SIIG 5052 User Manual

USB3.0Single ExpressCard/34  
Quick Installation Guide  
Introduction  
The USB 3.0 Single ExpressCard/34 adds a USB  
3.0porttoyourExpressCard-equippedcomputer,  
enhancing existing systems with the latest USB  
3.0 technology.  
Key Features and Benefits  
Compliant with Universal Serial Bus 3.0  
Specification, Revision 1.0  
Compliant with PCI Express Base  
Specification, Revision 2.0  
Supports data transfer rate up to 5Gb/s  
and backward compatible with previous  
versions of USB devices  
Serial Number Sticker  
For future product return or exchange, this serial  
number is required. Please keep it for your  
reference.  
04-0684A  
1
USB Power Cable Installation (optional)  
The USB Power Cable is only needed when the  
ExpressCard doesn't provide enough power to  
power up your USB device. Self powered USB  
devices do not need this optional power cable to  
work.  
1.  
2.  
3.  
4.  
5.  
6.  
Unplug the USB device from the  
ExpressCard.  
Remove the USB 3.0 Single ExpressCard/34  
adapter from the ExpressCard slot.  
Connect the USB Power Cable to the  
ExpressCard.  
Plug the other end of the cable into any USB  
port of the computer.  
Insert the USB 3.0 Single ExpressCard/34  
into the ExpressCard slot of your computer.  
Plug in your USB device into the  
ExpressCard.  
3
Installation  
Please make sure the ExpressCard is installed  
before proceeding with driver installation.  
Windows 7 (32-/64-bit) / Vista (32-/64-bit)  
1.  
At the Windows desktop.  
For Windows 7: Go directly to step 2.  
For Windows Vista: At the Found New  
Hardware window, click Cancel.  
Insert the driver CD.  
2.  
For Windows 7: At the AutoPlay box, click  
Open folder to view files, then double  
click Setup.  
For Windows Vista: At the CD Autoplay  
window, double click Setup.  
At User Account Control.  
3.  
For Windows 7: Click Yes.  
For Windows Vista: Click Continue.  
At Welcome, click Next.  
Select I accept the terms of the license  
agreement, click Next.  
4.  
5.  
6.  
At Ready to Install the Program, click  
Install.  
4
7.  
8.  
Wait while the InstallShield Wizard  
configures your system. Depending on  
your system hardware this process may  
take several minutes to complete.  
At InstallShield Wizard Complete, click  
Finish.  
Windows XP (32-/64-bit)  
1.  
At the Found New Hardware Wizard, click  
Cancel.  
2.  
Insert the driver CD. Click Start, Run. Type  
D:\Setup.exe, click OK. (Change D: to  
match your CD\DVD-ROM drive letter)  
At Welcome, click Next.  
Select I accept the terms of the license  
agreement, click Next.  
3.  
4.  
5.  
6.  
At Ready to Install the Program, click  
Install.  
Wait while the InstallShield Wizard  
configures your system. Depending on  
your system hardware this process may  
take several minutes to complete.  
At InstallShield Wizard Complete, click  
Finish.  
7.  
5
To Verify Successful Installation  
1.  
Go to Device Manager to verify installation.  
For Windows 7: Right click Computer,  
click Manage, click Device Manager.  
For Windows Vista: Right click Computer,  
click Manage, click Continue, then click  
Device Manager.  
ForWindowsXP: RightclickMyComputer,  
click Manage, click Device Manager.  
Double click Universal Serial Bus  
controllers. A Renesas Electronics USB  
3.0 Host Controller and a Renesas  
Electronics USB 3.0 Root Hub should be  
displayed.  
2.  
6
TechnicalSupportandWarranty  
QUESTIONS? SIIGs Online Support has answers! Simply visit our web site at  
www.siig.com and click Support. Our online support database is updated daily with  
new drivers and solutions. Answers to your questions could be just a few clicks away.  
You can also submit questions online and a technical support analysts will promptly  
respond.  
SIIG offers a lifetime manufacturer warranty with this product. This warranty covers  
the original purchaser and guarantees the product to be free of any defects in materials  
or workmanship for the life of the product.  
SIIG will, at our discretion, repair or replace (with an identical product or product  
having similar features and functionality) the product if defective in materials or  
workmanship. This warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state. Please see our web site for more warranty details.  
If you encounter any problems with this product, please follow the procedures below.  
A) If it is within the store's return policy period, please return the product to the store  
where you purchased from.  
B) If your purchase has passed the store's return policy period, please follow the steps  
below to have the product repaired or replaced.  
Step 1: Submit your RMA request.  
Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA or  
fax a request to 510-657-5962. Your RMA request will be processed, if the product  
is determined to be defective, an RMA number will be issued.  
Step 2: After obtaining an RMA number, ship the product.  
Properly pack the product for shipping. All accessories that came with the  
original package must be included.  
Clearly write your RMA number on the top of the returned package. SIIG will  
refuse to accept any shipping package, and will not be responsible for a product  
returned without an RMA number posted on the outside of the shipping  
carton.  
You are responsible for the cost of shipping to SIIG. Ship the product to the  
followingaddress:  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
RMA #:  
SIIG will ship the repaired or replaced product via Ground in the U.S. and  
International Economy outside of the U.S. at no cost to the customer.  
7
About SIIG, Inc.  
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity  
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,  
and legacy I/O adapters) that bridge the connection between Desktop/  
Notebooksystemsandexternalperipherals. SIIGcontinuestogrowbyadding  
A/V and Digital Signage connectivity solutions to our extensive portfolio.  
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,  
andarebackedbyanextensivemanufacturerwarranty. Highqualitycontrol  
standards are evident by the overall ease of installation and compatibility of  
ourproducts,aswellasoneofthelowestdefectivereturnratesintheindustry.  
SIIG products can be found in computer retail stores, mail order catalogs,  
throughmajordistributors,systemintegrators,andVARsintheAmericasand  
theUK,andthroughe-commercesites.  
PRODUCT NAME  
USB 3.0 Single ExpressCard/34  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B  
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCCCOMPLIANCESTATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
Phone: 510-657-8688  
USB 3.0 Single ExpressCard/34 is a trademark of SIIG, Inc. SIIG and the SIIG logo are  
registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of  
MicrosoftCorporation. Allothernamesusedinthispublicationareforidentificationonlyand  
may be trademarks of their respective owners.  
February, 2011  
Copyright © 2011 by SIIG, Inc. All rights reserved  

TRENDnet Computer Accessories TV IP312 User Manual
TRENDnet Computer Accessories TV IP212W User Manual
Toastmaster TCM12DW User Manual
Sony D 170AN User Manual
Pioneer DEH P65BT User Manual
Pioneer CD Player DEH 3850MPH User Manual
Philips CT0292BLK User Manual
Onkyo DX 7222 User Manual
Nokia Asha 311 User Manual
Nokia 8270 User Manual