Kambrook Cable Box keb442 User Manual

®
Snugasabug  
Fitted Electric  
Blanket  
Instruction Booklet  
Suits models KEB412/KEB432,  
KEB442/KEB512/KEB532/KEB542  
KEB412_IB_FA.indd  
1
14/10/09 1:26 PM  
Contents  
Kambrook Recommends  
Safety First  
Your Snugasabug® Fitted  
Electric Blanket  
Using your Snugasabug®  
Fitted Electric Blanket  
p4  
p6  
p7  
Care and Cleaning  
Warranty Details  
p10  
p12  
KEB412_IB_FA.indd  
3
14/10/09 1:26 PM  
Kambrook Recommends Safety First  
IMPORTANT: Please retain your  
instruction book for future use.  
Electric Blanket: Type WB3F, WB4F and WB5F  
At Kambrook, we believe that safe performance is the first priority in any  
consumer product, so that you, our valued customer can confidently  
use and trust our products. We ask that any electrical appliance that  
you use be operated in a sensible fashion with due care and attention  
placed on the following important operating instructions.  
Important Safeguards For Your Kambrook  
Snugasabug® Fitted Electric Blanket  
Carefully read all instructions before  
operating the Kambrook Snugasabug  
Fitted Electric Blanket and save for future  
reference.  
Remove any packaging material and  
promotional stickers before using the  
Kambrook Electric Blanket for the first  
time.  
Overly extended application at a high  
setting can result in skin irritation or burns.  
Avoid sharp objects. Do not insert pins  
or any sharp objects into the electric  
blanket as they may damage the  
electrical wiring.  
Do not use pins – they may damage the  
electric wiring.  
Use the Electric Blanket only with the  
detachable controller KB31 provided.  
Refer to the markings on the heating unit  
for the model number of the controller.  
Connect only to a 230V or 240V power  
outlet.  
Do not use folded, rucked or rolled.  
Do not tuck in.  
Do not use creased, folded or damaged  
in any way.  
Keep control unit away from an open  
window.  
Use this blanket as an under blanket only.  
Be sure that this blanket is used only on  
an alternating current supply circuit of  
correct voltage.  
The flexible power supply cord and  
controller must, as far as practicable, be  
kept outside the bed.  
Be sure that the electric blanket is  
installed so that at all times the flexible  
supply plug is adjacent and accessible  
to the main power outlet.  
Not recommended for futons or similar  
folding bedding systems.  
This blanket is not recommended to  
be used on an adjustable bed. If used  
on an adjustable bed, check that the  
blanket or cord cannot become caught,  
creased, kinked or damaged in any way.  
Make sure that the heating area (wire  
element) on any side of the bed does  
not hang over the edge of the mattress  
and that the following instructions are  
read carefully before using the blanket.  
Do not use the electric blanket if it is wet  
Switch off at the power outlet and  
remove plug when this blanket is not in  
actual use.  
This blanket must be kept in the fully  
spread condition at all times during use  
to avoid overheating. It is imperative  
Do not use this blanket with an infant,  
an infirm person or anyone insensitive to  
heat.  
Use only for human use, not for pets.  
4
KEB412_IB_FA.indd  
4
14/10/09 1:26 PM  
that the blanket be frequently inspected  
to ensure that this condition is being  
maintained.  
a specially designed controller and no  
attempt should be made to repair it or  
to replace the protective fuse. Have  
the electric blanket serviced only by a  
qualified service agent at your nearest  
Kambrook Service Centre.  
Regularly inspects the electric blanket,  
power supply cord, plug and controller  
for any wear, damage or misuse. If signs  
of these are detected, immediately  
cease use of the appliance and return  
the entire unit to your nearest Kambrook  
Service Centre for examination,  
When storing the electric blanket, allow it  
to cool down before folding  
When storing, fold neatly but not tightly  
(or roll) in the original packaging without  
sharp bends in the heating element  
and store where no other objects will be  
placed upon it.  
