TANDBERG Computer Monitor 1 User Manual

3G Gateway Installation  
1
2
3
LAN4  
LAN4  
LAN3  
LAN3  
LAN2  
LAN2  
LAN1  
LAN1  
L A N 1  
L A N 2  
L A N 3  
L A N 4  
Connect the Ethernet LAN cable to socket LAN 1.  
Connect the null modem cable between the Data  
socket and a PC.  
Mount the rack ears and/or rubber feet, if  
applicable, and turn the unit back on its feet  
or mount it in the rack.  
Unpack the 3G Gateway.  
4a  
4b  
4c  
I
I
I
o
o
o
Depending on version, connect the PRI connector …  
or...  
connect the 4 PRI connectors …  
or...  
… connect the 4 BRI connectors.  
1. Start a Terminal program on the PC and configure it to  
115200,ꢀ8,ꢀ1,ꢀNone  
I
2. When prompted for login, enter username admin and  
password TANDBERG.  
5
6
o
3. Type y to start the installation wizard and press Enter.  
4. When prompted, specify a new password, IP settings, lo-  
I
o
cal prefix, SSH y/n, and Telnet y/n.  
5. When prompted for login, enter username admin and your  
new password.  
6. Press Enter to skip the installation wizard.  
7. Reboot the system by typing the command xcommand  
boot  
Connect the power cable and turn on the 3G  
Gateway. Use the LCD display of the unit to set  
the IP address – see Configuring the 3G Gateway  
in the User Manual for details, or...  
Start a Terminal program on the PC  
and configure it to 115200,ꢀ8,ꢀ1,ꢀNone  
8. Do the rest of the configuration from the web interface.  
115196 rev. 02  
 

Shure Stereo Amplifier SR105 User Manual
Sony DVD Player DAV HDX501W DAV HDX500 User Manual
Sony MP3 Player CFD E10 User Manual
Sony TV DVD Combo KV 27FA210 User Manual
Sony VCR DSR V10 User Manual
Sony VCR SVX 800 User Manual
Summit Gas Grill S 670 User Manual
Sunbeam Slow Cooker HP8555 User Manual
SVAT Electronics Digital Camera GX5204 User Manual
Swann Home Security System Hd590 User Manual