Remington Styling Iron S 8000i User Guide

next generation ceramic straightener  
dries as it straightens  
TM  
Use and  
Care Guide  
The ultimate defense  
against damage  
S-8000i  
 
Product Features  
(A) Steam vents and channels  
(Bs Ceramic coating  
(C) Ionic conditioning  
(D) LCD display  
pressed,the unit will turn itself off  
when the LCD stops blinking.  
Thank you for purchasing the  
®
Remington wet2straight™  
straigtener.This unique styler  
combines optimum styling  
features with cutting-edge  
protection.Please carefully read  
the instructions contained in  
this booklet, and keep them in a  
safe place for future reference.  
Automatic worldwide voltage  
This appliance contains a special electronic  
circuit that automatically converts it for  
worldwide usage– from 100 to 240 volts  
AC,50 to 60 Hz.Just plug it into the local  
outlet and use it as normal; the styler will  
automatically adjust to the local current.  
(You may need an adapter to allow the plug  
to fit into the local outlets,however.)  
*
*
(E) Steam icon  
*
*
(F) Numerical heat setting indicator  
(G) Graphic heat setting indicator  
(H) +/- Temperature controls  
(I) ON/OFF button  
(J) Swivel cord  
(K) Closing lock  
(A)  
*
*
*
*
*
(C)  
(B)  
Key Features  
3X Protection:  
*
3X Protection products from Remington®  
have an exclusive Teflon® plus Ceramic  
coating and Ions for the ultimate defense  
against damage for superior shine.  
Unique steam vent and channel design:  
Unique steam vents and channels allow this  
styler to be safely used on wet or dry hair.  
The channels extract moisture from damp  
hair and allow steam to escape through the  
vents,drying hair and sealing the cuticle at  
the same time.Creates salon straight,shiny  
hair in less time,with less damage.  
(D)  
1. Teflon® coating:  
(H)  
(I)  
Non-stick Teflon® coating glides through  
any type of hair, preventing static,sticki-  
ness, and build-up of mousses,gels,and  
hair sprays for smooth,shiny results –  
every time.  
(E)  
(F)  
(G)  
Display:  
The Liquid Crystal Display (LCD) indicates  
the heat setting numerically and with a  
circle of bars. A steam icon appears when  
you have selected a setting appropriate for  
use on wet hair – settings of 16 and higher.  
2.Ceramic coating:  
Ceramic protects against damaging hot  
spots with high,even heat to lock in  
moisture and create long-lasting styles.  
(J)  
Automatic shutoff:  
3.Ionic conditioning:  
This styler is equipped with automatic  
shutoff.This safety feature turns the unit off  
after 60 minutes,in case you accidentally  
leave it on after styling your hair. Before  
turning itself off the LCD will flash for 10  
seconds,giving you the chance to stop the  
shutoff process.While the LCD is flashing,  
simply press the +/- button to use the styler  
for another 45 minutes. If no button is  
Negative ions are created,neutralizing  
positive ions to reduce static and the  
frizzies, leaving your hair looking shiny  
and healthy.  
(K)  
4
5
 
How to Use  
Usage Tips  
6. Take a small section of hair and comb  
Heat Settings  
Locking Switch  
Straightening Your Hair  
1. Gently towel dry hair to remove excess  
water. Avoid rubbing hair with a towel,  
as this creates split ends and frizziness.  
Detangle hair with a wide-toothed comb.  
2. Plug the straightener into an electrical  
outlet. Press and hold theON/OFFbutton  
until the unit turns on and the LCD lights up.  
3. The straightener will initially heat to  
setting 15. Adjust the temperature  
using the +/- buttons.The bars on the  
LCD will flash while the unit heats up,  
then glow steadily when it has reached  
the selected temperature.The styler will  
beep three times when it is ready for use.  
4. Divide hair into manageable sections  
and clip the upper layers on top of your  
head and out of the way. Work with  
underneath layers first.  
5. Test the styler on a small section of hair,  
then adjust the temperature up or down  
before styling the rest of your hair.  
NOTE:  
If you find that you need a higher  
setting while straightening your hair,  
simply adjust the temperature by  
pressing the "+" button. The unit  
will beep when it reaches the new  
temperature.  
through it with a fine-toothed comb.  
Pull hair down and away from your  
scalp,and hold it taut.  
Take extra care when using a professional  
styler. To prevent hair damage,make sure  
to use the correct temperature setting for  
your hair type.  
This professional straightener has a locking  
switch to make the unit easier to store. To  
lock,simply squeeze the plates together  
and push the switch to the lock position. To  
unlock,slide the switch to the unlock posi-  
tion. NOTE:Do not heat the unit in the  
locked position.  
7. Hold the straightener with the LCD  
and steam vents facing away from  
your scalp. Starting at the roots, clamp  
hair firmly between the plates and run  
the styler down the entire hair strand,  
from root to tip,in one smooth stroke.  
Do not hold it in one area for a long  
period of time or damage to hair may  
occur.  
8. To speed up drying at the roots,you  
may wish to run the styler over the first  
few inches of hair nearest the root sev-  
eral times. Repeatedly run the unit  
smoothly down the entire strand until  
hair is fully dried. (NOTE: The unit  
may make a steaming/hissing noise  
when used on damp hair. This is  
okay! The unique design of this  
styler will channel the moisture away  
from hair and out the steam vents.)  
9. Repeat with all sections of your hair,  
working with the underneath layers  
first,then the top and sides,until hair  
is fully dried.  
Setting  
Hair Type  
A. 1-4  
Dry Hair. Very fine,fragile  
or damaged hair  
B. 5-8  
Dry Hair. Normal,easy to  
straighten hair  
C. 9-12  
D. 13-16  
E. 17-20  
F. 21-25  
G. 26-30  
Dry Hair. Thick,difficult to  
straighten hair  
Damp Hair. Very fine,  
fragile or damaged hair  
Wet Hair. Normal,easy to  
straighten hair  
10. When you are finished styling,press  
and hold theON/OFF button to turn the  
unit off,unplug it,and allow it to cool  
before storing.  
While straightening your hair, if you  
find that you need a lower setting,  
adjust the temperature by pressing  
the "-" button. Because the unit  
is already hot,it may take a few  
Wet Hair. Wavy or thick,  
difficult to straighten hair  
Wet Hair. Coarse,highly  
resistant hair in good  
condition  
minutes to cool off.It will beep when  
it cools to the lower temperature.  
6
7
 