Do not dry clean this blanket. Cleaning  
liquids may have a deleterious effect  
on the insulation covering of the  
heating unit. It is recommended to  
follow instructions for localized soiling or  
washing if soiling occurs. Please refer to  
Care and Maintenance instructions.  
This appliance is for domestic use only.  
Not intended for medical use in hospitals.  
Avoid pressing creases into the  
appliance.  
It is recommended that a qualified and  
registered person inspect the electric  
blanket after each 3 years of use.  
replacement or repair.  
Bed clothes should not be folded back  
when the blanket is switched on. Do not  
leave heavy objects on the bed when  
the unit is switched on.  
Arrange the blanket so that the heating  
wires are not beneath pillows and/or  
bolsters.  
Person suffering from bed-wetting should  
only use product specifically designed  
for this condition.  
The blanket must not be used over or  
under a waterbed.  
If any abnormality or defect in operation  
of this blanket is observed, discontinue  
its use immediately and consult the  
manufacture or a licensed electrician.  
There are no customer serviceable parts  
inside.The electric blanket is fitted with  
Important Safeguards For All Electrical  
Appliances  
Fully unwind the power cord before use.  
Contact customer Service on 1300 139  
798  
Do not let the power cord hang over  
the edge of a bench or table,touch hot  
surfaces or become knotted.  
Any maintenance other than cleaning  
should be performed at an authorised  
Kambrook Service Centre.  
This appliance is for household use only.  
Do not use this appliance for anything  
other than its intended use.Do not use  
in moving vehicles or boats.Do not use  
outdoors.Misuse may cause injury.  
The installation of a residual current  
device (safety switch) is recommended  
to provide additional safety protection  
when using electrical appliances.It is  
advisable that a safety switch with a  
rated residual operating current not  
exceeding 30mA be installed in the  
electrical circuit supplying the appliance.  
See your electrician for professional  
advice.  
The appliance is not intended for use by  
persons (including children) with reduced  
physical,sensory or mental capabilities,  
or lack of experience and knowledge,  
unless they have been given supervision  
or instruction concerning use of the  
appliance by a person responsible for  
their safety.  
Children should be supervised to ensure  
that they do not play with the appliance.  
It is recommended to regularly inspect  
the appliance.To avoid a hazard do not  
use the appliance if power cord,power  
plug or appliance becomes damaged in  
any way.Return the entire appliance to  
the nearest authorised Kambrook Service  
Centre for examination and/or repair,or  
5
KEB412_IB_FA.indd  
5
14/10/09 1:26 PM  
Your Snugasabug® Fitted Electric Blanket  
KEB412  
KEB432  
KEB442  
KEB512  
KEB532  
KEB542  
Large Single  
Double / Queen approximately 1460x1880mm  
King  
Large Single  
Double / Queen approximately 1460x1880mm  
King approximately 1780x2000mm  
approximately 900x1880mm  
no cover  
no cover  
no cover  
fleece cover  
fleece cover  
fleece cover  
approximately 1780x2000mm  
approximately 900x1880mm  
1. Fully fitted design with skirt (40cm  
skirt for KEB412 and KEB512. 45cm  
skirt for KEB432 and KEB532).  
Controller  
5. 3 Heat Settings for your comfort  
choice.  
2. Machine washable and tumble  
6. Detachable controller is easily  
removed from the electric  
dry electric blanket.  
3. Removable fleecy cover for easy  
cleaning (Only KEB512, KEB532  
and KEB542).  
blanket, so your electric blanket  
can be washed. Consists of the  
controller, cord and plug.  
4. Extra foot warmth for extra heat  
7. Dual controllers offered with the  
Double / Queen (KEB432 and  
532 model) and King (KEB442  
and KEB542 model) size for  
individual comfort.  
around your feet.  
8. Safety overheat protection.  
KEB412_IB_FA.indd  
6
14/10/09 1:26 PM  
Using Your Snugasabug® Fitted  
Electric Blanket  
Pull the elastic inside the fitted skirt  
Before First Use  
over the ends of the mattress. Ensure  
to pull the middle of the blanket so  
that the blanket is evenly stretched  
and distributed over the entire  
Remove any promotional material  
from the electric blanket.  
