settings } MMS and select one of the options.
38
This is the Internet version of the user's guide. © Print only for private use.
Messaging
Additional send options
You can edit the message subject and add or edit recipients
and attachments.
Picture messages are saved in the phone memory. When the
phone memory is full, you must delete messages to be able to
receive new messages, %36 Saving and deleting text messages.
To select additional send options
Templates
When you have entered the recipient’s phone number } More
You can base your message on one of the templates. You can
also add new templates.
and select one of the options.
Receiving picture messages
To use a template for a picture message
When you receive an automatically downloaded picture message,
the picture message appears in the Activity menu if New events
is set to Activity menu. } View to read the message.
1. } Messaging } Templates and select a template.
2. } Use } Add to add new items.
3. } More } Send to to send the message.
If New events is set to Pop-up, you are asked if you want to
read the picture message. } Yes to read or play the message.
} Stop to stop the message.
Automatic download
You can select how you want your picture messages to be
downloaded.
When you have read the message, select } Reply to reply
immediately or select } More to view a list of options. Press
to close the message.
} Messaging } Settings } MMS } Auto download to view
the following:
Note: You can select a message from the list of messages and
• Always – your phone automatically downloads messages to
your phone as soon as they come to your network operator’s
server. This is default.
• Ask in roaming – you will be asked if you want to download
messages when you are in a network other than your home
network.
press
to delete the entire message.
To save items from a picture message
When you have viewed a picture message } More } Save items
and select an item from the list that appears.
This is the Internet version of the user's guide. © Print only for private use.
39
Messaging
• Not in roaming – the messages are never downloaded
when you are in a network other than your home network.
• Always ask – you will always be asked if you want to
download messages, regardless of network used.
• Off – new messages appear in the inbox as icons. Select
the message } View to download.
Receiving voice messages
When you receive a voice message, the voice message
appears in the Activity menu if New events is set to
Activity menu. } Play to listen to the message.
If New events is set to Pop-up, you are asked if you want to
listen to the voice message. } Yes to listen to the voice message
or } No if you want to listen to the message later.
Note: You can always download previously not downloaded
messages in the Inbox by highlighting the message } View.
When you have listened to the voice message } More to view
a list of options. Press
to close the message.
Voice messages
Voice messages offer a quick way to send and receive sound
recordings as messages. A voice message can only contain
one sound recording. Both you and the receiver of the voice
message must have a subscription that supports MMS.
Postcard
As part of Vodafone live! you can have a message with picture
and text delivered as a postcard to a street address.
To record and send a voice message
To send a postcard
1. } Messaging } Create new } Voice message.
The sound recorder starts.
2. Record your message. } Stop to end the recording.
3. } Send to send the message.
4. } Enter phone no. and enter the phone number of the
recipient, or } Contacts look-up to retrieve a number or
a group from Contacts. To enter an email address } Enter
Email addr.. A list below the send options shows the last
10 recipients. You can also select a recipient from this list.
} Send.
1. } Messaging } Create new } Live! Postcard.
2. Select Picture to add a picture to your postcard, or
Use camera if you want to take a picture to include
in the postcard.
3. Write message to accompany the picture } OK.
4. } Send to } Address to enter name and address, or you
can either select Contacts look-up to retrieve a contact,
or select a recipient from the list of previous recipients.
40
This is the Internet version of the user's guide. © Print only for private use.
Messaging
5. When you have entered name and address } OK } Send.
The picture and message will be printed on a postcard and
sent to the address that you select.
Before you start
First make sure that:
• Settings are in your phone, if not, %68 Settings.
• You have set up and selected an email account. The
necessary settings for Email have been preconfigured in
your phone. However, you must configure your personal
Email user name and password. If you are not an Email
customer, visit your network operator‘s Web site for more
information or call your network operator service.
To view a sent postcard
} Messaging } Sent messages and highlight the message
} View.
Note: This feature is not available in the handset for all countries.
More ways of sending postcards
Default email account
Another way of sending a postcard is by selecting a contact,
If you have both an office and a home email account, you can
set one of them as default:
More } Send message } Live! Postcard.
You can also create a postcard by selecting My Items
} Pictures. Select a picture } More } Send } Live!
Postcard.
} Messaging } Email } Settings } Account settings and
select an account.
To write and send an email message
Email
1. } Messaging } Email } Create new.
2. Write the subject for your message } Continue and then
write the text } Continue.
3. } Enter Email addr. to enter an email address or
} Contacts look-up to retrieve an address from Contacts.
4. Select } Send to send your email message or select } More
to view a list of options for your message.
You can use your phone to send and receive email messages.
Please note that you need a subscription that supports data
transmission. For more information, contact your network
operator service.
This is the Internet version of the user's guide. © Print only for private use.
41
Messaging
To send, receive and read email messages
Note: The number of email messages that can be saved depends
on how much memory there is left in the phone. From standby, press
1. } Messaging } Email } Inbox } Send&rec (when
inbox is empty) or } Messaging } Email } Inbox } More
} Send & receive to send or download new messages.
2. Select a message } View to read it.
or
to view status information. All email messages are
also saved on your email server, and you can view both older and
newer messages on the server.
To save several email messages
To reply to an email message
1. } Messaging } Email } Inbox.
2. Select a message } More } Mark several.
3. Scroll and select more messages by pressing Mark
or Unmark.
1. Open the email message } Reply.
2. } Include message to include the original message in your
reply or } Create new to exclude the original message.
Write your message } Continue.
4. } More } Save messages.
3. } Enter Email addr. to enter an email address or
} Contacts look-up to retrieve an address from Contacts.
4. Select } Send.
To delete an email message (POP3 users)
1. } Messaging } Email } Inbox and select the message
} More.
2. } Mark for deletion. The message is deleted the next time
you connect to your email server. If you want to delete several
messages } Mark several. Scroll and select more messages
by pressing Mark or Unmark. } More } Mark for
deletion.
To save an email address or a phone number in an email
message
1. Select the email address or phone number that you want
to save } More.
2. To save an email address } Save address. To save a phone
number } Use } Save number.
To delete an email message (IMAP4 users)
1. } Messaging } Email } Inbox and select the message
} More.
To save an email message
2. } Mark for deletion. The message is marked for deletion
on the server. If you want to delete several messages
} Mark several. Scroll and select more messages by
pressing Mark or Unmark. } More } Mark for deletion.
1. Open the email message } More } Save message
} Saved Email.
2. The message is saved in Saved Email in the Email menu.
42
This is the Internet version of the user's guide. © Print only for private use.
Messaging
3. } More } Clear inbox. and select With send & rec. or No
Status
send & rec. to delete messages.
You can change your status shown to others. You can also
choose to display it for your contacts only or for all users on
the Messenger server.
Messenger
To change your own status
Connect and log in to the Messenger server to communicate
online with your favourite contacts. If your subscription supports
it, you can see contact status if they are online, and send and
receive instant messages.
} Messaging } Messenger }Myself } Change.
Chatroom
A chatroom can be started by your service provider, by an
individual Messenger user or by yourself. You can save
chatrooms either by saving a chat invitation or by searching
for a specific chatroom.
Note: This feature is not available in the handset for all countries.
To log in to your Messenger server
} Messaging } Messenger } Myself } Log in.
To start a chatroom
List of contacts
You can create a list of contacts from your Messenger server,
people you want to send messages to on a regular basis.
1. } Messaging } Messenger } More } Start chatroom.
2. Select contacts to invite to the chatroom from your list of
contacts } Continue.
3. Enter a short invitation text } Continue } Send.
To add a contact
} Messaging } Messenger } More } Add contact and
select an option.
Area information
Area information is a type of text message that is sent to all
subscribers within a certain network area. When you receive an
area information message, the message automatically appears
on the screen. Press Save to save the message in your inbox,
or Discard to delete the message.
To send an instant message from Messenger
1. } Messaging } Messenger and select a contact.
2. } Send IM and type your message } Send.
This is the Internet version of the user's guide. © Print only for private use.
43
Pictures and sounds
Note: Please consult your service provider for more information
about area information.
Pictures and sounds
To turn area information on or off
Here you can see how to take photos and record video clips.
These can be sent as messages or uploaded to a personal
album on Vodafone live! With the Postcard function, you can
learn how to send photos as a traditional postcard.
} Messaging } Settings } Area info } Reception.
Cell information
The cell information channel is used by some network operators
to send messages about a certain network area to their
subscribers within that area.
You can also see how to compose your own melodies using
MusicDJ™ and record sounds with the sound recorder.
To turn on cell information
Camera and video recorder
} Messaging } Settings } Area info } Cell information.
Your phone has a digital camera which also works as a digital
video recorder. You can take pictures, record video clips, save
and view them and send them as email attachments, %41 To
write and send an email message, or send them in picture
messages via MMS, %38 To create and send a picture message.
44
This is the Internet version of the user's guide. © Print only for private use.
Pictures and sounds
To activate the camera
1. Use the navigation key to switch between camera and video
recorder.
2. Press
to take a picture or start recording.
3. To end video recording, press again. To deactivate the camera,
close the lens cover.
Note: If you try to record a strong light source such as direct
sunlight or a lamp, the screen may black out or the picture may
be distorted.
To use the zoom
While in standby, slide the lens cover to activate the camera.
Use the volume buttons on the side of the phone to zoom in and
zoom out.
To take pictures and video clips
To adjust brightness
Use the navigation key to increase or decrease brightness.
To turn on the photo light
To take pictures in a dimly lit environment, press
.
To view your pictures and video clips
When the camera or video is activated } View.
Camera and video options
When the camera or video is activated } Settings to view
more options. Before you take a picture or make a video clip,
the following options are available:
This is the Internet version of the user's guide. © Print only for private use.
45
Pictures and sounds
• Switch to video camera – to record a video clip instead
of taking a picture.
• Switch to still camera – to take a picture instead of
recording a video clip.
• Shoot mode (camera) – select from Normal for no frame,
Panorama to combine several pictures into one wide picture,
Frames to add a frame to your picture and Burst to take
four pictures in rapid succession.
• Shoot mode (video) – select High quality video or For MMS
if you want to send your video clip as a picture message.
• Picture size – choose between 1280x1024, 640x480 and
160x120. All phones that support pictures can receive the
size 160x120.
• Video size – choose between Large 176x144 and
Small 128x96.
• Turn on night mode – enhance picture or video quality
in poor lighting conditions with longer exposure time.
• Turn on light – to enhance lighting conditions.
• Turn on self-timer – the picture is taken a few seconds
after you press the camera button.
• Effects – select different effects for your picture or video.
• White balance – adjust the picture or video colour to the
lighting conditions.
• Picture quality – choose between Normal and Fine
picture quality.