Maintenance and Troubleshooting  
Performance Guarantee  
120-240 VAC 50-60 Hz  
Error Messages  
Cleaning  
Full Two-Year Warranty  
Make sure the unit is unplugged and cool.  
Use a damp cloth to clean the plates and  
the outside of the power handle.No other  
maintenance of the unit is required.  
Rayovac Corporation warrants this product  
against any defects that are due to faulty  
material or workmanship for a two-year  
period from the original date of consumer  
purchase.This warranty does not include  
damage to the product resulting from  
accident or misuse.  
rE  
Questions or comments:  
Call 800-736-4648 in U.S. or  
800-268-0425 in Canada.  
Your straightener will display an rEmes-  
sage if it has a recoverable error or mal-  
function.If this happens,turn the unit off,  
unplug it,and allow it to cool for 10–15  
minutes.Then plug it in and turn it on again.  
If the message displays again,call  
800-736-4648 in U.S.or 800-268-0425  
in Canada.  
Remington and wet2straight are trademarks  
of Rayovac Corporation.  
Teflon is a registered trademark of E.I.du Pont de  
Nemours Company and is used under license by  
Rayovac Corporation.  
Storage  
Unplug the unit whenever it is not in use.  
Allow it to cool,then store it out of reach of  
children in a safe,dry location.  
If the product should become defective  
within the warranty period,we will repair it  
or elect to replace it free of charge.Please  
call 800-736-4648 or 800-268-0425 in  
Canada for details.  
Patent Pending  
Never wrap the cord around the appliance,  
since this will cause the cord to wear  
prematurely and break.Handle the cord  
carefully and avoid jerking,twisting,or  
straining it,especially at plug connections.  
1E,2E,3E  
If the LCD displays a 1E,2Eor 3E”  
message,turn the unit off and unplug it.Do  
not attempt to use it.Call 800-736-4648 in  
U.S.or 800-268-0425 in Canada.  
©2004 R.C.  
6/04 Job# WPC04-038 Part#15706  
RAYOVAC SHALL NOT BE  
RESPONSIBLE FOR ANY INCIDENTAL,  
SPECIAL OR CONSEQUENTIAL  
DAMAGES.  
Rayovac Corporation  
800-736-4648  
This warranty gives you specific legal rights  
and you may also have other rights which  
vary from state to state or province to  
province.Some states do not allow the  
exclusion or limitation of incidental,special  
or consequential damages.  
MADE IN CHINA  
Rayovac Canada Ltd.  
800-268-0425  
Rayovac Money-back Offer  
If within 30 days after you have purchased  
your Remington® branded product,you are  
not satisfied and would like a refund,return  
it with the sales slip indicating purchase  
price and date of purchase to the retailer  
from whom it was purchased.Rayovac will  
reimburse all retailers who accept the  
product within 30 days from the date of  
purchase.If you have any questions con-  
cerning the money-back guarantee,please  
call 800-736-4648 or 800-268-0425 in  
Canada.  
8
9
 

Q See Security Camera QSTD User Guide
Radio Shack Calculator 65 541 User Guide
Raypak Indoor Fireplace RFSDV34RFNAU User Guide
Rival Fryer CZF630 User Guide
Roberts Radio Cassette Player TCR 200 User Guide
Rotel Stereo Amplifier RB930AX User Guide
Ryobi Drill D50VSR User Guide
Ryobi Outdoor Trimmer PBC3046B User Guide
Samsung Air Conditioner AD18B1C09 User Guide
Samsung Washer B1445A User Guide