Securing Your Fitted Electric  
Blanket  
Place the electric blanket on the  
mattress, so that the skirt is visible and  
the controller is under the electric  
blanket and exits through the skirt  
aperture. Ensure the heating wire  
section on the electric blanket is clear  
of the pillow.  
mattress to ensure creases or rucking  
is not evident. No heating wire must  
be trapped or tucked into any part  
of the bed. Ensure the elastic of the  
blanket skirt is completely under the  
entire mattress and secure.  
NOTE: Ensure that the blanket  
is stretched completely flat  
when placed on the mattress  
and creases or rucking is not  
evident.  
CAUTION: No heating  
wire must be trapped or  
tucked into any part of  
the bed.  
Fig. 1  
NOTE: On the models KEB412  
and KEB512, the blanket can  
be turned over so that the  
controller is located on either  
side of the bed.  
Fig. 2  
NOTE: The blanket material  
must not be wider than the  
mattress with which it is to be  
used. It is normal for a small  
section of the fitted skirt to be  
showing on top of a larger  
sized mattress.  
7
KEB412_IB_FA.indd  
7
14/10/09 1:26 PM  
Using Your Snugasabug® Fitted  
Electric Blanket  
continued  
Ensure to pass the controller and  
wiring through the apertures in the  
skirt section of the blanket.  
To Detach The Controller  
The socket has a locking clip that  
engages with a small pin on the plug.  
Ensure that when the blanket is fitted  
onto the mattress the controller/s and  
flexible power supply are outside of  
the bed and coverings and located in  
a position that will prevent accidental  
damage to the housing and cords.  
Use this blanket only as an under  
blanket and do not use above the  
occupant of the bed.  
Ensure the electric blanket controller  
is in the ‘OFF’ position and not  
connected to the 230V or 240V power  
supply.  
With the controller set to the ‘OFF’  
position, push the clip out to release  
the socket pin and withdraw the  
connector plug by pulling it away  
from the socket.  
Fixing The Removable Cover  
(Only KEB512, KEB532 and  
KEB542 models)  
When fixing the removable cover in  
position ensure the fleecy side of the  
cover is on the uppermost side. Secure  
the removable cover using the studs  
fastened over the complete cover.  
Storing Your Control Unit  
Remove the controller when  
laundering your blanket. Store your  
controller during summer months  
while your blanket remains on the bed  
as a comfortable underblanket.  
Dual Control Units  
Your Double/Queen and King size  
electric blanket features two controls  
for individual comfort.  
There should be no rucking of the  
removable cover when the studs are  
completely fastened.  
No other cover other than that  
supplied with the blanket should be  
used with the electric blanket.  
Turning Your Fitted Electric  
Blanket On  
Ensure the electric blanket controller  
is positioned in the ‘OFF’ position  
indicated by an ‘0’.  
To Connect The Controller  
Your blanket has a detachable  
controller and waterproof element  
which makes your blanket machine  
washable.  
Plug the cord in a 230V or 240V power  
outlet and switch the power on.  
Ensure the electric blanket controller  
is in the ‘OFF’ position and not  
connected to the 230V or 240V power  
supply.  
To connect your controller, thread the  
detachable plug from the controller  
through the slot in the mesh skirt and  
plug it fully into the socket.  
Ensure that the locking clip engages  
with the small plastic pin on the plug.  
Turn the electric blanket over, position  
and fit it to the mattress.  
8
KEB412_IB_FA.indd  
8
14/10/09 1:26 PM  
Setting the Heat Temperature  
NOTE: We recommend that  
on initial use electric blanket  
controller is set on heat  
temperature ‘1’ for 3 hours to  
dry out any moisture which  
may have been accumulated  
in the mattress. Repeat this  
process every few months to  
maintain a dry, healthy bed.  
Adjust the heat temperature by  
sliding the switch to select the desired  
temperature setting between 1 and 3.  