Saving pictures and video clips
saved in the phone memory, %21 My items. You can also
choose to store your pictures and video clips on your computer,
%67 Transferring files using the USB cable.
Sending pictures and video clips
When you have taken a picture or recorded a video clip, you can
send it as a picture message if the file size has not exceeded
the limit, %38 Creating and sending picture messages. For
settings that affect the file size, %45 Camera and video options.
Before you start the receiving phone needs to support data
transmission and picture messaging in order to receive and
show the picture or video clip.
messaging make sure that you have set the address of
your message server for picture messaging, %37 Picture
messages (MMS) and that Internet settings are entered in
• Before you send a picture or video clip using email make
sure that you have entered settings for a data account and
for an email account in your phone, %41 Email.
• Turn on time and date – add a time and date to your
picture.
To exchange pictures and video clips using other transfer
methods %49 Exchanging pictures.
46
This is the Internet version of the user's guide. © Print only for private use.
Pictures and sounds
To send a picture
More ways of sending postcards
When you have taken a picture } Send to send the picture.
You can also create a postcard by selecting My Items
} Pictures. Select a picture } More } Send } Live! Postcard.
To send and play video clips
Album Photo
When you have finished your recording, } Send to send the
video clip.
With Vodafone live!, you can save pictures in a Web-based
album. This is useful if you are running out of phone memory,
or if you wish to share your pictures with friends in a virtual
album that they (and you) can access on the Web. You can
upload a picture in the following ways:
} More } Play to play or press
to delete the video clip.
Postcard
As part of Vodafone live! you can have a message with picture
and text delivered as a postcard to a street address.
To upload a picture
To send a postcard
• } My Items } Pictures, select a picture, More } Send
} Album Photo.
1. Take the picture by pressing the camera button.
2. } Send } Live! Postcard.
3. Write your message } OK.
4. } Send } Address to enter name and address, or you can
either select Contacts look-up to retrieve a contact, or
select a recipient from the list of previous recipients.
5. When you have entered name and address } OK } Send.
The picture and message will be printed on a postcard and
sent to the address that you select.
• From the camera,
} Send } Album Photo.
• You can also upload a message by selecting a folder in
Messaging, highlight a message, More } Album Photo.
Note: This feature is not available in the handset for all countries.
Pictures
Your phone comes with a number of pictures and animations.
You can delete these pictures if you want to free memory. All
pictures are saved in My Items } Pictures. You can:
Note: This feature is not available in the handset for all countries.
This is the Internet version of the user's guide. © Print only for private use.
47
Pictures and sounds
• Use a picture as wallpaper and as a screen saver.
• Assign a picture to a contact. %23 To add a picture or a
ringtone to a phone contact.
• Exchange pictures using one of the available transfer methods.
• Upload pictures to the Album Photo, %47 Album Photo.
Using pictures
You can use a picture for several purposes, for example, add it
to a contact, use it in the start-up screen, or use it as a screen
saver.
The screen saver is activated automatically when you have not
pressed any key for a few seconds. After a few more seconds,
the screen saver changes to sleep mode, to save power. Press
any key on the keypad and the screen turns on again. If you have
a picture as wallpaper, this picture is shown in standby mode.
Handling pictures
You can add, edit and delete pictures in My Items. The
number of pictures that you can save depends on the size of
the pictures, %48 To view information about a picture or video
clip. File types supported are, for example, GIF, JPEG, WBMP,
BMP, PNG and SVG-Tiny.
To use a picture
1. } My Items } Pictures and scroll to the picture you want
to use } More } Use as.
To view your pictures
1. } My Items } Pictures.
2. The pictures are shown in thumbnail view. To get a full view
} View.
2. Select what you want to use the picture for.
PhotoDJ™
When editing pictures press
keys: to activate the tool,
to select a colour.
,
,
,
and the following
To display pictures in a slide show
to select the tool and
1. } My Items } Pictures and scroll to a picture.
2. } View } More } Slide show.
To edit and save a picture
To view information about a picture or video clip
1. } Entertainment } PhotoDJ™ and scroll to the picture
you want to edit } Select. Some pictures you have taken
with the camera can be edited.
1. } My Items } Pictures or Videos, select the picture
or video clip.
2. } More } Information.
2. To save the edited picture } More } Save picture.
48
This is the Internet version of the user's guide. © Print only for private use.
Pictures and sounds
Exchanging pictures
the phone to control the screen. Use the slide show function to
show several pictures in succession.
methods. Please note that you are not allowed to exchange
copyright-protected material. For more information on sending
pictures in messages %37 Picture messages (MMS).
To connect to a remote screen
} My Items } Pictures and scroll to the picture you want
} View } More } Remote screen. The phone searches
for other Bluetooth devices and a list of available devices is
displayed. Select the device you want to use.
To send a picture
} My Items } Pictures and scroll to the picture you want.
} More } Send and select a transfer method.
Radio
To receive and save a picture
Your phone features an FM radio with RDS functionality. To use
the radio, you must connect the handsfree to your phone. The
handsfree works as an antenna and makes the reception better.
1. Open the message you received the picture in, or turn on
Bluetooth or the infrared port if one of these transfer methods
was used to send the picture.
2. If you received the picture in a message, select the picture
and save it. If you received the picture via Bluetooth or
infrared, follow the instructions that appear on the screen.
Note: You must switch your phone on to use the radio. Do not
switch the phone on in areas where mobile phones are prohibited,
%86 Guidelines for Safe and Efficient Use.
Note: All phones that support pictures can receive the picture
size 160x120. Some phones that support pictures cannot
receive picture sizes of more than 160x120. The best picture
size to view on a computer is 1280x1024.
To listen to the radio
Connect the handsfree to your phone } Radio.
Radio control
• } Search to find the next channel on the band.
Remote screen
You can view your pictures on a remote screen, for example,
a TV, using a compatible Bluetooth adapter. The adapter is
an accessory and not included in the box. You can then use
• Press
and hold to move continuously.
• Press or for the next preset channel.
or
to move 0.1 MHz along the FM band. Press
This is the Internet version of the user's guide. © Print only for private use.
49
Pictures and sounds
Saving radio channels
While listening to the radio
You can save up to 20 of your favourite radio channels.
If you minimize the radio display, you can listen to the radio and
use another functionality at the same time. For example, you
can make and receive calls, send messages and play games.
Note: To save channels quickly in positions 1 to 10, press
and hold 0–9, (where 0 represents the number 10). To select
a channel you have saved in positions 1 to 10, press 0–9.
To minimize the radio display
} Radio } More } Minimize.
To save a radio channel
} More } Save } Insert. The channel is saved in a list.
To adjust the volume
Press
or
.
Radio options
} More for the following options:
Composing melodies
• Minimize – return to standby to use other functions with
the radio still playing.
• Save – save the current frequency in a list of channels.
• Channels – select, rename, replace or delete saved
channels.
• Turn on speaker – listen through the loudspeaker.
• Auto save – automatically search for and save channels in
a list of channels. Previously saved channels will be replaced.
• Set frequency – enter a frequency manually. The figures
you enter will be automatically adjusted to valid frequencies.
You can compose and edit melodies to use as ringtones using
™
the MusicDJ . A melody consists of four types of tracks –
Drums, Basses, Chords, and Accents. A track contains a
number of music blocks. The blocks consist of pre-arranged
sounds with different characteristics. The blocks are grouped
into Intro, Verse, Chorus and Break. You compose a melody
by adding music blocks to the tracks.
To compose a melody
1. } Entertainment } MusicDJ™.
2. Choose to Insert, Copy and Paste blocks to compose your
Press
to go directly to Set frequency.
• RDS – options to turn on or off alternative frequency (AF)
and to show or hide station information.
• Turn on Mono – turn mono sound on.
melody. Use
Press
,
,
or
to move between the blocks.
to delete a block. } More to view more options.
50
This is the Internet version of the user's guide. © Print only for private use.
Pictures and sounds
To edit a previously created melody
To create a movie
} My Items } Sounds and select the melody } More } Edit. 1. } Entertainment } VideoDJ™.
2. } Add. Select to add a Video clip, a Picture or Text
} Select.
Sending and receiving
You can send and receive melodies using one of the available
transfer methods. Please note that you are not allowed to
exchange copyright-protected material.
To edit a video clip
1. } My Items } Videos } Open and choose the video clip
you want to open.
2. } More } Edit } Edit to Trim, Replace or Delete a clip
from the current movie.
Note: You cannot send a polyphonic melody or an MP3 file
in a text message.
To send a melody
To edit a picture
1. } My Items } Sounds and select a melody.
1. } Entertainment } VideoDJ™.
2. } Add } Picture. Choose the picture you want to edit and
} Select.
2. } More } Send and select a transfer method.
To receive a melody
3. } Edit.
1. Open the message you received the melody in, or turn on
Bluetooth or the infrared port if these transfer methods are
being used to send the melody.
2. When you receive the melody, follow the instructions that
appear on the screen.
4. } Replace to replace a picture, } Duration to change the
picture duration in the movie or } Delete to delete the picture
from the current movie.
To edit text
} Edit to change a text string, } Background to change
the text background, } Text colour to change the font colour,
} Duration to change the duration of the text in the movie or
} Delete to delete the text from the current movie.
Creating movies
With the VideoDJ™, you can create movies by combining video
clips and pictures that you have saved in your phone. You can
also use VideoDJ™ to trim video clips and edit video items.
This is the Internet version of the user's guide. © Print only for private use.
51
Pictures and sounds
VideoDJ™ options
When a movie is selected, } More to view more options:
Sound recorder
With the sound recorder, you can record either your own memos
or calls. Recorded sounds can also be set as ringtones. Recording
of a conversation is stopped if a participant ends the call.
Recording of all sounds stops automatically if you receive a call.
If the recordings are saved in the phone they can be accessed
even if you change your SIM card.
• Preview – to view the movie.
• Insert – to insert an item.
• Save – to save the current movie.
• Send – to send the current movie.
• New – to open another movie.
• Soundtrack – to add a soundtrack to the current movie.
Note: In some countries or states it is required by law that you
inform the other person before recording the call.
Sending and receiving movies
You can send a movie using one of the available transfer methods.
Short movies can be sent using MMS. If a movie is too long,
you can use the Trim function to make a movie shorter.
To start a sound recording
1. } Entertainment } Record sound.
2. Wait until you hear a tone. When the recording starts,
Recording is displayed together with the time of the current
recording (increasing).
3. } Save to end the recording, and } Play to listen to the
recording. } More to view the following options: Record
new, Send, Rename, Delete, Recorded sounds.
Movies that you receive and save are saved in messenger.
