Sunbeam Espresso Maker EM0180 User Manual

Cafe Creamy™  
Automatic Milk Frother  
Instruction and Recipe Booklet  
EM0180  
Please read these instructions carefully  
and retain for future reference.  
 
Sunbeam’s Safety Precautions  
SAFETY PRECAUTIONS FOR YOUR SUNBEAM  
• Never fill the jug above the ‘max’ indication as  
hot contents may be ejected.  
CAFE CREAMY  
.
• After foaming and heating milk the empty  
appliance needs approximately 4 minutes to cool  
down. The appliance can only be operated again  
after cooling.  
• Do not touch the heating element surface during  
or after operation as this may result in burning.  
• Always use the handle on the milk jug when using  
this appliance.  
• Intended for heating, foaming and blending milk  
only.  
• Only operate the appliance when the milk jug is  
correctly attached.  
• The milk frother is only intended for use with the  
jug provided.  
• Do not insert foreign objects such as knives or  
forks into the milk jug while in operation.  
• Always secure the milk jug lid before operation,  
as hot contents may be ejected during use.  
• Only operate when the milk jug is filled above the  
‘min’ indication. Do not use when empty.  
Sunbeam is very safety conscious when designing • Do not use an appliance for any purpose  
and manufacturing consumer products, but it is  
essential that the product user also exercise care  
when using an electrical appliance. Listed below  
are precautions which are essential for the safe  
use of an electrical appliance:  
• Read carefully and save all the instructions  
provided with an appliance.  
other than its intended use.  
• Do not place an appliance on or near a hot gas  
flame, electric element or on a heated oven.  
• Do not place on top of any other appliance.  
• Do not let the power cord of an appliance hang  
over the edge of a table or bench top or touch  
any hot surface.  
• Always turn the power off at the power outlet  
before you insert or remove a plug. Remove  
by grasping the plug - do not pull on the cord.  
Turn the power off and remove the plug  
when the appliance is not in use and  
before cleaning.  
• Do not use your appliance with an extension  
cord unless this cord has been checked  
and tested by a qualified technician or  
service person.  
• Always use your appliance from a power  
outlet of the voltage (A.C. only) marked  
on the appliance.  
• This appliance is not intended for use by  
persons (including children) with reduced  
physical, sensory or mental capabilities, or  
lack of experience and knowledge, unless they  
have been given supervision or instruction  
concerning use of the appliance by a person  
responsible for their safety.  
• Do not operate any electrical appliance with  
a damaged cord or after the appliance has  
been damaged in any manner. If damage is  
suspected, return the appliance to the nearest  
Sunbeam Appointed Service Centre  
for examination, repair or adjustment.  
• For additional protection, Sunbeam  
recommend the use of a residual current  
device (RCD) with a tripping current not  
exceeding 30mA in the electrical circuit  
supplying power to your appliances.  
• Do not immerse the appliance in water  
or any other liquid unless recommended.  
• Appliances are not intended to be operated  
by means of an external timer or separate  
remote control system.  
• This appliance is intended to be used in  
household and similar applications such  
as: staff kitchen areas in shops, offices and  
other working environments; farm houses; by  
clients in hotels, motels and other residential  
type environments; bed and breakfast type  
environments.  
• Children should be supervised to ensure that  
they do not play with the appliance.  
• The temperature of accessible surfaces may be  
high when the appliance is operating.  
• Never leave an appliance unattended while  
in use.  
If you have any concerns regarding the performance and use of your appliance,  
Ensure the above safety precautions are understood.  
1
 
Features of your Sunbeam  
Cafe Creamy™  
Plastic Lid  
Ensures no spillage while heating, foaming or  
blending milk.  
Foam Blender Attachment (Labelled ‘FOAM’)  
Create hot, foamed milk for your coffee.  
Jug Handle  
Allows easy handling before and after  
operation, and while milk jug is hot.  
Milk Jug  
250mL capacity is large enough to create  
frothy milk for two standard coffees.  
Easily removed for cleaning.  
Push Button Control Panel  
Easy to use control panel delivers cold milk,  
hot milk or foamed milk.  
2
 
Filling level indicators  
With ‘max’ and ‘min’ level indication marks  
Power base  
With a powerful 650W element for heating,  
foaming and blending milk quickly.  
Automatic Temperature Control  
Ensures milk does not burn during heating  
and foaming process.  
Accessory Storage  
Blending attachments can be stored easily  
underneath the power base, clipping into  
place using magnets.  
Accessories  
Milk Mixing Attachment (Labelled ‘MIX’)  
Blends chocolate powder with milk to create  
either hot chocolate or cold chocolate drinks.  
Foam Blender Attachment (Labelled ‘FOAM’)  
Create hot, foamed milk for your coffee.  
Cord Storage  
Non-slip rubber feet  
Makes the unit sturdy, preventing it from  
slipping or scratching the bench top.  
3
 
