USB 3.0 to 3.5” SATA III Upright HDD
Enclosure with UASP
S3510BMU33B
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 03/05/2014
Table of Contents
Product Overview ..................................................................................1
Rear View...................................................................................................................................................... 1
Side View...................................................................................................................................................... 1
Introduction............................................................................................2
Packaging Contents ................................................................................................................................. 2
System Requirements.............................................................................................................................. 2
Hardware Installation............................................................................2
How to Use ..............................................................................................3
Connecting the Hard Drive.................................................................................................................... 3
Disconnecting the Hard Drive.............................................................................................................. 3
Initializing the Hard Drive ...................................................................................................................... 4
Specifications..........................................................................................6
Technical Support ..................................................................................7
Warranty Information............................................................................7
Instruction Manual
i
Product Overview
Rear View
Power Switch
USB 3.0 type B
Fan switch
Power Connector
Side View
Power/Activity LED
Cooling Fan
Instruction Manual
1
Introduction
Packaging Contents
•
•
•
•
•
•
1x USB 3.0 SATA 3.5in Hard Drive Enclosure
1x Pack of Foam Spacers
1x 3ft USB 3.0 Cable
1x Universal Power Adapter
3x Power Adapter Plug (NA/UK/EU)
1x Instruction Manual
System Requirements
•
•
•
Computer system with available USB 3.0 (5 Gbit/s) port or USB 2.0 port (480Mbps)
3.5”SATA Hard Drive (HDD)
Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7/8/8.1 (32/64-bit),
or Apple® Mac® OS 9.x/10, or Linux®
Hardware Installation
WARNING! Hard drives and storage enclosures require careful handling, especially
when being transported. If you are not careful with your hard disk, lost data may
result. Always handle your hard drive and storage device with caution. Be sure that
you are properly grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds.
1. Set the enclosure on a flat surface, with the cooling fan facing downwards.
2. On the top panel, remove the two small screws at the corners. Remove the top
panel.
3. Located at the opposite end from the internal SATA connectors is a small plastic
wedge. Flip the wedge up and out of the enclosure.
4. Place the 3.5”SATA hard drive into the enclosure and then slide it into the SATA
connectors.
Instruction Manual
2
5. Flip the wedge down again, to secure the hard drive. For thinner hard drives, an
optional, thicker foam pad is included.
6. Place the top panel back on to the enclosure and fasten the two corner screws and
stand the enclosure back up.
7. Connect the external power adapter to the enclosure and flip the power switch to
the “1”position. The enclosure and hard drive will power up.
8. Connect the USB cable from the enclosure to the computer system.
How to Use
Connecting the Hard Drive
Once the enclosure has been attached to a computer, and the OS has installed the
necessary software, the drive will be accessible as though it were installed within the
system.
Prior to using the drive, it will need to be formatted according to your operating
system requirements. To format your newly attached hard drive, or create partitions,
please see the Initializing the Hard Drive section.
LED Indicator
The hard drive enclosure offers an LED indicator, to enable you to monitor drive
activity. When the enclosure is powered, the LED will illuminate. While the hard drive
is being accessed, the LED will blink. Do not remove the enclosure from the host
computer while the LED is flashing, as it could damage the drive or the enclosure,
resulting in data loss.
Disconnecting the Hard Drive
Windows
1. Select the “Safely remove Hardware and Eject Media”icon, located in the task bar.
2. Select the storage device from the list that appears.
3. Wait for the message indicating that it is now safe to remove the device.
Note: Removing the connected drive prior to receiving notification that it is safe to
do so, could result in losing or corrupting data stored on the drive. Once the Safe
to Remove Hardware message appears, please disconnect the enclosure from the
computer by removing the USB connection.
Instruction Manual
3
Mac OS X
To safely disconnect the attached drive from the host computer, close any windows
listing the contents of the removable drive. Once all windows are closed, click on the
USB storage icon on the desktop, and drag it to the Trash Can icon on the desktop.
Allow 5 seconds before physically removing the enclosure/drive from the computer.
Initializing the Hard Drive
1. If the SATA Hard Drive is blank it may need to be initialized and formatted before
use. From the main Windows desktop, right-click on “My Computer”(“Computer”in
Vista/ 7 / 8/ 8.1), then select Manage. In the new Computer Management window,
select Disk Management from the left window panel.
2. A dialog window should automatically appear, asking you to initialize the drive.
Depending on the version of Windows, it will give you the option of either creating
an “MBR”or “GPT”disk. GPT (GUID partition) is required for drives larger than 2TB but
is not compatible with some older operating systems, while MBR is supported by
newer and older operating systems.
3. Once initialized, locate the Disk that says it is “Unallocated”(check the listed hard
drive capacity to confirm it’s the correct hard drive) and then right-click in the
section that says “Unallocated”and select “New Partition”.
Instruction Manual
4
4. Follow the on screen prompts to initialize the drive in the format of your choice.
Instruction Manual
5
Specifications
Host Interface
USB 3.0
External Connectors
1 x USB 3.0 B
1 x 15 pin SATA Power female
1 x 7 pin SATA Data male
Internal Connectors
Maximum Data Transfer Rate
USB 3.0: 5 Gbit/s
Windows 2000/XP/Server 2003/Vista/
Server 2008 R2/7/8/8.1 (32/64-bit), Mac OS
9/10, Linux
Compatible Operating Systems
Instruction Manual
6
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
7
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
|