To trim a video clip
1. Select a video from the storyboard } Edit } Trim.
2. } Set to set the start point and } Start.
3. } Set to set the end point and } End.
4. You can repeat steps 2 and 3 until you are satisfied. } Done
to finish the trim.
To listen to your recordings
1. } My Items } Sounds and select the recording you want
to hear.
2. } Play to listen to the recording and } Stop to stop playback.
52
This is the Internet version of the user's guide. © Print only for private use.
Vodafone live! and Internet
Vodafone live! services
Vodafone live! and Internet
• More sounds – download sounds and ringtones.
• More pictures – download pictures, animations and
wallpaper.
• More games – download new games to your phone.
• Video & Audio – download or stream video and music clips.
• More themes – download a new look for your phone’s menus.
• Media Album – online storage for your pictures and sounds.
• Boîte Mail – a single mailbox for all your email messages,
voicemail and faxes.
Vodafone live! offers pictures, video clips, ringtones and games
all of which can be easily downloaded with the Internet browser.
Use the media player to stream video and sound to your phone,
and play and organize your video and sound files.
Vodafone live!
• Messenger – instant messaging on your mobile.
• News – get the latest news reports and weather forecasts.
• Sport – news, results, and latest scores.
Vodafone live! Has everything you need, full of information
downloads, games, music and services. It is easy to use, and
because the GPRS or even faster 3G connection can be “always
on” there is no wait for dialling up. You pay only for data you
send or receive, not for how long you are connected.
• Search – find what you need in Vodafone live!.
Tip! Vodafone live! is growing and changing all the time, so
these options may vary. Keep checking it out to see what’s new.
Connect to Vodafone live!
Note: Questions about Vodafone! live products and services
should be directed to your network operator.
Press and hold the
connect to the Vodafone live! main menu. To exit, press and
hold
Vodafone live! key (in standby) to
.
Internet
Setting up Internet and Email
In order to use the Internet, and send and receive picture and
email messages or Messenger, you need the following:
You can also go to the Vodafone live! offline Web page
} Vodafone live!. This menu is offline, so you will not be
connected until you choose a link. The following describes
some of the services you can choose:
This is the Internet version of the user's guide. © Print only for private use.
53
Vodafone live! and Internet
• A phone subscription that supports data transmission.
• Settings entered in your phone.
• You may also have to register as an Internet and email user
with your network operator.
To stop browsing
} More } Exit browser.
Options when browsing
} More to view different browsing options. The options may
vary depending on which site you are visiting.
However, your phone has already been customized to give access
to Vodafone live!. You should already be registered, and do not
need to change or configure any settings. If you have problems
connecting to Vodafone live!, the Internet or using email, please
contact your local network operator service.
Note: If you select an email address when browsing a Web site,
you can send a text message to that address.
The options menu always contains the following:
Using Internet
Your phone has a browser that uses WAP (Wireless Application
Protocol) or HTTP (Hyper Text Transfer Protocol) to access the
Internet.
• Exit browser – disconnect and go to standby.
• Go to the homepage set for the current Internet profile,
for example, Sony Ericsson.
• Bookmarks – add the site you are currently browsing to
your list of bookmarks, or view the list of bookmarks. A list
of ongoing or suspended downloads may be shown.
• Enter address – enter the Web page address of a site you
want to visit. } New address to enter a new Web page
address or select one of the 10 latest entered addresses.
When you enter a Web page address, the normal http://
prefix is not needed.
To select an Internet profile
} Settings } the Connectivity tab } Internet settings
} Internet profiles and select the profile you want to use.
Use
or
to scroll between the tabs.
To start browsing
} Vodafone live! and select a service or } Vodafone live!
} More and select an option and press
• History – list of previously visited sites.
to open that page.
• Refresh page – refresh the contents of the Web page.
• Save – save the Web page or a picture from the current
Web page.
Press
options.
to go back a page. } More to view more browsing
54
This is the Internet version of the user's guide. © Print only for private use.
Vodafone live! and Internet
• Send link – send a link to the current site to another phone. 1. Press and hold the Vodafone live! key on your phone. This
• Appearance – select to play the sounds or show the pictures
on visited pages.
• Clear cache – clear all temporary stored Internet files saved
in the phone.
• Status – display current status information, for example,
profile, access type, security, address.
• Make a call – if your subscription supports it, you can
make a call while browsing the Internet. } More } End call
to end the call and continue browsing.
will connect you directly to Vodafone live!.
2. Click on the Downloads link, and choose the item you want
to download. Follow the instructions to start downloading.
3. Your phone will automatically guide you through the process
of installing your downloaded items.
More download options
You can also download via My Items } Pictures or Sounds.
Selecting More Pictures will connect you directly to the Image
Download section of Vodafone live! (for wallpapers, etc.). More
Sounds connects you to the Sound Download section (for
ringtones, etc.). You can download games via Games } More
games. This connects you to the Games Download section.
Note: If you highlight an email address when browsing a Web site,
you can send a text message to that address.
Using bookmarks
You use bookmarks in your mobile phone just as you do with a
computer Internet browser. You can create and edit bookmarks.
Stored information
When browsing, you can save information in your phone.
To work with bookmarks
Note: It is advisable to clear any sensitive information about
previously visited Internet services. This is to avoid a security
risk if your phone is misplaced, lost or stolen.
1. } Vodafone live! } More } Bookmarks and select
a bookmark } More.
2. Select an option.
• The following information can be saved:
• Cookies – improve site access efficiency.
• Passwords – improve server access efficiency.
Downloading
You can download, for example, pictures, themes, games and
ringtones from Vodafone live! directly to the My Items in your
phone.
This is the Internet version of the user's guide. © Print only for private use.
55
Vodafone live! and Internet
To allow or clear cookies in your phone
Select the HTTP profile you want to use Java™
applications
You can run Java™ applications on your phone. Games and
other Java applications can be downloaded to your phone from
the Internet.
} Settings } the Connectivity tab } Internet settings
} Cookies and select an option and confirm. Use
to scroll between the tabs.
or
To clear the password list
Java application security
} Settings } the Connectivity tab } Internet settings
} Clear passwords and } Yes to confirm. Use
to scroll between the tabs.
Java applications are automatically installed as “Trusted” or
“Untrusted”. Trusted applications are allowed to, for example,
connect to networks, send messages or use the camera without
asking for permission. Untrusted applications, however, must
always confirm such actions with you first. You can set different
permission levels for your Java applications.
or
Internet profile for Java™ applications
Some Java™ applications need to connect to the Internet to
receive information, for example, games that download new
levels from a game server.
To set permissions for a Java™ application
1. } My Items } Applications or } Games.
2. Select an application or a game } More } Permissions.
3. Select one of the listed options.
4. } No, Always ask or Ask once to set the permission level
you want for the selcted application.
You need an HTTP Internet profile to allow Java™ applications
to connect to the Internet. Please contact your network operator
or service provider for the correct settings.
To select a profile for Java™
Java application screen size
} Settings } the Connectivity tab } Settings for Java™
} Internet profiles. Use
Some Java applications are designed for a specific screen size.
In some cases, applications may not be able to start because
the phone cannot adapt the application to the screen. Contact
the application vendor to find out what screen size the application
is designed for, and change the screen settings for the
application in the phone.
or
to scroll between the tabs.
56
This is the Internet version of the user's guide. © Print only for private use.
Vodafone live! and Internet
To set the screen size for a Java application
Trusted certificates
To establish a secure connection when using certain Internet
services, for example, banking, you need certificates in your
phone.
1. } My Items } Applications or } Games.
2. Select an application or a game } More } Screen size.
3. Select one of the listed options. If you selected User
defined you can edit the Width: and Height: values.
Trusted certificates are used to verify the WAP gateway or the
HTTP server that you are connecting to. Your phone may already
contain trusted certificates when you buy it. You can also
download new certificates using the browser.
Internet security
Your phone has support for both WAP and HTTP secure browsing.
To activate a secure connection to the WAP gateway, you need
to turn on security in your Internet profile. If your Internet profile
is an HTTP profile, the connection will be secure if the URL
for HTTP profiles.
To check the certificates in your phone
} Settings } the Connectivity tab } Internet settings
} Security } Trusted cert. Use
the tabs.
or
to scroll between
Note: Security for a connection between a WAP gateway and
a WAP service provider is the responsibility of the WAP service
provider.
Downloading
Change your phone whenever you want by downloading new
polyphonic ringtones, videos, games, and applications from
Vodafone live!.
To turn on a secure connection (WAP)
1. } Settings } the Connectivity tab } Internet settings
} Internet profiles and select a profile } More } Settings.
When the 3G icon is displayed, you will notice an immediate
difference - downloads are significantly faster.
Use
or
to scroll between the tabs.
2. Turn on security.
To download games
1. } Entertainment } Games } More games.
2. Follow the instructions on the screen.
This is the Internet version of the user's guide. © Print only for private use.
57
Vodafone live! and Internet
Album Photo
Picture upload
With Vodafone live! you can save pictures in a Web-based
album. This is useful if you are running out of phone memory,
or if you wish to share your pictures with friends in a virtual
album that they (and you) can access on the Web. You can
upload a picture in three ways.
Media Player
The media player works as a music player and video player
all in one. You can play music and video clips that you receive
in a picture message, or that you download to your phone.
The following file types are supported by the media player:
MP3, MP4, 3GP, AAC, AMR, MIDI, WAV (with 16 kHz as
maximum sample rate) and Real®8. You can also stream
music and videos from Web sites.
To upload a picture
Playlists
• } My Items } Pictures, select a picture, More } Send
To organize the media files that are stored in the My Items you
can create playlists. A playlist can contain music as well as
video clips. Files in a playlist can be sorted by artist, title or by
the order in which the files were added to the playlist. You can
add a file to more than one playlist.
} Album Photo.
• From the camera,
} Send } Album Photo
• You can also upload a message by selecting a folder in
Messages, highlight a message, More } Album Photo.
To download a picture
The playlists All music and All videos are automatically
generated and contain all music and video files that are saved
in the phone memory. You cannot delete or rename these playlists.
1. } My Items } Pictures } More Pictures.
2. If settings are not already in your phone %54 Setting up
Internet and Email.
Note: When you delete a playlist or a file from the playlist, it is
not deleted permanently from the phone memory. You can add
the file to another playlist.
Note: This feature is not available in the handset for all
countries.
58
This is the Internet version of the user's guide. © Print only for private use.
Vodafone live! and Internet
To create a playlist
To change play mode
1. } Media Player } New playlist enter the name of the
playlist } OK.
2. Select among the files that are available in My Items. You
can add several files at a time and you also add folders. All
files in the selected folders will be added to the playlist.