Using your Cafe Creamy™  
Automatic Milk Frother  
Before using your Cafe Creamy™ Automatic  
Milk Frother for the first time, wash the milk  
jug and plastic lid in warm, soapy water.  
Rinse and dry thoroughly. Repeat with the  
foam and milk mixing attachments located  
underneath the power base.  
Note: Do not immerse the power base in  
water or any other liquid, or allow moisture  
to come into contact with these parts.  
See Figure 1.  
Preparing Hot Milk Beverage with Foam  
1.Remove the milk jug from the power base.  
2.Open the lid of the milk jug and insert the  
foam blender attachment into the base of  
the milk jug.  
3.Pour milk into the milk jug, to a maximum  
of 250mL, the level that is marked with  
‘M’ for max. See Figure 3.  
Tip: To create a frothy hot chocolate, simply  
add 1-2 tablespoons of chocolate powder.  
Figure 1  
Figure 3  
Note: If you fill the milk jug above the  
maximum level, hot milk may be ejected  
during operation.  
Note: The milk jug must also be filled above  
the minimum level, as indicated by ‘O’  
symbol, to operate properly.  
4.Secure the lid onto the milk jug  
5.Plug the power cord into a 230-240V AC  
power outlet and switch the power on and  
place the milk jug on the heating element  
on the power base.  
Note: The appliance does not have an on/  
off button. Functions are activated through  
pressing feature buttons located on the  
control panel.  
Figure 2  
Note: Do not place any part of the appliance  
in the dishwasher.  
Note: To stop the appliance at any time, press  
the button on the control panel originally  
activated again.  
4
 
Using your Cafe Creamy Automatic Milk Frother (continued)  
Preparing Hot Milk Beverages  
1.Remove the milk jug from the power base.  
6.Press the  
foam milk button to begin the  
milk foaming function. In approximately  
1 to 2 minutes, dependent on the volume  
of milk, the appliance will automatically  
switch off and you will be left with hot,  
foamed milk in the milk jug.  
Note: The foam milk button selected will  
remain illuminated during operation, and will  
turn off automatically when the milk foaming  
is complete.  
Note: Only remove the milk jug from the  
power base to pour using the jug handle, as  
the milk jug body may be hot. Do not drink  
directly out of the milk jug.  
2.Open the lid of the milk jug and insert the  
milk mixing attachment into the base of  
the milk jug.  
3.Pour milk into the milk jug, to a maximum  
of 250mL, the level that is marked with  
‘M’ for max. See Figure 3.  
Note: If you fill the milk jug above the  
maximum level, hot milk may be ejected  
during operation.  
Note: The milk jug must also be filled above  
the minimum level, as indicated by ‘O’  
symbol, to operate properly.  
Note: Flashing control panel lights indicate  
the appliance is cooling down. Please wait  
approximately 4 minutes before restarting the  
appliance.  
7.Follow cleaning instructions in the ‘Care  
and Cleaning Instructions’ section of this  
manual found on page 7, after use to  
ensure long life.  
4.Add 1-2 tablespoons of chocolate powder  
or an espresso shot and secure the lid onto  
the milk jug  
5.Plug the power cord into a 230-240V AC  
power outlet and switch the power on and  
place the milk jug on the heating element  
on the power base.  
Note: This appliance does not have an on/  
off button. Functions are activated through  
pressing feature buttons located on the  
control panel.  
6.Press the  
mix hot milk button to  
begin the milk blending function. In  
approximately 1 to 2 minutes, dependent  
on the volume of milk, the appliance will  
automatically switch off and you will be  
left with a hot milk beverage in the milk  
jug.  
Note: The blend milk button selected will  
remain illuminated during operation, and will  
turn off automatically when the milk blending  
and heating is complete.  
Note: Only remove the milk jug from the  
power base to pour using the jug handle, as  
the milk jug body may be hot. Do not drink  
directly out of the milk jug.  
5
 
Using your Cafe Creamy Automatic Milk Frother (continued)  
Note: Flashing control panel lights indicate  
the appliance is cooling down. Please wait  
approximately 4 minutes before restarting the  
appliance.  
Note: The blend cold milk button selected  
will remain illuminated during operation,  
and will turn off automatically when the milk  
blending and heating is complete.  
7.Follow cleaning instructions in the ‘Care  
and Cleaning Instructions’ section of this  
manual found on page 7, after use to  
ensure long life.  
7.Follow cleaning instructions in the ‘Care  
and Cleaning Instructions’ section of this  
manual found on page 7, after use to  
ensure long life.  
Preparing Cold Milk Beverages  
1.Remove the milk jug from the power base.  
2.Open the lid of the milk jug and insert the  
milk mixing attachment into the base of  
the milk jug.  
3.Pour ice-cold milk into the milk jug, to  
a maximum of 250mL, the level that is  
marked with ‘M’ for max. See Figure 3.  
Note: If you fill the milk jug above the  
maximum level, milk may be ejected during  
operation.  
Note: The milk jug must also be filled above  
the minimum level, as indicated by ‘O’  
symbol, to operate properly.  
4.Add 1-2 tablespoons of chocolate powder,  
instant coffee or an espresso shot.  
5.Plug the power cord into a 230-240V AC  
power outlet and switch the power on and  
place the milk jug on the heating element  
on the power base.  
Note: The appliance does not have an on/  
off power button. Functions are activated  
through pressing feature buttons located on  
the control.  
6.Press the  
mix cold milk button to  
begin the cold milk blending function. In  
approximately 3 minutes, the appliance  
will automatically switch off and you will  
be left with cold milk beverage in the milk  
jug. Pour into a glass filled with ice to  
keep cool.  
6
 