The three settings allow you to choose  
the right balance of heat depending  
on your personal requirements.The  
numbers on the electric blanket  
controller correspond to the following  
temperatures:  
0 = No heat  
1 = Low heat (for low, gentle heat or  
all night use)  
2 = Medium heat  
3 = High heat (recommended for  
preheating only)  
You may notice an odour when using  
the electric blanket for the first time,  
due to the insulation material.This  
is harmless and will subside quickly.  
It is recommended that you do not  
sleep on the electric blanket when it  
is switched on. Should you choose to  
leave your blanket on all night; setting  
1 can be used.  
Your blanket has a detachable  
controller and waterproof element  
which makes your blanket safe to  
machine wash.  
An audible click will be heard when  
selecting the temperature setting.  
The ‘On’ light will also illuminate to  
indicate that the electric blanket is  
on and heating.Additional heating  
selections can be made by sliding  
the switch to the desired temperature  
setting (between 1-3).  
To turn the electric blanket off, slide  
the switch to either the furthest  
upward or downward position, both  
these positions are marked with ‘0’.  
The ‘On’ light will turn off to indicate  
that the power has been turned off.  
9
KEB412_IB_FA.indd  
9
14/10/09 1:26 PM  
Care and Cleaning  
Do not dry clean. Do not iron. Use only the following instructions:  
Before cleaning, ensure that the  
Machine Washing  
controller is unplugged from the  
Your electric blanket can be washed  
power supply and detached from the  
blanket.  
in a domestic washing machine  
(size permitting) or by a commercial  
laundry.  
To wash your blanket in a domestic  
washing machine, wash on the WOOL  
or DELICATES setting using a neutral  
wool detergent or mild soapy solution.  
DO NOT wash on a HOT cycle, the  
temperature must be kept below  
40°C.  
Spot Cleaning  
Sponge the affected area using  
a luke warm neutral detergent or  
mild soapy solution. Follow this with  
a sponging using a clean water  
solution. Remove any excess water by  
compressing the wet area between  
absorbent towels.  
Do not use high speed or extra spin  
cycles.  
Do not machine wash with the  
control/s connected to the blanket.  
Hand Washing  
Immerse the electric blanket only in a  
luke warm neutral detergent or mild  
soapy solution.  
Soak for five minutes, remove from  
the solution, and gently squeeze the  
solution through the electric blanket.  
Rinse only the blanket only thoroughly,  
in clean luke warm water, gently  
squeeze and drain the excess water  
from the electric blanket.  
WARNING: Do not use  
the electric blanket if it  
is wet.  
Washing the Removable  
Fleecy Cover  
The KEB512, KEB532 and KEB542  
electric blankets have a fleecy  
electric blanket covering that can be  
removed and separately washed.  
CAUTION: The controller  
must be removed  
from the blanket when  
washing.  
Once removed from the rest of the  
electric blanket this cover can be  
either hand washed as per instructions  
listed above or machine washed.  
This fleecy cover can be washed in  
a domestic washing machine (size  
permitting) or by a commercial  
laundry.To wash this cover in a  
domestic washing machine, wash on  
the WOOL or DELICATES setting using a  
neutral wool detergent or mild soapy  
solution.  
CAUTION: Do not wring  
the electric blanket.  
WARNING: Never  
immerse the detachable  
controller in water or any  
other liquid.  
DO NOT wash on a HOT cycle, the  
temperature must be kept below 40°C  
centigrade.  
10  
KEB412_IB_FA.indd 10  
14/10/09 1:26 PM  
Do not use high speed or extra spin  
cycles.  
Once washed, ensure to stretched the  
blanket into its original shape whilst  
damp to prevent distortion during  
drying.  
Dry naturally by draping over a  
clothes lines or tumble dry in LOW  
setting only. Do not dry in a stretched  
position. Do not Iron.  
Drying  
Drape the electric blanket across a  
clothes line and drip dry. DO NOT use  
pegs to secure the electric blanket in  
position. DO NOT dry with a hair dryer  
or heater.  
Tumble Drying  
You may tumble dry your blanket on  
LOW setting for 15 minutes MAXIMUM.  
Smooth the blanket by gently pulling  
any creases out of the fabric.  