} Media Player } More } Play mode. Select Shuffle on to
play the playlist files in random order, or Loop on to restart the
playlist when the last file has been played. You can also change
the play mode from within the playlists.
Note: You can also play individual media files from the Sounds
folder in My Items. However, you can only play playlists from
the media player application.
To add files to a playlist
1. } Media Player select a playlist } Open } More
} Add media.
2. Select among the files that are available in My Items.
Media player control
• } Pause to pause the playback.
• Press
or
to go forward or back to the next music
To remove files from a playlist
track or video clip.
• Press and hold
} Media Player select a playlist } Open. Select the file
} More } Delete.
or
to fast forward or rewind.
• Press
and
to scroll through the playlist during
playback. Files that are highlighted will not be selected until
To delete playlists
you press } Stop } Play.
} Media Player select a playlist } More } Delete playlist.
• When a video clip is paused, press
one frame at a time.
to play the video clip
Music and video clips
Media player options
To play music and videos
• } More to view the following options:
• Play mode – change the playback order of songs and
videos. Select Loop or Shuffle.
} Media Player and select a playlist } Open } Play. The
playlist keeps on playing until you } Pause or } Stop.
• Equalizer – change the settings of the treble and bass
when playing music.
This is the Internet version of the user's guide. © Print only for private use.
59
Vodafone live! and Internet
• Rename – rename the playlist. You can only rename user-
created playlists.
• Delete playlist – delete the playlist. Only the playlist is
deleted; the files are still listed in the My Items. You can
only delete user-created playlists.
Online music and videos
You can view videos and listen to music that you find on a Web
site by streaming them to your phone. When browsing and when
you have found a link for streaming, the media player will open
automatically when the link is selected.
Media options
When you have opened a playlist, } More to view the following
options:
In order to stream you must have a data account and the links
compatible. Your phone may be pre-configured with a data
account. If it is not, please contact your network operator
service %68 Settings.
• Information – view information about the current track
or video.
• Add media – add files or folders to the playlist.
• Minimize – minimize the media player and return to standby.
The music or video continues to play and you can use other
applications and functions in the phone.
• Play mode – change the playback order of songs and
videos.
To select a data account
1. } Settings } the Connectivity tab } Streaming
settings. Use
or
to scroll between the tabs.
2. Select the data account you want to use.
To stream video and audio
• Equalizer – change the settings of the treble and bass
1. } Vodafone live! } More } Enter address.
2. Enter or choose the address to a site and select a link to
stream from.
when playing music.
• Sort – sort the playlist by artist, title or by the order in which
files were added to the playlist.
• Send – send a sound or video file.
To stream saved music and videos
• Delete – remove the file from the playlist.
• Fullscreen – play the video clip in full screen and in
horizontal mode.
1. } Vodafone live! } More } Bookmarks.
2. Select a link to stream. The media player will open and play
the streamed music or video.
• Capture frame – capture a picture from the video clip.
60
This is the Internet version of the user's guide. © Print only for private use.
Connectivity
You can also synchronize with programs on the Internet using
WAP or HTTP (remote synchronization with Internet services).
Connectivity
Note: When using USB, make sure you only use the USB cable
that comes with the phone.
You can connect your phone using Bluetooth™ wireless
technology, the infrared port or by using the USB cable that
comes with the phone.
To select sync order for names
When your phone is connected to another device, for example
a PC or another phone, you can synchronize contacts and
calendar items, or transfer content between the phone and the
PC or between the phones.
} Contacts } Options } Advanced } Sync. order to select
the order in which first and last name appear in the phone when
you synchronize contacts.
Synchronization with nearby devices
You can use Bluetooth wireless technology to connect accessories
to your phone, for example portable handsfree equipment.
Install the computer synchronization software from the CD that
comes with your phone or download it from your network
operator’s Web site. For detailed information, please refer to
the computer synchronization software help.
Synchronizing
Remote synchronization with Internet programs
Contact your network operator for more information about the
to receive username, password and addresses for the different
programs. You must also have an Internet profile set in your
mobile phone %68 Settings.
You can synchronize your phone contacts, appointments, tasks
and notes with similar programs in, for example, a computer
or mobile phone using Bluetooth, the infrared port or the USB
cable (synchronization with nearby devices). Synchronization
software for your computer is available on the CD that comes
with the phone, or you can download it from your network
operator’s Web site.
This is the Internet version of the user's guide. © Print only for private use.
61
Connectivity
To enter the remote synchronization settings
Bluetooth™ wireless technology
1. } Organiser & Tools } Synchronization } New account.
If you do not have an account, you will be asked if you want
to create an account. } Yes to create a new account.
2. Enter a name for the new account } Continue. A list of
items to enter will appear. Add the server address of the
synchronization server, a server username and a server
password. } OK when you have entered each setting.
3. } Connection and select the WAP or HTTP profile that
you want to use for the synchronization.
Your phone has built-in Bluetooth which makes it possible for
you to connect your phone wirelessly to other Bluetooth devices.
You are able to be connected to several Bluetooth devices at
the same time. You can automatically synchronize information
in your phone and your computer and use the remote control
functionality to control applications on your computer. You can
also exchange, for example, business cards, calendar items
and pictures.
4. } Remote initiation to set whether to allow the
synchronization server or other device to initiate a
synchronization or not. You can also choose to always
be asked.
Note: We recommend that your phone and the Bluetooth device
you are communicating with are within a range of 10 metres.
The connection may be improved if there are no solid objects
between your phone and the other Bluetooth device.
5. } Sync. interval to set how often you want the phone to
automatically connect to the server and start syncronization.
6. } Applications and select the applications that you want to
synchronize, for example, Contacts } OK.
7. } App. settings and select an application. Enter the name
of the database and, if required, your username and
password } OK.
Bluetooth range
Your phone can communicate with other Bluetooth devices
within a range of up to 10 to 20 metres. The connection may
be improved if there are no solid objects in between your phone
and the other Bluetooth device.
Before you start
8. Press
} Save to save your new account.
To communicate with another Bluetooth device, you first need
to turn Bluetooth on. You then need to add the device to the list
of devices in your phone. You can exchange items, use a remote
screen and play games without adding the device to the list.
To start the remote synchronization
} Organiser & Tools } Synchronization and select a remote
account } Start.
62
This is the Internet version of the user's guide. © Print only for private use.
Connectivity
you also need to install software on your computer from the CD
that comes with your phone, or download it from your network
operator’s Web site %61 Synchronizing.
To organize your list of devices
1. } Settings } the Connectivity tab } Bluetooth
} My devices and select a device from the list.
Use
or
to scroll between the tabs.
2. } More to view a list of options.
Note: Please check if local laws or regulations restrict the use
of Bluetooth. If Bluetooth is not allowed, you must ensure that
the Bluetooth function is turned off. The maximum allowed
Bluetooth radio output power in the phone is automatically
adjusted according to possible local restrictions. This means
that the range may vary.
Phone name
Choose a unique name for your phone. This name is shown
in other devices when your phone is found.
To enter a phone name
To turn Bluetooth on
} Settings } the Connectivity tab } Bluetooth
} Phone name. Use
or
to scroll between the tabs.
} Settings } the Connectivity tab } Bluetooth } Turn on.
Use
or
to scroll between the tabs.
Visibility
To add a device to your phone
In order for your phone to be found when searched for by other
Bluetooth devices, you must make sure that Bluetooth is turned
on and your phone is visible to other devices.
1. } Settings } the Connectivity tab. Use
between the tabs.
or
to scroll
2. } Bluetooth } My devices } New device. The Bluetooth
function of the other device must also be on and not hidden.
3. } Add and your phone will search for all types of available
Bluetooth devices.
To hide or show your phone when using Bluetooth
1. } Settings } the Connectivity tab } Bluetooth
} Visibility. Use
or
to scroll between the tabs.
4. A list of available devices is displayed. Select a device.
5. If the device you are adding to your phone has its own
passcode, enter this passcode in your phone. If not, create
a passcode of digits yourself and enter it in both devices.
2. } Show phone or Hide phone.
This is the Internet version of the user's guide. © Print only for private use.
63
Connectivity
Sending and receiving
To send or receive an item using Bluetooth, you need to make
sure that the devices are within range.
3. If you already have a handsfree in your list of devices,
} Settings } the Connectivity tab } Bluetooth
} Handsfree } My handsfree } New handsfree
} Add. You should ensure that your Bluetooth handsfree
is in pairing mode.
After you select Bluetooth as the transfer method for sending,
a list of possible receiving devices is presented.
Transferring sound
To send an item (example: a contact)
When you are using a Bluetooth handsfree with your phone,
you can choose to transfer the sound either to the phone or to
another handsfree device that has been added to your phone.
1. } Contacts and select a contact, } More } Send contact
} Via Bluetooth. The phone searches for devices.
2. Select the device you want to send the item to } Select.
To transfer sound when using a handsfree
To receive an item
During a call, press
} Transfer sound.
1. } Settings } the Connectivity tab. Use
between the tabs.
or
to scroll
Directing sound
You can select where the sound should be handled when
answering an incoming call with the keypad on the phone.
If you use the button on the handsfree, the sound will always
be in the handsfree.
2. } Bluetooth } Turn on.
3. Make sure that your phone is visible to other devices
Bluetooth } Visibility } Show phone. When you receive
the item, follow the instructions that appear on the screen.
To direct sound when answering a call with a handsfree
To add a Bluetooth handsfree to your phone
1. } Settings } the Connectivity tab } Bluetooth
} Handsfree } Incoming call. Use
scroll between the tabs.
2. } In phone if you always want to have the sound in the
phone or In handsfree if you want to direct the sound to the
handsfree.
1. } Settings } the Connectivity tab } Bluetooth
} Handsfree. Use
2. The first time you add a handsfree, Add a handsfree
or
to
or
to scroll between the tabs.
device to use with the phone? is displayed } Yes.
6 4
This is the Internet version of the user's guide. © Print only for private use.
Connectivity
Remote control
You can use your phone as a remote control device to control
Infrared port
and a computer or another device equipped with an infrared
port. You can, for example, synchronize calendar items,
%61 Synchronizing, transfer files between your phone and
a computer, and send items such as pictures and contacts.
®
computer applications such as a media player or Microsoft
®
PowerPoint presentations. Your computer must support the
Bluetooth HID Profile.
To select remote control
1. } Entertainment } Remote control.
2. Select the application you want to use and the computer you
want to connect to.
Note: If you are connecting to a computer, please refer to its
user documentation. Make sure that the infrared speed in the
computer is set to 115200 bps.
File transfer using Bluetooth
To turn the infrared port on
You can use a computer to view and transfer content in My Items.