Care and Cleaning Instructions  
Always disconnect the Cafe Creamy™ from  
the power outlet before cleaning any parts.  
Cleaning the Milk Jug and Blending Attachment  
after use  
After removing the milk jug from the power  
base and emptying its contents, wait for  
the milk jug to cool down. Then remove the  
blender attachment from the base of the milk  
jug. When cleaning the inside of the milk jug  
and blending attachment, hand-wash only  
using a sponge or a soft brush together with  
normal dish washing liquid. Be careful when  
cleaning the base of the milk jug where the  
heating element has contact, as it must not  
be scratched.  
Note: Before cleaning after use, wait for the  
appliance to cool down.  
Note: Do not immerse the power base in  
water or any other liquid, or allow moisture to  
come into contact with these parts.  
See Figure 1.  
Note: Do not place any part of the appliance  
in the dishwasher.  
Preparing for use  
Before using your Cafe Creamy™ Automatic  
Milk Frother for the first time, wash the milk  
jug and plastic lid in warm, soapy water.  
Rinse and dry thoroughly. Repeat with the  
foam blender and milk mixing attachments  
located underneath the power base.  
Cleaning the power base in case of spillage  
If milk spills onto the power base, switch off  
the power outlet immediately and remove the  
plug. Using a damp cloth gently wipe spillage  
from power base. Ensure appliance is dry  
before plugging into power outlet.  
Note: Do not use any solvents or abrasive  
agents for cleaning. Do not use and sharp  
or hard instruments such as steel wool for  
cleaning.  
7
 
Notes  
 
12 Month Replacement Guarantee  
In the unlikely event that this appliance develops any malfunction  
within 12 months of purchase (3 months commercial use) due to  
faulty materials or manufacture, we will replace it for you  
free of charge.  
Should you experience any difficulties with  
your appliance, please phone our customer  
service line for advice on 1300 881 861 in  
Australia, or 0800 786 232 in New Zealand.  
Alternatively, you can send a written claim  
to Sunbeam at the address listed below.  
On receipt of your claim, Sunbeam will  
seek to resolve your difficulties or, if the  
appliance is defective, advise you on how  
to obtain a replacement or refund.  
In Australia you are entitled to a  
replacement or refund for a major failure and  
for compensation for any other reasonably  
foreseeable loss or damage. You are also  
entitled to have the goods repaired or  
replaced if the goods fail to be of acceptable  
quality and the failure does not amount to  
a major failure.  
Should your appliance require repair or  
service after the guarantee period, contact  
your nearest Sunbeam service centre.  
Your Sunbeam 12 Month Replacement  
Guarantee naturally does not cover misuse  
or negligent handling and normal wear and  
tear.  
For a complete list of Sunbeam’s authorised  
service centres visit our website or call:  
Australia  
Similarly your 12 Month Replacement  
Guarantee does not cover freight or any other  
costs incurred in making a claim. Please  
retain your receipt as proof of purchase.  
1300 881 861  
Units 5 & 6, 13 Lord Street  
Botany NSW 2019 Australia  
The benefits given to you by this guarantee  
are in addition to your other rights and  
remedies under any laws which relate to the  
appliance.  
New Zealand  
0800 786 232  
26 Vestey Drive, Mt Wellington  
Auckland, New Zealand  
Our goods come with guarantees that cannot  
be excluded under the Australian Consumer  
Law and under the New Zealand Consumer  
Guarantees Act.  
 
Need help with your appliance?  
Contact our customer service team or visit  
our website for information and tips on  
getting the most from your appliance.  
In Australia  
Or call 1300 881 861  
In New Zealand  
Or call 0800 786 232  
is a registered trademark.  
‘Cafe Creamy’ is a trademark of Sunbeam Corporation.  
Made in China.  
Due to minor changes in design or otherwise,  
the product may differ from the one shown in this leaflet.  
© Copyright. Sunbeam Corporation Limited 2010.  
ABN 45 000 006 771  
Units 5 & 6, 13 Lord Street  
Botany NSW 2019 Australia  
Unit 3, Building D  
26 Vestey Drive  
Mt Wellington Auckland  
New Zealand  
Sunbeam Corporation is a division of GUD Holdings Ltd.  
9/11  
 

Sony Camcorder TS DSC S40 01 User Manual
Sony Car Speaker NS410 User Manual
Sony Cassette Player WM EC1 User Manual
Sony Digital Camera Alpha 100 User Manual
Sony MiniDisc Player NH MDAA3 User Manual
Sony Stereo Receiver 3 289 204 121 User Manual
SOYO Computer Hardware SY 7VCA User Manual
Speco Technologies Security Camera HT INTB4 User Manual
Stanley Black Decker Video Game Furniture RV06 User Manual
Swann Security Camera SW C DPCC User Manual