Do not dry with the control/s  
connected to the blanket.  
Storage  
When not in use, pack the electric  
blanket in its original packaging for  
best protection and store in a cool,  
clean and dry location.  
Avoid pressing sharp creases into the  
blanket and store where no objects  
will be placed upon it.  
Detach the control/s from the blanket  
when storing.  
NOTE: Store your controller  
during summer months while  
your blanket remains on  
the bed as a comfortable  
underblanket.  
11  
KEB412_IB_FA.indd 11  
14/10/09 1:26 PM  
Kambrook 36 Month Replacement Warranty  
In Australia, this Kambrook Replacement Warranty  
The Kambrook Replacement Warranty does not  
apply to any defect, deterioration, loss, injury or  
damage occasioned by, or as a result of, misuse  
or abuse, negligent handling or if the product has  
been used other than in accordance with the  
instructions.The Kambrook Replacement Warranty  
excludes breakables such as glass and ceramic  
items, consumable items and normal wear and  
tear.  
does not affect the mandatory statutory rights  
implied under the Trade Practices Act 1974  
and other similar State and Territory legislation  
relating to the appliance. It applies in addition  
to the conditions and warranties implied by that  
legislation.  
In New Zealand, this Kambrook Replacement  
Warranty does not affect your mandatory statutory  
rights implied under the Consumer Guarantees  
Act 1993 in relation to the appliance. It applies in  
This Kambrook Replacement Warranty is void if  
there is evidence of the product being tampered  
addition to the conditions and guarantees implied with by unauthorised persons.  
by that legislation.  
If the product includes one or a number of  
This Kambrook Replacement Warranty is valid only accessories only the defective accessory or  
in the country of purchase, but other statutory  
warranties may still apply.  
product will be replaced. Subject to your statutory  
rights, in the event of Kambrook choosing  
to replace the appliance, the Kambrook  
Replacement Warranty will expire at the original  
date, i.e. 36 months from the original date of  
purchase.  
This Warranty card and the purchase receipt for this  
product are to be retained as proof of purchase  
and must be presented if making a claim under  
the Kambrook Replacement Warranty. Please note  
that under any applicable statutory warranty you  
In the event that you need some assistance  
are not required to produce these documents, but with your Kambrook appliance, please contact  
may be required to provide a proof of purchase.  
our Customer Service Department on 1300 139  
798 (Australia) or 09 271 3980 (New Zealand).  
Alternatively, visit us on the website at  
www.kambrook.com.au  
Kambrook warrants the purchaser against defects  
in workmanship and material for a period of 36  
months domestic use from the date of purchase  
(or 3 months commercial use).  
Kambrook 36 Month Replacement Warranty  
Your Purchase Record (Please Complete)  
Attach a copy of the purchase receipt  
here.  
Date Of Purchase ________________________________  
Model Number ___________________________________  
Serial Number ____________________________________  
Purchased From __________________________________  
(Please don’t return purchase record  
until you are making a claim)  
Kambrook - New Zealand  
Private Bag 94411  
Botany, Manukau  
Auckland 2141  
New Zealand  
Customer Service Line/Spare Parts  
0800 273 845 or 09 271 3980  
Kambrook - Australia  
Building 2, Port Air Industrial Estate  
1A Hale Street  
Botany NSW 2019  
Australia  
Customer Service Line 1300 139 798  
Customer Service Fax 1800 621 337  
Customer Service Fax 0800 288 513  
Due to continual improvement in design or otherwise, the product you  
purchase may differ slightly from the illustration in this book. Issue 1/10  
KEB412_IB_FA.indd  
1
14/10/09 1:26 PM  

Rockford Fosgate FRC2369 User Manual
Precision Power 355cs User Manual
Philips CED750 User Manual
Nikon Camcorder S4400 User Manual
Nikon Camcorder D5300 User Manual
Morphy Richards Blender 48544 User Manual
Mercedes Benz Car Amplifier Audio 50 User Manual
KitchenAid Blender 5KSB555AER User Manual
Kenwood KDC MP149 User Manual
JVC TS C421SPGU User Manual