Install the My Items software using the CD that comes with your
phone, or download the software from your network operator’s
Web site. You can use the drag-and-drop function of your
computer to:
1. } Settings } the Connectivity tab. Use
between the tabs.
2. } Infrared port } On or } 10 minutes to turn on infrared
for 10 minutes only.
or
to scroll
• Transfer files between your phone and the computer.
• Delete files.
Note: Your computer needs to have one of the following
operating systems to be able to use this feature: Windows®
2000, Windows ME, Windows XP and Mac OS X.
This is the Internet version of the user's guide. © Print only for private use.
65
Connectivity
To connect two devices
Web site. You can use the drag-and-drop function of your
computer to:
• Transfer files between your phone and the computer.
• Delete files.
Note: Your computer needs to have one of the following
2000, Windows ME, Windows XP and Mac OS X.
To synchronize your phone with nearby devices
%61 Synchronizing.
1. Turn on the infrared port of both devices.
2. Make sure that the infrared port on your phone faces the
infrared port on the other device.
3. Your phone now establishes contact with the other device.
Transferring files using the USB cable
You can connect your phone to a computer using the USB
cable. Install the USB cable software using the CD that comes
with your phone, or download the drivers from your network
operator’s Web site.
To send an item using the infrared port
(example: a contact)
1. Make sure that the infrared ports of both devices are on.
} Contacts and select a contact.
2. } More } Send contact } Via infrared.
Note: Make sure you use only the USB cable that comes with
the phone, and that you connect the USB cable direct to your
computer.
File transfer using the infrared port
You can use a computer to view and transfer content in My Items.
Install the My Items software using the CD that comes with your
phone, or download the software from your network operator’s
66
This is the Internet version of the user's guide. © Print only for private use.
Settings
File transfer using the USB cable
Settings
You can use a computer to view and transfer content in My Items.
Install the My items software using the CD that comes with your
phone, or download the software from your network operator’s
Web site. You can use the drag-and-drop functionality in your
computer to:
You can use settings to personalize your phone by changing the
appearance of the screen and changing the ringtone.
You can also use settings to protect your phone from
• Transfer files between your phone and the computer.
• Delete files.
unauthorized use. Use the SIM card or phone lock features.
Note: Your computer needs to have one of the following
2000, Windows ME and Windows XP.
Setup wizard
You can use the setup wizard to help you get started with the
basic settings in your phone. If you do not want help the first
time you turn on your phone, you can choose to use the wizard
later. You can also select to start the wizard from the menu
system at any time. The wizard gives you tips on how to use the
keypad and guides you through some basic settings.
To synchronize your phone with nearby devices
%61 Synchronizing.
To start the setup wizard from the menu system
1. } Settings } the General tab } Setup wizard.
2. Select language for your phone.
3. To use the wizard } Yes and follow the instructions that
appear to complete the setup.
This is the Internet version of the user's guide. © Print only for private use.
67
Settings
To save power
Time and date
The time is always displayed in standby.
} Settings } the Connectivity tab } Bluetooth } Power save
} On. Use
or
to scroll between the tabs.
To set the time and date
• } Settings } the General tab } Time & date } Time.
Enter the time } Save.
• To set the time format (12-hour or 24-hour clock) } Format
and select an option.
• You can set the date and date format in } Settings
} the General tab } Time & date } Date.
Themes
You can change the appearance of the screen, for example, the
colours and wallpaper, by using themes. Your phone comes with
some predefined themes. You cannot delete these, but you can
download new themes from Vodafone live!.
To select or change a theme
Start-up screen and power save
} My Items } Themes and select a theme.
When you turn your phone on, the start-up screen appears.
You can also set your own start-up screen.
Exchanging themes
You can exchange themes using one of the available transfer
methods.
You can choose to turn power save on or off if you do not want
to use several Bluetooth functions at the same time. If you turn
it on, the phone will save power and it will prevent other devices
from connecting to your phone when you are already connected
to one.
To send a theme
1. } My Items } Themes and select a theme.
2. } More } Send and select a transfer method.
To download a theme
To select a start-up screen
1. } My Items } Themes } More themes.
2. Follow the instructions on the screen.
} Settings } the Display tab } Start-up screen and select
an option for the start-up screen. Use
the tabs.
or
to scroll between
68
This is the Internet version of the user's guide. © Print only for private use.
Settings
To receive and save a theme
To turn the ringtone on or off
1. Open the message you received the theme in, or turn on
Bluetooth or the infrared port if these transfer methods are
being used to send the theme.
2. When you receive the item, follow the instructions that
appear on the screen.
Press and hold
alarm signal are turned on or off.
from standby. All signals except the
To set the ringtone volume
1. } Settings } the Sounds & alerts tab. Use
to scroll between the tabs.
2. } Ring volume and press
increase the volume.
3. } Save to save the setting.
or
or
to decrease or
Ringtones and melodies
Your phone comes with a number of standard and polyphonic
melodies that can be used as ringtones. You can exchange
note that you are not allowed to exchange copyright-protected
material. You can also record a sound and use it as a ringtone,
%52 To start a sound recording.
To download a ringtone
1. } My Items } Sounds } More Sounds.
2. Follow the instructions on the screen.
Caller-specific ringtones
If your subscription includes the Calling Line Identification
(CLI) service, you can assign a personal ringtone to callers,
%23 To add a picture or a ringtone to a phone contact.
Note: If you want to use an MP3 file as a ringtone, you can only
use some copyright-protected files specially designed as
ringtones. Please consult your network operator for more
information. If you select an MP3 file as a ringtone, you cannot
use voice answering, %28 Voice answering. Select a file type
other than MP3 to be able to use voice answering.
Vibrating alert
You can choose to be notified of an incoming call by the buzzing
of the vibrating alert. You can set:
To select a ringtone
• On – all the time.
• On if in Silent – on when the ring volume is turned off
or when you have set the phone to silent.
• Off – all the time.
} Settings } the Sounds & alerts tab } Ringtone. Use
or
to scroll between the tabs.
This is the Internet version of the user's guide. © Print only for private use.
69
Settings
To set the vibrating alert
To rename a profile
Settings } the Sounds & alerts tab } Vibrating alert and
select the setting you want. Use
tabs.
} Settings } the General tab } Profiles } Edit profile
} Profile name. You cannot rename the normal profile.
or
to scroll between the
SIM card lock
The SIM card lock protects your subscription, but not your phone
itself, from unauthorized use. If you change SIM cards, your
phone still works with the new SIM card.
Sounds and alerts options
From Settings and the Sounds & alerts tab, you can set:
• Message alert – select how you want to be notified of an
incoming message.
• Key sound – select what sound you want the keys to make
when you press them.
Most SIM cards are locked at the time of purchase. If the SIM
card lock is on, you have to enter a PIN (Personal Identification
Number) every time you turn on your phone.
Profiles
If you enter your PIN incorrectly three times in a row, the SIM
card is blocked. This is indicated by the message PIN blocked.
To unblock it, you need to enter your PUK (Personal Unblocking
Key). Your PIN and PUK are supplied by your network operator.
You can edit your PIN and select a new four- to eight-digit PIN.
Your phone has predefined profiles that are set to suit a certain
environment. You can reset all profile settings to the way they
were set when you bought your phone.
To select a profile
Note: If the message Codes do not match appears when you
edit your PIN, you entered the new PIN incorrectly. If the message
Wrong PIN appears, followed by Old PIN:, you entered your
old PIN incorrectly.
} Settings } the General tab } Profiles } Select profile.
To change a profile setting
} Settings } the General tab } Profiles } Edit profile and
select the setting that you want to change.
70
This is the Internet version of the user's guide. © Print only for private use.
Settings
To unblock your SIM card
To set the automatic keylock
1. When PIN blocked is displayed, enter your PUK } OK.
2. Enter a new four- to eight-digit PIN } OK.
3. Re-enter the new PIN to confirm } OK.
} Settings } the General tab } Locks } Automatic keylock.
To lock the keypad manually
In standby press
} Lock keys.
To edit your PIN
You can still answer an incoming call and the keypad locks again
after the call. The keypad remains locked until you unlock it
manually.
1. } Settings } the General tab } Locks } SIM lock
} Change PIN.
2. Enter your PIN } OK.
3. Enter a new four- to eight-digit PIN } OK.
4. Re-enter the new PIN to confirm } OK.
To unlock the keypad, press
} Unlock.
To turn the SIM card lock on or off
Phone lock
The phone lock protects your phone against unauthorized use if
it is stolen and the SIM card is exchanged. You can change the
phone lock code (0000) to any four- to eight-digit personal code.
1. } Settings } the General tab } Locks } SIM lock
} Protection and select On or Off.
2. Enter your PIN } OK.
Automatic phone lock
Keypad lock
If the phone lock is set to automatic, you do not need to enter
your phone lock code until a different SIM card is inserted in the
phone.
You can lock the keypad to avoid dialling a number by accident.
Note: Calls to the international emergency number 112 can still
be made, even when the keypad is locked.
Note: It is important that you remember your new code. If you
should forget it, you have to hand in your phone to your local
Sony Ericsson retailer.
Automatic keylock
In standby, automatic keylock means the keypad is locked
a short while after you last press a key.
This is the Internet version of the user's guide. © Print only for private use.
71
More features
To set the phone lock
More features
1. } Settings } the General tab } Locks } Phone lock
} Protection and select an alternative.
This chapter lists a number of useful features that are available
to you. For example, learn how to use the calendar and how to
use tasks.
2. Enter the phone lock code } OK.
To unlock the phone
If the phone lock is on, enter your code } OK.
You will also receive instructions on how to use the timer, the
alarm clock, notes and the calculator. Included in the phone is
also a feature that allows you to remember all your codes; the
code memo.
To edit your phone lock code
} Settings } the General tab } Locks } Phone lock
} Change code.
Calendar
You can use the calendar to keep track of important meetings.
The calendar can be synchronized with a computer calendar
or with a calendar on the Web, %61 Synchronizing.
Appointments
You can choose to add a new appointment or use an old one as
a template by copying and editing it. You can also set reminders
for appointments.
To add a new appointment
1. } Organiser & Tools } Calendar and highlight the date
for the appointment } Select } New appointment } Add.
2. Enter details and confirm each entry.
72
This is the Internet version of the user's guide. © Print only for private use.
More features
To view an appointment
Back a year
Today’s date
Next year
1. } Organiser & Tools } Calendar and select a day on
which you have an appointment (marked in bold).
2. Scroll to the appointment } View.
Calendar settings
} Organiser & Tools } Calendar } More and select an option.
To view your calendar content
} Organiser & Tools } Calendar. Days on which you have
appointments are marked in bold. } More } View week to
view a certain week.
• View week – select, add, edit or delete appointments.
• New appointment – add a new appointment.
• Change date – change the date of your calendar.
• Advanced – for options to find, delete all, set reminders
or select a start day for the week.
To set when reminders should sound
1. } Organiser & Tools } Calendar } More } Advanced
} Reminders.
Exchanging appointments
2. } Always if you want the reminder to sound even though
the phone is turned off. When the reminder sounds } Yes
to read the appointment. } No to turn off the reminder.
A reminders option set in the calendar affects a reminders
option set in tasks.
You can send and receive appointments using one of the
available transfer methods.
To send an appointment
In the list of appointments for a certain day, select the item you
want to send } More } Send and select a transfer method.
Navigating in your calendar
Use the navigation key to move between days or weeks. In the
monthly and weekly views, you can also use the keypad as
follows:
Tasks
You can keep track of phone calls you need to make or tasks
that you need to do. You can choose to add a new task or use
an old one as a template by copying and editing it. You can also
set a reminder for a task.
Back a week
Back a month
Next week
Next month
This is the Internet version of the user's guide. © Print only for private use.
73
More features
To add a new task
To send a task
1. } Organiser & Tools } Tasks } New task } Add.
2. Select a category. If the category is a phone call, enter the
phone number } Continue.
1. In the list of tasks for a certain day, select the item you want
to send } More } Send.
2. Select a transfer method.
3. Enter a subject } Continue.
4. If you want to set a reminder for your task } Yes.
More useful features
Alarm clock
The alarm can be set to ring at a specific time within 24 hours,
or recurrently at a specific time on several days. You can have
both these alarms set at the same time. The alarm signal rings
even if the phone is set to silent or turned off. The alarm can
use the radio as an alarm signal.
To view a task
} Organiser & Tools } Tasks and select a task } View.
To set when reminders should sound
1. } Organiser & Tools } Tasks and select a task } More
} Reminders.
2. } Always if you want the reminder to sound even though
the phone is turned off. When the reminder sounds } Yes to
read the task, or to call the phone number in a phone task.
} No to turn off the reminder. A reminders option set in
tasks affects a reminders option set in the calendar.
To set an alarm
} Organiser & Tools } Alarms } Alarm and enter the time
} Save.
Using the alarm
• To change the alarm time } Organiser & Tools } Alarms
} Alarm and enter a new time.
• To turn the alarm signal off when it rings, press any key
(if radio is selected as alarm signal } Snooze). If you do
not want the alarm to be repeated } Turn off.
• To cancel the alarm } Organiser & Tools } Alarms
} Alarm } Turn off.
Exchanging tasks
You can send and receive tasks using one of the available
transfer methods. You can also synchronize tasks with
a computer, %61 Synchronizing.
74
This is the Internet version of the user's guide. © Print only for private use.
More features
• To set a recurrent alarm } Organiser & Tools } Alarms
} Recurrent alarm. Enter the time } Continue and select
the days that you want the alarm to recur on by scrolling and
pressing Mark. } Done to exit the menu.
To send a note
} Organiser & Tools } Notes and select the note that you
want to send } More } Send and select a transfer method.
• To select an alarm signal } Organiser & Tools } Alarms
} Alarm signal. Select Radio or Sounds.
Stopwatch
Your phone has a stopwatch that can save several laps. The
stopwatch continues to run when you answer an incoming call.
Note: If you choose Radio as the alarm signal, please make
sure that the handsfree is connected to the phone.
To use the stopwatch
Notes
1. } Organiser & Tools } Stopwatch } Start.
2. } Stop or } New lap if you want a lap time.
3. To reset the stopwatch } Reset.
If you need to remember something, you can make a note of it
in your phone.
Timer
To add a note
To set the timer
} Organiser & Tools } Notes } New note } Add and enter
the note } Save.
} Organiser & Tools } Timer and enter the hours, minutes
and seconds after which you want the timer to go off. When the
signal rings, press any key to turn it off.
To handle notes
1. } Organiser & Tools } Notes and a list of notes appears.
2. Select the note that you want to handle. } More to edit,
show a note in standby (or hide it), send or delete a note.
Brightness
You can adjust the brightness of the screen.
Exchanging notes
To set the brightness
You can send and receive notes using one of the available
transfer methods. You can also synchronize notes with a
computer, %61 Synchronizing.
} Settings } the Display tab } Brightness. Use
to scroll between the tabs.
or
This is the Internet version of the user's guide. © Print only for private use.
75
More features
Start-up menu
When the start-up menu is activated, you can select to listen
to music only instead of using the phone with full functionality.
All transmitters of the phone are then turned off in order not to
disturb sensitive equipment, for example, in an aeroplane or in
a hospital. You cannot make or receive any calls, send
messages etc. You can use the media player only.
To use the calculator
} Organiser & Tools } Calculator.
• Press
• Press
• Press
or
to select ÷ x - + . % =.
to delete the figure.
to enter a decimal point.
Code memo
To activate the start-up menu
Instead of having to remember security codes for credit cards,
for example, you can save them in the code memo in your
phone. All you need to remember is the passcode to open the
code memo.
1. } Settings } the General tab } Start-up menu.
2. Select Show.
3. Turn off the phone.
4. Turn on the phone. Two options appear.
5. Select Music only to start using the media player. If you want
to use the phone with full functionality, select Start phone.
Checkword and security
To confirm that you have entered the correct passcode for the
code memo and to prevent unauthorized access to your codes,
you must enter a checkword.
To deactivate the start-up menu
When you enter your passcode to open the code memo, the
checkword is shown for a short time. If the passcode is correct,
the correct codes are shown. If you enter the incorrect passcode,
the checkword and the codes that are shown are also incorrect.
1. } Settings } the General tab } Start-up menu.
2. Select Don’t show.
Note: If you have selected Music only, you can still receive
calendar and task reminders, and the alarm signal can still ring.
To open code memo for the first time
Calculator
The calculator can add, subtract, divide and multiply.
1. } Organiser & Tools } Code memo. A message with
instructions is displayed } Continue.
2. Enter a four-digit passcode to open code memo } Continue.
76
This is the Internet version of the user's guide. © Print only for private use.
Troubleshooting
3. Re-enter the new passcode to confirm.
4. Enter a checkword (maximum 15 characters) } Done.
The checkword can consist of both letters and numbers.
Troubleshooting
This chapter offers solutions to problems that you might encounter
while using your phone. Some problems require that you call
your service provider, but most of the problems you can easily
correct yourself.
To add a new code
1. } Organiser & Tools } Code memo and enter your
passcode } New code } Add.
2. Enter a name associated with the code, } Continue.
3. Enter the code } Done.
However, if you need to hand in your phone for repair, please
note that you may lose information and content that you have
saved in your phone. You are advised to make a copy of such
information before handing your phone in for repair.
To change the passcode
1. } Organiser & Tools } Code memo and enter your
passcode } More } Change passcode.
2. Enter your new passcode } Continue.
3. Re-enter the new passcode } Continue.
4. Enter a checkword } Done.
Master reset
The changes that you have made to settings and the content
that you have added or edited, will be deleted.
Forgot your passcode?
If you forget your passcode, you must reset the code memo.
• If you select } Reset settings, the changes that you have
made to settings will be deleted.
• If you select } Reset all, in addition to your changes to
settings, all contacts, messages, personal data, and content
that you have downloaded, received or edited will also be
deleted.
To reset code memo
1. Enter any passcode to access the code memo function. The
checkword and codes that are then shown are incorrect.
2. } Organiser & Tools } Code memo } More } Reset.
3. Reset code memo? is displayed } Yes. The code memo is
reset and all entries are cleared. The next time you enter the
code memo, you must start by opening the code memo for
the first time.
This is the Internet version of the user's guide. © Print only for private use.
77
Troubleshooting
To reset the phone
Insert correct SIM card
1. } Settings } the General tab } Master reset.
2. } Reset settings or } Reset all.
3. } Yes to continue.
4. Enter the phone lock code (0000 or the new code if you
have changed it) } OK.
Possible cause: The phone is set to work only with certain
SIM cards.
Solution: Check if you are using the correct operator SIM card
for your phone.
Wrong PIN/Wrong PIN2
Note: If you select Reset all, content such as melodies and
pictures that you have downloaded, received or edited is also
deleted.
Possible cause: You have entered your PIN or PIN2 incorrectly.
Solution: Enter the correct PIN or PIN2 } Yes. %71 SIM card lock.
PIN blocked/PIN2 blocked
Error messages
Possible cause: You have entered your PIN or PIN2 code
incorrectly three times in a row.
Insert SIM
Possible cause: There is no SIM card in the phone or you may
have inserted it incorrectly.
Solution: To unblock, %71 SIM card lock.
Solution: Insert a SIM card. %10 To insert SIM card and battery. Codes do not match
Possible cause: The two codes that you have entered do not
match.
Possible cause: The SIM card connectors need cleaning.
Solution: Remove the SIM card and clean it. Also check that the
card is not damaged in a way that may prevent connection to
the phone connectors. In that case, contact your network operator
for a new SIM card.
Solution: When you want to change a security code (for example
your PIN) you have to confirm the new code by entering exactly
the same code again. %71 SIM card lock.
78
This is the Internet version of the user's guide. © Print only for private use.
Troubleshooting
No netw. coverage
Phone locked
Possible cause: Your phone is not receiving any radio signal,
Possible cause: The phone is locked.
or the received signal is too weak.
Solution: To unlock the phone, %72 Phone lock.
Solution: Contact your network operator and make sure that the
network has coverage where you are. If so, try to do a new search.
Phone lock code:
Possible cause: The SIM card is not working properly.
Solution: Enter the phone lock code. Your phone comes with
the default phone lock code 0000. You can change it to any
four- to eight-digit code. %72 Phone lock.
Solution: Insert your SIM card in another phone. If you still get
the same or a similar message, please contact your network
operator.
PUK blocked
Possible cause: The phone is not working properly.
Possible cause: You entered your personal unblocking key code
Solution: Insert your SIM card in another phone. If this works,
it is probably the phone that is causing the problem. Please
contact the nearest Sony Ericsson service location.
(PUK) incorrectly 10 times in a row.
Solution: Contact your network operator.
Charging, alien battery
Emerg. calls only
Possible cause: The battery that you are using is not a battery
approved by Sony Ericsson.
Possible cause: You are within range of a network, but you are
not allowed to use it. However, in an emergency, some network
operators allow you to call the international emergency number
112.
Solution: %88 Battery use and care.
Solution: You have to move to get a signal that is strong enough.
Contact your network operator and make sure your subscription
is ok. %17 Emergency calls.
This is the Internet version of the user's guide. © Print only for private use.
79
Troubleshooting
Possible cause: Since you cannot send themes, pictures and
sounds that are copyright-protected, the Send menu is
sometimes unavailable.
Troubleshooting
I have problems with memory capacity or the phone
working slowly
Possible cause: The phone memory is full or the memory
contents are not properly organized.
Possible cause: The wrong language is set in the phone.
Solution: Change the language, %14 Phone language.
Solution: Restart your phone every day to free memory and
increase the capacity of your phone.
I cannot turn on the phone
You also have the option to do a Master reset. Some of your
personal data and settings you have made will be lost when
doing this. %78 Master reset.
Possible cause: The battery is discharged.
Solution: Recharge the battery, %11 To charge the battery.
Solution: Make sure you attached the charger correctly. Turn
the phone on with the charger attached. If the phone starts,
restart the phone with no charger attached.
No battery icon appears when I start charging the phone
Possible cause: The battery is empty or has not been used for
a long time.
I cannot charge the phone or battery capacity is low
Solution: It may take up to 30 minutes before the battery icon
appears on the screen.
Possible cause: The charger is not properly connected to the
phone.
Some menu options appear in grey
into place when connected. The battery icon flashes when
charging is in progress, and stops when the battery is fully
charged, %11 To charge the battery.
Possible cause: Grey text indicates a function that is
temporarily unavailable. A service is not activated or your
subscription does not support the function.
Solution: Contact your network operator.
Possible cause: The battery connection is bad.
80
This is the Internet version of the user's guide. © Print only for private use.
Troubleshooting
Solution: Remove the battery and clean the connectors. You can
use a soft brush, cloth or q-tip, soaked with alcohol. Make sure
that the battery is completely dry before you put it back. Check
that the battery connectors in the phone are undamaged.
I cannot use MMS/picture messages on my phone
Possible cause: Your subscription does not include data
capability.
Solution: Please contact your network operator.
Possible cause: The battery is worn out and needs to be replaced.
Possible cause: Settings are missing or incorrect.
Solution: Try another battery and charger for the same phone
model, or visit your retailer and ask them to verify if the battery
and charger are working properly.
Solution: Go to your network operator’s Web site, choose your
phone model, then choose “Phone setup – MMS” and follow
the instructions. %68 Settings.
The phone turns itself off
I cannot use the Internet/WAP
Possible cause: The
button has been pushed unintentionally.
Possible cause: Your subscription does not include data
capability.
Solution: Turn on the automatic key lock, or lock the keypad
manually, %72 Keypad lock.
Solution: Please contact your network operator.
Possible cause: The battery connection is bad.
Possible cause: Internet settings are missing or incorrect.
Solution: Make sure the battery is inserted correctly,
%10 To insert SIM card and battery.
Solution: Go to your network operator’s Web site, choose your
phone model, then choose “Phone setup – WAP” and follow
the instructions. %68 Settings.
I cannot use SMS/text messages on my phone
Possible cause: Settings are missing or incorrect.
The phone cannot be detected by other users via
Bluetooth
Solution: Contact your network operator to find out the correct
SMS service centre setting, %35 Text messaging (SMS).
Possible cause: You have not turned Bluetooth on.
This is the Internet version of the user's guide. © Print only for private use.
81
Icons shown in standby
Solution: Make sure that Bluetooth is turned on and that your
phone is visible to other users. %64 To hide or show your
phone when using Bluetooth.
Icons shown in standby
The table below lists and explains icons which appear in
standby mode.
I have problems synchronizing or transferring data
between my phone and my computer, when using
the USB cable that came with the phone
Icon
Description
Possible cause: The cable has not been properly detected and
installed on your computer.
Press
to go to the main menu
The software that came with your phone has not been properly
installed on the computer.
The 3G (UMTS) network is available
Tells you the strength of the GSM network signal
You are within your home zone
You are in a premium charge zone
Tells you the status of the battery
Tells you that the battery is charging
Solution: Go to your network operator’s Web site, choose your
phone model, then choose “Product information” - “Getting
started”. The guide “Synchronizing the phone with a computer”
contains installation instructions and a troubleshooting guide,
that may assist you in solving the problem.
All phone transmitters are off. You can use the
media player only
82
This is the Internet version of the user's guide. © Print only for private use.
Icons shown in standby
Icon
Description
Icon
Description
You cannot receive any incoming calls
The magic word is activated
Speakerphone is activated
You have missed an incoming call
The card or phone lock is on. A secure Internet
connection is established
All incoming calls are diverted to a defined
number
You have received a text message
All signals are off, except the alarm and timer
The alarm clock has been set and is on
The timer has been set and is on
You have received an email message
You have received a picture message
You have received a voice message
You have received an instant message
You have received a message via cell broadcast
You have received a WAP push message
The stopwatch is working in the background
You have set a reminder for an appointment
You have set a reminder for a task
A profile other than Normal has been selected
This is the Internet version of the user's guide. © Print only for private use.
83
Icons shown in standby
Icon
Description
Icon
Description
Your phone is receiving a picture message
Line 2 is in use for outgoing calls
Your phone is sending a picture message
Ciphering is currently not being provided by the
network
One or more messages are waiting to be
downloaded from the server
An ongoing call
One or more picture messages are waiting to be
downloaded from the server
The media player is running
A Java application is running
Your movie can be sent using MMS
The infrared port is on
Infrared communication is in progress
Bluetooth port is turned on
Your movie is too large and cannot be sent
using MMS
Bluetooth headset is connected to your phone
Data is being downloaded to the phone
Line 1 is in use for outgoing calls
84
This is the Internet version of the user's guide. © Print only for private use.
Health & Safety
• Do not use your product when in, or around aircraft,
or areas posted “turn off two-way radio”.
• Do not use your product in an area where a potentially
explosive atmosphere exists.
Health & Safety
Please read this section carefully. It contains health and safety
information that when followed allows for safe and efficient use
of the phone.
• Do not place your product or install wireless equipment
in the area above your car’s air bag.
• Do not attempt to disassemble your product.
Only Sony Ericsson authorised personnel
should perform service.
Antenna
Only use an antenna that has been specifically designed by
Sony Ericsson for your mobile phone. Use of unauthorised or
modified antennas could damage your mobile phone and may
violate regulations, causing loss of performance and SAR levels
above the recommended limits (see below).
Guidelines for Safe and Efficient Use
Please read this information before using your
mobile phone.
Recommendations
• Always treat your product with care and keep
it in a clean and dust-free place.
• Do not expose your product to liquid
or moisture or humidity.
• Do not expose your product to extreme high
or low temperatures.
Efficient use
Hold your mobile phone as you would any other phone. Do not
cover the top of the phone when in use, as this affects call quality
and may cause the phone to operate at a higher power level
than needed, thus shortening talk and standby times.
Radio frequency (RF) exposure and SAR
• Do not expose your product to open flames
or lit tobacco products.
Your mobile phone is a low-power radio transmitter and
receiver. When it is turned on, it emits low levels of radio
frequency energy (also known as radio waves or radio
frequency fields).
• Do not drop, throw or try to bend your product.
• Do not paint your product.
• Do not use your product near medical
equipment without requesting permission.
This is the Internet version of the user's guide. © Print only for private use.
85
Health & Safety
Governments around the world have adopted comprehensive
international safety guidelines, developed by scientific
organizations, e.g. ICNIRP (International Commission on Non-
Ionizing Radiation Protection) and IEEE (The Institute of
Electrical and Electronics Engineers Inc.), through periodic and
thorough evaluation of scientific studies. These guidelines
establish permitted levels of radio wave exposure for the general
population. The levels include a safety margin designed to
assure the safety of all persons, regardless of age and health,
and to account for any variations in measurements.
Driving
Please check if local laws and regulations restrict the use of
mobile phones while driving or require drivers to use handsfree
solutions. We recommend that you use only Sony Ericsson
handsfree solutions intended for use with your product. Please
note that because of possible interference to electronic equipment,
some vehicle manufacturers forbid the use of mobile phones in
their vehicles unless a handsfree kit with an external antenna
supports the installation.
Always give full attention to driving and pull off the road and
park before making or answering a call if driving conditions
so require.
Specific Absorption Rate (SAR) is the unit of measurement for
the amount of radio frequency energy absorbed by the body
when using a mobile phone. The SAR value is determined at
the highest certified power level in laboratory conditions, but
the actual SAR level of the mobile phone while operating can be
well below this value. This is because the mobile phone is
designed to use the minimum power required to reach the
network.
Personal medical devices
Mobile phones may affect the operation of cardiac pacemakers
and other implanted equipment. Please avoid placing the mobile
phone over the pacemaker, e.g. in your breast pocket. When
using the mobile phone, place it at the ear opposite the
pacemaker. If a minimum distance of 15 cm (6 inches) is kept
between the mobile phone and the pacemaker, the risk of
interference is limited. If you have any reason to suspect that
interference is taking place, immediately turn off your mobile
phone. Contact your cardiologist for more information.
Variations in SAR below the radio frequency exposure guidelines
do not mean that there are variations in safety. While there may
be differences in SAR levels among mobile phones, all Sony
Ericsson mobile phone models are designed to meet radio
frequency exposure guidelines.
A separate leaflet with SAR information for this mobile phone
model is included with the material that comes with this mobile
phone. This information can also be found, together with more
information on radio frequency exposure and SAR, on:
For other medical devices, please consult the manufacturer
of the device.
86
This is the Internet version of the user's guide. © Print only for private use.
Health & Safety
To reduce risk of electric shock, unplug the unit from any power
source before attempting to clean it. The AC power adapter
must not be used outdoors or in damp areas. Never alter the
cord or plug. If the plug will not fit into the outlet, have a proper
outlet installed by a qualified electrician.
CHILDREN
DO NOT ALLOW CHILDREN TO PLAY WITH YOUR
MOBILE PHONE OR ITS ACCESSORIES. THEY
COULD HURT THEMSELVES OR OTHERS, OR
COULD ACCIDENTALLY DAMAGE THE MOBILE PHONE OR
ACCESSORY. YOUR MOBILE PHONE OR ITS ACCESSORY MAY
CONTAIN SMALL PARTS THAT COULD BE DETACHED AND
CREATE A CHOKING HAZARD.
Emergency calls
Mobile phones operate using radio signals, which cannot
guarantee connection under all conditions. Therefore you
should never rely solely upon any mobile phone for essential
communications (e.g. medical emergencies).
Disposal of old electrical &
electronic equipment
This symbol on the product or on its packaging
indicates that this product shall not be treated as
Emergency calls may not be possible on all cellular networks
or when certain network services and/or mobile phone features
are in use. Check with your local service provider.
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Battery use and care
We recommend that you fully charge the battery before you use
your mobile phone for the first time. The battery can only be
charged in temperatures between +5°C (+41°F) and +45°C
(+113°F).
A new battery or one that has not been used for a long time
could have reduced capacity the first few times it is used.
The talk and standby times depend on the actual transmission
conditions when using the mobile phone. If the mobile phone is
used near a base station, less power is required and talk and
standby times are prolonged.
Power supply
Connect the AC power adapter only to designated power
sources as marked on the product. Make sure the cord is
positioned so that it will not be subjected to damage or stress.
This is the Internet version of the user's guide. © Print only for private use.
87
Health & Safety
• Warning! May explode if disposed of in fire.
• Use only Sony Ericsson branded original batteries and
chargers intended for use with your mobile phone. Other
chargers may not charge sufficiently or may produce
excessive heat. Using other batteries and chargers could
be dangerous.
Limited Warranty
Sony Ericsson Mobile Communications AB, S-221 88 Lund,
Sweden, (Sony Ericsson), provides this Limited Warranty for
your mobile phone and original accessory delivered with your
mobile phone (hereinafter referred to as “Product”).
• Do not expose the battery to liquid.
• Do not let the metal contacts on the battery touch another
metal object. This could short-circuit and damage the
battery.
• Do not disassemble or modify the battery.
• Do not expose the battery to extreme
temperatures, never above +60°C (+140°F).
For maximum battery capacity, use the battery
in room temperature.
• Turn off your mobile phone before removing the
battery.
• Keep out of children’s reach.
• Use the battery for the intended purpose only.
• Do not allow the battery to be put into the
mouth. Battery electrolytes may be toxic if
swallowed.
Should your Product need warranty service, please return it to
the dealer from whom it was purchased, or contact your local
Sony Ericsson Call Center (national rates may apply) or visit
OUR WARRANTY
Subject to the conditions of this Limited Warranty, Sony Ericsson
warrants this Product to be free from defects in design, material
and workmanship at the time of its original purchase by a
consumer, and for a subsequent period of one (1) year.
WHAT WE WILL DO
If, during the warranty period, this Product fails to operate under
normal use and service, due to defects in design, materials or
workmanship, Sony Ericsson authorised distributors or service
partners, in the country/region* where you purchased the
Product, will, at their option, either repair or replace the Product
in accordance with the terms and conditions stipulated herein.
Disposing of the battery
Please check local regulations for disposal of
batteries or call your local Sony Ericsson Call
Center for information.
Sony Ericsson and its service partners reserve the right to charge
a handling fee if a returned Product is found not to be under
warranty according to the conditions below.
The battery should never be placed in municipal waste.
Use a battery disposal facility if available.
88
This is the Internet version of the user's guide. © Print only for private use.
Health & Safety
Please note that some of your personal settings, downloads or
other information may be lost when your Sony Ericsson Product
is repaired or replaced. At present Sony Ericsson may be
prevented by applicable law, other regulation or technical
restrictions from making a backup copy of certain downloads.
Sony Ericsson does not take any responsibility for any lost
information of any kind and will not reimburse you for any such
loss. You should always make backup copies of all the
information stored on your Sony Ericsson Product such as
downloads, calendar and contacts before handing in your Sony
Ericsson Product for repair or replacement.
3. This warranty does not cover any failure of the Product due
to normal wear and tear, or due to misuse, including but not
limited to use in other than the normal and customary manner,
in accordance with the Sony Ericsson instructions for use
and maintenance of the Product. Nor does this warranty
cover any failure of the Product due to accident, software
or hardware modification or adjustment, acts of God or
damage resulting from liquid.
A rechargeable battery can be charged and discharged
hundreds of times. However, it will eventually wear out –
this is not a defect. When the talk-time or standby time
is noticeably shorter, it is time to replace your battery.
Sony Ericsson recommends that you use only batteries
and chargers approved by Sony Ericsson.
Minor variations in display brightness and color may occur
between phones. There may be tiny bright or dark dots on
the display. These are called defective pixels and occur when
individual dots have malfunctioned and can not be adjusted.
Two defective pixels are deemed acceptable.
Minor variations in camera image appearance may occur
between phones. This is nothing uncommon and is not
regarded as a defective camera module.
CONDITIONS
1. The warranty is valid only if the original proof of purchase
issued to the original purchaser by an, for this Product, Sony
Ericsson authorised dealer, specifying the date of purchase
and serial number**, is presented with the Product to be
repaired or replaced. Sony Ericsson reserves the right to
refuse warranty service if this information has been removed
or changed after the original purchase of the Product from
the dealer.
2. If Sony Ericsson repairs or replaces the Product, the repaired
or replaced Product shall be warranted for the remaining
time of the original warranty period or for ninety (90) days
from the date of repair, whichever is longer. Repair or
replacement may involve the use of functionally equivalent
reconditioned units. Replaced parts or components will
become the property of Sony Ericsson.
4. Since the cellular system on which the Product is to operate
is provided by a carrier independent from Sony Ericsson,
Sony Ericsson will not be responsible for the operation,
availability, coverage, services or range of that system.
This is the Internet version of the user's guide. © Print only for private use.
89
Health & Safety
5. This warranty does not cover Product failures caused by
installations, modifications, or repair or opening of the
Product performed by a non-Sony Ericsson authorised
person.
6. The warranty does not cover Product failures which have
been caused by use of accessories or other peripheral
devices which are not Sony Ericsson branded original
accessories intended for use with the Product.
7. Tampering with any of the seals on the Product will void
the warranty.
8. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN
OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY.
ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT
SHALL SONY ERICSSON OR ITS LICENSORS BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE
WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST
PROFITS OR COMMERCIAL LOSS; TO THE FULL EXTENT
THOSE DAMAGES CAN BE DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion or limitation
of incidental or consequential damages, or limitation of the
duration of implied warranties, so the preceding limitations
or exclusions may not apply to you.
*EUROPEAN UNION (EU)
If you have purchased your Product in an EU country you can
have your Product serviced, under the conditions set out above,
within the warranty period in any EU country where an identical
Product is sold by an authorised Sony Ericsson distributor. To
find out if your Product is sold in the EU country you are in,
please call the local Sony Ericsson Call Center. Please observe
that certain services may not be possible elsewhere than in the
country of original purchase, for example due to the fact that
your Product may have an interior or exterior which is different
from equivalent models sold in other EU countries. It may not
be possible to repair SIM-locked Products.
** In some countries/regions additional information is
requested. If so, this is clearly shown on the valid proof
of purchase.
FCC Statement
This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference
received, including interference that may cause undesired
operation.
The warranty provided does not affect the consumer's statutory
rights under applicable legislation in force, nor the consumer’s
rights against the dealer arising from their sales / purchase
contract.
90
This is the Internet version of the user's guide. © Print only for private use.
Health & Safety
Declaration of Conformity
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
S-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony Ericsson type AAD-3021011-BV
and in combination with our accessories, to which this
declaration relates is in conformity with the appropriate
standards 3GPP TS 51.010-1, 3GPP TS 34.121, EN 301489-7,
EN 301489-24, EN 300328, EN 301489-17 and EN 60950,
following the provisions of Radio Equipment and
Telecommunication Terminal Equipment directive 99/5/EC
with requirements covering EMC directive 89/336/EEC, and
Low Voltage directive 73/23/EEC.
0682
Lund, April 2005
Hiroshi Yoshioka, Head of Product Business Unit GSM/UMTS
We fulfil the requirements of the R&TTE Directive (99/5/EC).
This is the Internet version of the user's guide. © Print only for private use.
91
Index
A
inserting 10
use and care 88
display 76
business cards 32
buttons 8
calls
accept calls 32
activity menu 34
alarm clock 75
alerts 70
accepting 32
answering 16
diverting 29
emergency 17
animations 48
missed 16
putting on hold 30
rejecting 16
answering
calls 16
using voice control 28
answering service 26
appointments 73
area information 44
ask to save 24
assembling, phone 10
automatic redialling 16
calculator 77
call list 26
call time 34
call waiting 30
caller-specific ringtones 70
calling
restricting 33
from contacts 23
numbers in message 36
using voice dialling 27
B
camera 44–47
battery
charging 11
cell information 44
charging, battery 11
This is the Internet version of the user's guide. © Print only for private use.
93
code memo 77
codes
changing 14
in phone 14
PIN 11
PUK 11
language in phone 81
letters
conference calls 31
connectors 8
contacts 22
groups 32
SIM card 71
handsfree 65
hiding number 32
long messages 37
checking memory 23
default contacts 22
groups of 32
magic word 28
main menu 12
media player 59–61
melodies 70–71
synchronizing 61
international calls 17
D
date, setting 69
declaration of conformity 92
directing sound 65
display
brightness 76
diverting calls 29
key sound 71
keypad lock 72
keys 8
area information 44
email 41
E
email
picture 37, 40
L
text 35
using 41–42
language
voice 40
94
This is the Internet version of the user's guide. © Print only for private use.
Messenger 43
redialling 16
microphone, turning off/on 16
missed calls 16
passcodes
roaming 15
Bluetooth 64
code memo 77
phone lock 72
phone overview 8
PhotoDJ™ 48
edit 48
screen saver 48
wallpaper 48
entering 12
profiles 71
multitap text input
entering 20
music, playing 59
My items 21
from text messages 36
screen saver 48
code memo 77
SIM card lock 71
sending
N
navigating menus 12
networks, selecting 15
new events 34
night mode 46
notepad 31
notes 76
number
hiding 32
my own 31
notes 76
O
R
on if silent 70
Online 61
recording
video clips 45
pictures 49
voice commands 27–29
tasks 74, 75
This is the Internet version of the user's guide. © Print only for private use.
95
themes 69
setup wizard 12
shortcuts 14
SIM card
T
unblocking
PIN 11
USB cable 67
copying to/from 26
inserting 10
lock 71
unblocking 71, 72
video clips 59
video recorder 44–47
voicemail 26
SIM contacts 23
SIM numbers 24
sound
time, setting 69
directing 65
transferring 65
Bluetooth 63
key sound 71
phone 12
speaker volume 15
speed dialling 26
standby screen 12
start-up menu 77
start-up screen 48, 69
status bar 12
changing 15
vibrating alert 70
phone lock 73
two voice lines 33
stopwatch 76
W
streaming media 61
synchronizing 61–63
wallpaper 48
warranty 89
96
This is the Internet version of the user's guide. © Print only for private use.
wizard
writing
setup 12
using multitap input 20
using T9™ Text Input 20
Z
zoom 45
This is the Internet version of the user's guide. © Print only for private use.
97
|